Re: [RFC 1/2] usb: phy: Add Qualcomm SS-USB and HS-USB drivers for DWC3 core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On Tue, 2013-08-06 at 15:03 +0100, Mark Rutland wrote:
> On Tue, Aug 06, 2013 at 12:53:10PM +0100, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
> >
> > Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/usb/msm-ssusb.txt          |   49 +++
> >  drivers/usb/phy/Kconfig                            |   11 +
> >  drivers/usb/phy/Makefile                           |    2 +
> >  drivers/usb/phy/phy-msm-dwc3-usb2.c                |  342 +++++++++++++++++
> >  drivers/usb/phy/phy-msm-dwc3-usb3.c                |  389 ++++++++++++++++++++
> >  5 files changed, 793 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/usb/msm-ssusb.txt
> >  create mode 100644 drivers/usb/phy/phy-msm-dwc3-usb2.c
> >  create mode 100644 drivers/usb/phy/phy-msm-dwc3-usb3.c
> >
> > diff --git a/Documentation/devicetree/bindings/usb/msm-ssusb.txt b/Documentation/devicetree/bindings/usb/msm-ssusb.txt
> > new file mode 100644
> > index 0000000..550b496
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/msm-ssusb.txt
> > @@ -0,0 +1,49 @@
> > +MSM SuperSpeed USB3.0 SoC controllers
> > +
> > +Required properities :
> > +- compatible sould be "qcom,dwc3-usb2";
> > +- reg : offset and length of the register set in the memory map
> > +- clocks: <&cxo>, <&usb2a_phy_sleep_cxc>;
> 
> Huh? That doesn't describe what these are. These would be better
> explained with a reference to clock-names and a basic description as to
> what the input's called, what it drives, etc, as you've done done for
> the *-supply properties.

Ok, I will fix this.

> 
> > +- clock-names: "xo", "sleep_a_clk";
> > +<supply-name>-supply: phandle to the regulator device tree node
> > +Required "supply-name" examples are:
> > +       "v1p8" : 1.8v supply for HSPHY
> > +       "v3p3" : 3.3v supply for HSPHY
> > +       "vbus" : vbus supply for host mode
> > +       "vddcx" : vdd supply for HS-PHY digital circuit operation
> > +
> > +Required properities :
> > +- compatible sould be "qcom,dwc3-usb3";
> > +- reg : offset and length of the register set in the memory map
> > +- clocks: <&cxo>, <&usb30_mock_utmi_cxc>;
> 
> Similarly, this doesn't describe what the clocks are.

Understood.

> 
> > +- clock-names: "xo", "ref_clk";
> > +<supply-name>-supply: phandle to the regulator device tree node
> > +Required "supply-name" examples are:
> > +       "v1p8" : 1.8v supply for SS-PHY
> > +       "vddcx" : vdd supply for SS-PHY digital circuit operation
> > +
> > +Example device nodes:
> > +
> > +       dwc3_usb2: phy@f92f8800 {
> > +               compatible = "qcom,dwc3-usb2";
> > +               reg = <0xf92f8800 0x30>;
> > +
> > +               clocks = <&cxo>, <&usb2a_phy_sleep_cxc>;
> > +               clock-names = "xo", "sleep_a_clk";
> > +
> > +               vbus-supply = <&supply>;
> > +               vddcx-supply = <&supply>;
> > +               v1p8-supply = <&supply>;
> > +               v3p3-supply = <&supply>;
> > +       };
> > +
> > +       dwc3_usb3: phy@f92f8830 {
> > +               compatible = "qcom,dwc3-usb3";
> > +               reg = <0xf92f8830 0x30>;
> > +
> > +               clocks = <&cxo>, <&usb30_mock_utmi_cxc>;
> > +               clock-names = "xo", "ref_clk";
> > +
> > +               vddcx-supply = <&supply>;
> > +               v1p8-supply = <&supply>;
> > +       };
> 
> 
> Those regster banks look suspiciously close. Are these the same IP
> block? Can they ever appear separately?
> 

They are part of the wrapper Qualcomm logic around Synopsys USB3 core.
In this sense they are part of the one IP, I believe. Manage them from
separate drivers simplify code.

> Do the drivers not trample each other when messing with shared clocks
> and regulators?
> 

Regulators and clocks have reference counting, right?, so this should
be safe. Even if they are part of the one driver, clocks and regulators
could be switched off only if both PHY's do not use them.

Thanks, 
Ivan


> Thanks,
> Mark.


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux