Re: [PATCH] pwm: renesas-tpu: Add DT support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Thierry,

I'd like to get this patch in v3.12, could you please take it in your tree ?

On Friday 26 July 2013 00:27:41 Laurent Pinchart wrote:
> Specify DT bindings for the TPU PWM controller and add OF support to the
> driver.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/pwm/renesas,tpu-pwm.txt    | 28 +++++++++++++++
>  drivers/pwm/pwm-renesas-tpu.c                      | 41 +++++++++++++++----
>  2 files changed, 62 insertions(+), 7 deletions(-)
>  create mode 100644
> Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt
> 
> This patch depends on the "[PATCH v2 0/4] Add PWM polarity flag macro for
> DT" series that is scheduled for merge in the PWM tree, and should thus go
> in via the same tree.
> 
> The code has been tested on an Armadillo800EVA with additional platform
> patches that I'm going to submit next.
> 
> diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt
> b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt new file mode
> 100644
> index 0000000..b067e84
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt
> @@ -0,0 +1,28 @@
> +* Renesas R-Car Timer Pulse Unit PWM Controller
> +
> +Required Properties:
> +
> +  - compatible: should be one of the following.
> +    - "renesas,tpu-r8a73a4": for R8A77A4 (R-Mobile APE6) compatible PWM
> controller. +    - "renesas,tpu-r8a7740": for R8A7740 (R-Mobile A1)
> compatible PWM controller. +    - "renesas,tpu-r8a7790": for R8A7790 (R-Car
> H2) compatible PWM controller. +    - "renesas,tpu-sh7372": for SH7372
> (SH-Mobile AP4) compatible PWM controller. +    - "renesas,tpu": for
> generic R-Car TPU PWM controller.
> +
> +  - reg: Base address and length of each memory resource used by the PWM
> +    controller hardware module.
> +
> +  - #pwm-cells: should be 3. See pwm.txt in this directory for a
> description of +    the cells format. The only third cell flag supported by
> this binding is +    PWM_POLARITY_INVERTED.
> +
> +Please refer to pwm.txt in this directory for details of the common PWM
> bindings +used by client devices.
> +
> +Example: R8A7740 (R-Car A1) TPU controller node
> +
> +	tpu: pwm@e6600000 {
> +		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
> +		reg = <0xe6600000 0x100>;
> +		#pwm-cells = <3>;
> +	};
> diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c
> index 2600892..3eeffff 100644
> --- a/drivers/pwm/pwm-renesas-tpu.c
> +++ b/drivers/pwm/pwm-renesas-tpu.c
> @@ -20,6 +20,7 @@
>  #include <linux/ioport.h>
>  #include <linux/module.h>
>  #include <linux/mutex.h>
> +#include <linux/of.h>
>  #include <linux/platform_data/pwm-renesas-tpu.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> @@ -86,7 +87,7 @@ struct tpu_pwm_device {
> 
>  struct tpu_device {
>  	struct platform_device *pdev;
> -	struct tpu_pwm_platform_data *pdata;
> +	enum pwm_polarity polarities[TPU_CHANNEL_MAX];
>  	struct pwm_chip chip;
>  	spinlock_t lock;
> 
> @@ -228,8 +229,7 @@ static int tpu_pwm_request(struct pwm_chip *chip, struct
> pwm_device *_pwm)
> 
>  	pwm->tpu = tpu;
>  	pwm->channel = _pwm->hwpwm;
> -	pwm->polarity = tpu->pdata ? tpu->pdata->channels[pwm->channel].polarity
> -		      : PWM_POLARITY_NORMAL;
> +	pwm->polarity = tpu->polarities[pwm->channel];
>  	pwm->prescaler = 0;
>  	pwm->period = 0;
>  	pwm->duty = 0;
> @@ -388,6 +388,16 @@ static const struct pwm_ops tpu_pwm_ops = {
>   * Probe and remove
>   */
> 
> +static void tpu_parse_pdata(struct tpu_device *tpu)
> +{
> +	struct tpu_pwm_platform_data *pdata = tpu->pdev->dev.platform_data;
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(tpu->polarities); ++i)
> +		tpu->polarities[i] = pdata ? pdata->channels[i].polarity
> +				   : PWM_POLARITY_NORMAL;
> +}
> +
>  static int tpu_probe(struct platform_device *pdev)
>  {
>  	struct tpu_device *tpu;
> @@ -400,7 +410,11 @@ static int tpu_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  	}
> 
> -	tpu->pdata = pdev->dev.platform_data;
> +	spin_lock_init(&tpu->lock);
> +	tpu->pdev = pdev;
> +
> +	/* Initialize device configuration from platform data. */
> +	tpu_parse_pdata(tpu);
> 
>  	/* Map memory, get clock and pin control. */
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -422,11 +436,10 @@ static int tpu_probe(struct platform_device *pdev)
>  	/* Initialize and register the device. */
>  	platform_set_drvdata(pdev, tpu);
> 
> -	spin_lock_init(&tpu->lock);
> -	tpu->pdev = pdev;
> -
>  	tpu->chip.dev = &pdev->dev;
>  	tpu->chip.ops = &tpu_pwm_ops;
> +	tpu->chip.of_xlate = of_pwm_xlate_with_flags;
> +	tpu->chip.of_pwm_n_cells = 3;
>  	tpu->chip.base = -1;
>  	tpu->chip.npwm = TPU_CHANNEL_MAX;
> 
> @@ -457,12 +470,26 @@ static int tpu_remove(struct platform_device *pdev)
>  	return 0;
>  }
> 
> +#ifdef CONFIG_OF
> +static const struct of_device_id tpu_of_table[] = {
> +	{ .compatible = "renesas,tpu-r8a73a4", },
> +	{ .compatible = "renesas,tpu-r8a7740", },
> +	{ .compatible = "renesas,tpu-r8a7790", },
> +	{ .compatible = "renesas,tpu-sh7372", },
> +	{ .compatible = "renesas,tpu", },
> +	{ },
> +};
> +
> +MODULE_DEVICE_TABLE(of, tpu_of_table);
> +#endif
> +
>  static struct platform_driver tpu_driver = {
>  	.probe		= tpu_probe,
>  	.remove		= tpu_remove,
>  	.driver		= {
>  		.name	= "renesas-tpu-pwm",
>  		.owner	= THIS_MODULE,
> +		.of_match_table = of_match_ptr(tpu_of_table),
>  	}
>  };
-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux