[PATCH V3 2/3] ASoC: Samsung: I2S: Add quirks as driver data in I2S

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Samsung has different versions of I2S introduced in different
platforms. Each version has some new support added for multichannel,
secondary fifo, s/w reset control and internal mux for rclk src clk.
Each newly added change has a quirk. So this patch adds all the
required quirks as driver data and based on compatible string from
dtsi fetches the quirks.

Signed-off-by: Padmavathi Venna <padma.v@xxxxxxxxxxx>
---
 .../devicetree/bindings/sound/samsung-i2s.txt      |   21 +++---
 sound/soc/samsung/i2s.c                            |   82 +++++++++++++-------
 2 files changed, 64 insertions(+), 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
index 025e66b..b3f6443 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
@@ -2,7 +2,16 @@
 
 Required SoC Specific Properties:
 
-- compatible : "samsung,i2s-v5"
+- compatible : should be one of the following.
+   - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S. Previous versions
+     has only 8/16bit support.
+   - samsung,s3c6410-i2sv4: for 8/16/24bit multichannel(5.1 channel) I2S.
+     Introduced in s3c6410. This also applicable for s5p64x0 platforms.
+   - samsung,s5pc100-i2s: for 8/16/24bit multichannel(5.1 channel) I2S
+     with secondary fifo and s/w reset control.
+   - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with
+     secondary fifo, s/w reset control and internal mux for root clk src.
+
 - reg: physical base address of the controller and length of memory mapped
   region.
 - dmas: list of DMA controller phandle and DMA request line ordered pairs.
@@ -21,13 +30,6 @@ Required SoC Specific Properties:
 
 Optional SoC Specific Properties:
 
-- samsung,supports-6ch: If the I2S Primary sound source has 5.1 Channel
-  support, this flag is enabled.
-- samsung,supports-rstclr: This flag should be set if I2S software reset bit
-  control is required. When this flag is set I2S software reset bit will be
-  enabled or disabled based on need.
-- samsung,supports-secdai:If I2S block has a secondary FIFO and internal DMA,
-  then this flag is enabled.
 - samsung,idma-addr: Internal DMA register base address of the audio
   sub system(used in secondary sound source).
 - pinctrl-0: Should specify pin control groups used for this controller.
@@ -46,9 +48,6 @@ i2s0: i2s@03830000 {
 		<&clock_audss EXYNOS_I2S_BUS>,
 		<&clock_audss EXYNOS_SCLK_I2S>;
 	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-	samsung,supports-6ch;
-	samsung,supports-rstclr;
-	samsung,supports-secdai;
 	samsung,idma-addr = <0x03000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2s0_bus>;
diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c
index 47e08dd..8a5504c 100644
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -40,6 +40,7 @@ enum samsung_dai_type {
 
 struct samsung_i2s_dai_data {
 	int dai_type;
+	u32 quirks;
 };
 
 struct i2s_dai {
@@ -1032,18 +1033,18 @@ static struct i2s_dai *i2s_alloc_dai(struct platform_device *pdev, bool sec)
 
 static const struct of_device_id exynos_i2s_match[];
 
-static inline int samsung_i2s_get_driver_data(struct platform_device *pdev)
+static inline struct samsung_i2s_dai_data *samsung_i2s_get_driver_data(
+						struct platform_device *pdev)
 {
 #ifdef CONFIG_OF
-	struct samsung_i2s_dai_data *data;
 	if (pdev->dev.of_node) {
 		const struct of_device_id *match;
 		match = of_match_node(exynos_i2s_match, pdev->dev.of_node);
-		data = (struct samsung_i2s_dai_data *) match->data;
-		return data->dai_type;
+		return (struct samsung_i2s_dai_data *) match->data;
 	} else
 #endif
-		return platform_get_device_id(pdev)->driver_data;
+		return (struct samsung_i2s_dai_data *)
+				platform_get_device_id(pdev)->driver_data;
 }
 
 #ifdef CONFIG_PM_RUNTIME
@@ -1074,13 +1075,13 @@ static int samsung_i2s_probe(struct platform_device *pdev)
 	struct resource *res;
 	u32 regs_base, quirks = 0, idma_addr = 0;
 	struct device_node *np = pdev->dev.of_node;
-	enum samsung_dai_type samsung_dai_type;
+	struct samsung_i2s_dai_data *i2s_dai_data;
 	int ret = 0;
 
 	/* Call during Seconday interface registration */
-	samsung_dai_type = samsung_i2s_get_driver_data(pdev);
+	i2s_dai_data = samsung_i2s_get_driver_data(pdev);
 
-	if (samsung_dai_type == TYPE_SEC) {
+	if (i2s_dai_data->dai_type == TYPE_SEC) {
 		sec_dai = dev_get_drvdata(&pdev->dev);
 		if (!sec_dai) {
 			dev_err(&pdev->dev, "Unable to get drvdata\n");
@@ -1129,15 +1130,7 @@ static int samsung_i2s_probe(struct platform_device *pdev)
 			idma_addr = i2s_cfg->idma_addr;
 		}
 	} else {
-		if (of_find_property(np, "samsung,supports-6ch", NULL))
-			quirks |= QUIRK_PRI_6CHAN;
-
-		if (of_find_property(np, "samsung,supports-secdai", NULL))
-			quirks |= QUIRK_SEC_DAI;
-
-		if (of_find_property(np, "samsung,supports-rstclr", NULL))
-			quirks |= QUIRK_NEED_RSTCLR;
-
+		quirks = i2s_dai_data->quirks;
 		if (of_property_read_u32(np, "samsung,idma-addr",
 					 &idma_addr)) {
 			if (quirks & QUIRK_SEC_DAI) {
@@ -1250,27 +1243,60 @@ static int samsung_i2s_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct samsung_i2s_dai_data i2sv3_dai_type = {
+	.dai_type = TYPE_PRI,
+	.quirks = QUIRK_NO_MUXPSR,
+};
+
+static struct samsung_i2s_dai_data i2sv4_dai_type = {
+	.dai_type = TYPE_PRI,
+	.quirks = QUIRK_PRI_6CHAN | QUIRK_NO_MUXPSR,
+};
+
+static struct samsung_i2s_dai_data i2sv5_c100_dai_type = {
+	.dai_type = TYPE_PRI,
+	.quirks = QUIRK_PRI_6CHAN | QUIRK_NO_MUXPSR | QUIRK_SEC_DAI |
+			QUIRK_NEED_RSTCLR,
+};
+
+static struct samsung_i2s_dai_data i2sv5_dai_type = {
+	.dai_type = TYPE_PRI,
+	.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR,
+};
+
+static struct samsung_i2s_dai_data samsung_dai_type_sec = {
+	.dai_type = TYPE_SEC,
+};
+
 static struct platform_device_id samsung_i2s_driver_ids[] = {
 	{
-		.name           = "samsung-i2s",
-		.driver_data	= TYPE_PRI,
+		.name		= "samsung,s3c6410-i2s",
+		.driver_data	= (kernel_ulong_t)&i2sv3_dai_type,
+	}, {
+		.name		= "samsung,s3c6410-i2s-multi",
+		.driver_data	= (kernel_ulong_t)&i2sv4_dai_type,
+	}, {
+		.name		= "samsung,s5pc100-i2s",
+		.driver_data	= (kernel_ulong_t)&i2sv5_c100_dai_type,
 	}, {
-		.name           = "samsung-i2s-sec",
-		.driver_data	= TYPE_SEC,
+		.name		= "samsung,s5pv210-i2s",
+		.driver_data	= (kernel_ulong_t)&i2sv5_dai_type,
+	}, {
+		.name		= "samsung-i2s-sec",
+		.driver_data	= (kernel_ulong_t)&samsung_dai_type_sec,
 	},
 	{},
 };
 MODULE_DEVICE_TABLE(platform, samsung_i2s_driver_ids);
 
 #ifdef CONFIG_OF
-static struct samsung_i2s_dai_data samsung_i2s_dai_data_array[] = {
-	[TYPE_PRI] = { TYPE_PRI },
-	[TYPE_SEC] = { TYPE_SEC },
-};
-
 static const struct of_device_id exynos_i2s_match[] = {
-	{ .compatible = "samsung,i2s-v5",
-	  .data = &samsung_i2s_dai_data_array[TYPE_PRI],
+	{
+		.compatible = "samsung,s3c6410-i2s",
+		.data = &i2sv3_dai_type,
+	}, {
+		.compatible = "samsung,s5pv210-i2s",
+		.data = &i2sv5_dai_type,
 	},
 	{},
 };
-- 
1.7.4.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux