Palmas regulator SMPS10 is splitted into two regulators SMPS10-OUT1 and SMPS10-OUT2 to match with hw behavior. With this regulator's name got changed in driver. Update the DT binding document to match with driver. Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx> --- Changes from V1: Fix typos: palams ->palmas, mps to smps .../devicetree/bindings/regulator/palmas-pmic.txt | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt index 30b0581..a22e4c7 100644 --- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -25,8 +25,8 @@ Optional nodes: Additional custom properties are listed below. For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP, - smps45, smps457, smps7 depending on variant, smps6, smps[8-10], - ldo[1-9], ldoln, ldousb. + smps45, smps457, smps7 depending on variant, smps6, smps[8-9], + smps10_out2, smps10_out1, do[1-9], ldoln, ldousb. Optional sub-node properties: ti,warm-reset - maintain voltage during warm reset(boolean) -- 1.7.1.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
