Re: [PATCH 6/7] ARM: dts: omap4: update omap-control-usb nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 08/14/2013 11:41 AM, Benoit Cousson wrote:
> Hi Roger,
> 
> On 01/08/2013 16:05, Roger Quadros wrote:
>> Split otghs_ctrl and USB2 PHY power down into separate
>> omap-control-usb nodes. Update ti,mode property.
> 
> Nit: I guess you mean ti,type?

Right :).

> 
>> CC: Benoit Cousson <benoit.cousson@xxxxxxxxxx>
>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
>> ---
>>   arch/arm/boot/dts/omap4.dtsi |   17 ++++++++++++-----
>>   1 files changed, 12 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>> index 22d9f2b..9a6fa27 100644
>> --- a/arch/arm/boot/dts/omap4.dtsi
>> +++ b/arch/arm/boot/dts/omap4.dtsi
>> @@ -519,7 +519,7 @@
>>   			usb2_phy: usb2phy@4a0ad080 {
>>   				compatible = "ti,omap-usb2";
>>   				reg = <0x4a0ad080 0x58>;
>> -				ctrl-module = <&omap_control_usb>;
>> +				ctrl-module = <&omap_control_usb2phy>;
>>   			};
>>   		};
>>   
>> @@ -643,11 +643,17 @@
>>   			};
>>   		};
>>   
>> -		omap_control_usb: omap-control-usb@4a002300 {
>> +		omap_control_usb2phy: omap-control-usb@4a002300 {
>>   			compatible = "ti,omap-control-usb";
>> -			reg = <0x4a002300 0x4>,
>> -			      <0x4a00233c 0x4>;
>> -			reg-names = "control_dev_conf", "otghs_control";
>> +			reg = <0x4a002300 0x4>;
>> +			reg-names = "power";
>> +			ti,type = <2>;
> 
> Now that we can use the C preprocessor, it will be nice to use a macro instead of the value.
> 
> TYPE1 - if it has otghs_control mailbox register (e.g. on OMAP4)
> TYPE2 - if it has Power down bit in control_dev_conf register. e.g. USB2 PHY
> TYPE3 - if it has DPLL and individual Rx & Tx power control. e.g. USB3 PHY or SATA PHY
> TYPE4 - if it has both power down and power aux registers. e.g. USB2 PHY on DRA7
> 
> Well, assuming you can find macro names that can explain a little bit what the type is about :-)
> 
> That being said...
> Do you really need to expose the type here? Maybe with just a set of different compatible string you can figure out in the driver what type we are talking about.
> It is always better to minimize the amount of information we put in DT as soon as we can infer it from the compatible string.
> 
> So instead of using a generic "ti,omap-control-usb" string + "ti,type" you can potentially use several specific strings: ti,omap4-control-usb, ti,dra7-control-usb...
> Since the DT gurus are recommending to use specific compatible string as much as possible, this is maybe a better approach.
> 

Good point. I'll get rid of the type altogether and use the compatible string instead.

cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux