this series
- fixes several drivers that are used in the MPC512x platform (UART,
SPI, ethernet, PCI, USB, CAN, NAND flash, video capture) in how they
handle clocks (appropriately acquire and setup them, hold references
during use, release clocks after use)
- introduces support for the common clock framework (CCF, COMMON_CLK
Kconfig option) in the PowerPC based MPC512x platform, which brings
device tree based clock lookup as well
although the series does touch several subsystems -- tty (serial), spi,
net (can, fs_enet), mtd (nfc), usb, i2c, media (viu), and dts -- all of
the patches are strictly clock related or trivial
it appears most appropriate to take this series through either the clk
or the powerpc trees after it has passed review and other subsystem
maintainers ACKed the clock setup related driver modifications
the series passes 'checkpatch.pl --strict' except for one warning which
cannot get resolved, since that either breaks compilation (the data type
is preset by the clk-provider.h API) or requires a cast which shadows
real mismatches:
WARNING: static const char * array should probably be static const char * const
#431: FILE: arch/powerpc/platforms/512x/clock-commonclk.c:334:
+static const char *parent_names_mux0[] = {
total: 0 errors, 1 warnings, 0 checks, 807 lines checked
each step in the series was build and run tested (with a display that is
attached to the DIU as well as SPI, with an SPI attached NOR flash, with
multiple UART ports such that one is not the boot console, with EEPROMs
attached to I2C, with an SD card, booting from network)
changes in v4:
- remove explicit devm_clk_put() calls as these will occur implicitly
upon device release (01/31, 02/31, 03/31, 04/31, 05/31, 06/31, 08/31,
09/31, 27/31)
- split the PSC (SPI, UART) and MSCAN (CAN) related MCLK subtrees into
separate 'ipg'/'bdlc' gated clock items for register access as well as
the 'mclk' clock subtrees that apply to bitrates -- this eliminates
the need for "shared gates" and further reduces clock pre-enable
workarounds (11/31, 15/31, 17/31, 18/31, 20/31, 21/31, 22/31, 27/31)
- further adjust the CAN clock driver, fix an incomplete error code path
in the network device open callback (11/31), only enable the bitrate
clock when the network device is open (27/31)
- remove debug output in the clock tree setup when introducing the
platform's clock driver, there already is CONFIG_COMMON_CLK_DEBUG to
retrieve more complete information (17/31)
- remove an "enums don't work here" comment in the dt-bindings header
file (15/31)
- reword and update commit messages (body and/or subject) where
appropriate (03/31, 04/31, 05/31, 06/31, 08/31, 09/31, 11/31, 12/31,
17/31, 20/31, 21/31, 22/31, 27/31, 28/31, 30/31, 31/31)
- add 'Reviewed-By' attributes which were received for v3
changes in v3:
- rebase the series against v3.11-rc2
- re-ordered the series to first address all general clock handling
concerns in existing drivers, before introducing common clock support
in the platform's clock driver
- slightly rework the SPI (01/31), UART (02/31), and PSC FIFO (23/31)
clock handling in comparison to v2 which introduced those fixes
(devm_{get,put}_clk() calls, fewer goto labels in error paths)
- fix and improve clock handling (balance allocation and release of
clocks, check for errors during setup) in all of the other drivers
which this series has touched before in naive ways: USB (03/31), NAND
flash (04/31), video capture (05/31), I2C (06/31), ethernet (08/31),
PCI (09/31), CAN (11/31)
- silence a build warning in the ethernet driver (07/31)
- eliminate all PPC_CLOCK references, use 'per' clock names for NAND
flash (25/31) and VIU (26/31) as well
- unbreak CAN operation for the period between introducing common clock
support in the platform's clock driver and introducing common clock
support in the CAN peripheral driver as well as providing clock specs
in the device tree (provide clkdev aliases for SYS and REF)
- improve common clock support for CAN (devm_{get,put}_clk() calls,
check enable() errors, keep a reference to used clocks, disable and
put clocks after use)
- reworded several commit messages to better reflect the kind of change
and because fixes were applied before adding common infrastructure
support
- point to individual numbered patches of the series in the list of
changes for v2 as well
changes in v2:
- cleanup of the UART (02/24) and SPI (01/24) clock handling before the
introduction of common clock support for the platform, as incomplete
clock handling becomes fatal or more dangerous later (which in turn
changes the context of the "device tree lookup only" followup patch
later)
- reordered the sequence of patches to keep the serial communication
related parts together (UART, SPI, and PSC FIFO changes after common
clock support was introduced, which have become 11-14/24 now)
- updated commit messages for the clock API use cleanup in the serial
communication drivers, updated comments and reworded commit messages
in the core clock driver to expand on the pre-enable workaround and
clkdev registration (09/24)
- keep a reference to the PSC FIFO clock during use instead of looking
up the clock again in the uninit() routine (14/24)
- remove the clkdev.h header file inclusion directive with the removal
of the clkdev registration call (13/24)
Gerhard Sittig (31):
spi: mpc512x: cleanup clock API use
serial: mpc512x: cleanup clock API use
USB: fsl-mph-dr-of: cleanup clock API use
mtd: mpc5121_nfc: cleanup clock API use
[media] fsl-viu: cleanup clock API use
i2c: mpc: cleanup clock API use
fs_enet: silence a build warning (unused variable)
fs_enet: cleanup clock API use
powerpc/fsl-pci: improve clock API use
net: can: mscan: add a comment on reg to idx mapping
net: can: mscan: improve clock API use
powerpc: mpc512x: array decl for MCLK registers in CCM
clk: wrap I/O access for improved portability
dts: mpc512x: prepare for preprocessor support
dts: mpc512x: introduce dt-bindings/clock/ header
dts: mpc512x: add clock related device tree specs
clk: mpc512x: introduce COMMON_CLK for MPC512x
dts: mpc512x: add clock specs for client lookups
clk: mpc512x: don't pre-enable FEC and I2C clocks
spi: mpc512x: switch to CCF names in clock lookup
serial: mpc512x: switch to CCF names in clock lookup
clk: mpc512x: remove PSC (UART, SPI) compat workarounds
serial: mpc512x: setup the PSC FIFO clock as well
USB: fsl-mph-dr-of: remove now obsolete clock lookup name
mtd: mpc5121_nfc: remove now obsolete clock lookup name
[media] fsl-viu: remove now obsolete clock lookup name
net: can: mscan: add common clock support for mpc512x
powerpc/mpc512x: improve DIU related clock setup
clk: mpc512x: switch to COMMON_CLK, remove PPC_CLOCK
net: can: mscan: remove non-CCF code for MPC512x
clk: mpc512x: remove remaining migration workarounds
arch/powerpc/boot/dts/ac14xx.dts | 9 +-
arch/powerpc/boot/dts/include/dt-bindings | 1 +
arch/powerpc/boot/dts/mpc5121.dtsi | 110 ++-
arch/powerpc/boot/dts/mpc5121ads.dts | 2 +-
arch/powerpc/boot/dts/pdm360ng.dts | 2 +-
arch/powerpc/include/asm/mpc5121.h | 18 +-
arch/powerpc/platforms/512x/Kconfig | 2 +-
arch/powerpc/platforms/512x/Makefile | 3 +-
arch/powerpc/platforms/512x/clock-commonclk.c | 716 +++++++++++++++++++
arch/powerpc/platforms/512x/clock.c | 753 --------------------
arch/powerpc/platforms/512x/mpc512x_shared.c | 165 +++--
arch/powerpc/sysdev/fsl_pci.c | 22 +
drivers/clk/clk-divider.c | 6 +-
drivers/clk/clk-gate.c | 6 +-
drivers/clk/clk-mux.c | 6 +-
drivers/i2c/busses/i2c-mpc.c | 24 +
drivers/media/platform/fsl-viu.c | 23 +-
drivers/mtd/nand/mpc5121_nfc.c | 21 +-
drivers/net/can/mscan/mpc5xxx_can.c | 281 +++++---
drivers/net/can/mscan/mscan.c | 27 +-
drivers/net/can/mscan/mscan.h | 3 +
.../net/ethernet/freescale/fs_enet/fs_enet-main.c | 21 +-
drivers/spi/spi-mpc512x-psc.c | 60 +-
drivers/tty/serial/mpc52xx_uart.c | 179 ++++-
drivers/usb/host/fsl-mph-dr-of.c | 27 +-
include/dt-bindings/clock/mpc512x-clock.h | 69 ++
include/linux/clk-provider.h | 33 +
include/linux/fs_enet_pd.h | 3 +
28 files changed, 1534 insertions(+), 1058 deletions(-)
create mode 120000 arch/powerpc/boot/dts/include/dt-bindings
create mode 100644 arch/powerpc/platforms/512x/clock-commonclk.c
delete mode 100644 arch/powerpc/platforms/512x/clock.c
create mode 100644 include/dt-bindings/clock/mpc512x-clock.h
# uname -srm
Linux 3.11.0-rc4-00031-gb38a1de ppc
# cat /sys/kernel/debug/clk/clk_summary
clock enable_cnt prepare_cnt rate
---------------------------------------------------------------------
ac97 0 0 24567000
spdif_rx_in 0 0 0
spdif_tx_in 0 0 0
psc_mclk_in 0 0 25000000
dummy 1 1 0
osc 1 1 25000000
ref 1 1 25000000
sys 6 6 320000000
spdif-mux0 0 0 320000000
spdif-en0 0 0 320000000
spdif_mclk_div 0 0 80000000
spdif_mclk 0 0 80000000
mscan3-mux0 0 0 320000000
mscan3-en0 0 0 320000000
mscan3_mclk_div 0 0 80000000
mscan3_mclk 0 0 80000000
mscan2-mux0 0 0 320000000
mscan2-en0 0 0 320000000
mscan2_mclk_div 0 0 80000000
mscan2_mclk 0 0 80000000
mscan1-mux0 0 0 320000000
mscan1-en0 0 0 320000000
mscan1_mclk_div 0 0 16000000
mscan1_mclk 0 0 16000000
mscan0-mux0 0 0 320000000
mscan0-en0 0 0 320000000
mscan0_mclk_div 0 0 16000000
mscan0_mclk 0 0 16000000
psc11-mux0 0 0 320000000
psc11-en0 0 0 320000000
psc11_mclk_div 0 0 80000000
psc11_mclk 0 0 80000000
psc10-mux0 0 0 320000000
psc10-en0 0 0 320000000
psc10_mclk_div 0 0 80000000
psc10_mclk 0 0 80000000
psc9-mux0 0 0 320000000
psc9-en0 0 0 320000000
psc9_mclk_div 0 0 80000000
psc9_mclk 0 0 80000000
psc8-mux0 0 0 320000000
psc8-en0 0 0 320000000
psc8_mclk_div 0 0 80000000
psc8_mclk 0 0 80000000
psc7-mux0 1 1 320000000
psc7-en0 1 1 320000000
psc7_mclk_div 1 1 80000000
psc7_mclk 1 1 80000000
psc6-mux0 0 0 320000000
psc6-en0 0 0 320000000
psc6_mclk_div 0 0 80000000
psc6_mclk 0 0 80000000
psc5-mux0 1 1 320000000
psc5-en0 1 1 320000000
psc5_mclk_div 1 1 80000000
psc5_mclk 1 1 80000000
psc4-mux0 1 1 320000000
psc4-en0 1 1 320000000
psc4_mclk_div 1 1 80000000
psc4_mclk 1 1 80000000
psc3-mux0 1 1 320000000
psc3-en0 1 1 320000000
psc3_mclk_div 1 1 80000000
psc3_mclk 2 2 80000000
psc2-mux0 0 0 320000000
psc2-en0 0 0 320000000
psc2_mclk_div 0 0 80000000
psc2_mclk 0 0 80000000
psc1-mux0 0 0 320000000
psc1-en0 0 0 320000000
psc1_mclk_div 0 0 80000000
psc1_mclk 0 0 80000000
psc0-mux0 0 0 320000000
psc0-en0 0 0 320000000
psc0_mclk_div 0 0 80000000
psc0_mclk 0 0 80000000
ddr-ug 1 1 160000000
ddr 1 1 160000000
csb 4 4 160000000
viu 0 0 160000000
iim 0 0 160000000
usb2 0 0 160000000
usb1 0 0 160000000
axe 0 0 160000000
pci-ug 0 0 26666666
pci 0 0 26666666
mbx-bus-ug 0 0 80000000
mbx-bus 0 0 80000000
mbx-ug 0 0 80000000
mbx 0 0 80000000
mbx-3d-ug 0 0 80000000
mbx-3d 0 0 80000000
e300 1 1 400000000
diu-x4 1 1 640000000
diu-ug 1 1 2509803
diu 2 2 2509803
sdhc-x4 1 1 640000000
sdhc-ug 1 1 53333333
sdhc-2 0 0 53333333
sdhc 1 1 53333333
ips 12 12 80000000
spdif 0 0 80000000
bdlc 2 2 80000000
i2c 3 3 80000000
mem 1 1 80000000
fec 1 1 80000000
sata 0 0 80000000
psc-fifo 1 1 80000000
psc11 0 0 80000000
psc10 0 0 80000000
psc9 0 0 80000000
psc8 0 0 80000000
psc7 1 1 80000000
psc6 0 0 80000000
psc5 1 1 80000000
psc4 1 1 80000000
psc3 1 1 80000000
psc2 0 0 80000000
psc1 0 0 80000000
psc0 0 0 80000000
pata 0 0 80000000
lpc-ug 1 1 40000000
lpc 1 1 40000000
nfc-ug 0 0 40000000
nfc 0 0 40000000
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
