On Tue, 2013-08-06 at 12:53 +0100, Ivan T. Ivanov wrote:
> From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
>
> Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
The same comment as for the RFC 1/2 here...
> .../devicetree/bindings/usb/msm-ssusb.txt | 39 +++++
> drivers/usb/dwc3/Kconfig | 8 +
> drivers/usb/dwc3/Makefile | 1 +
> drivers/usb/dwc3/dwc3-msm.c | 175 ++++++++++++++++++++
> 4 files changed, 223 insertions(+)
> create mode 100644 drivers/usb/dwc3/dwc3-msm.c
>
> diff --git a/Documentation/devicetree/bindings/usb/msm-ssusb.txt b/Documentation/devicetree/bindings/usb/msm-ssusb.txt
> index 550b496..313ae0d 100644
> --- a/Documentation/devicetree/bindings/usb/msm-ssusb.txt
> +++ b/Documentation/devicetree/bindings/usb/msm-ssusb.txt
> @@ -22,6 +22,23 @@ Required "supply-name" examples are:
> "v1p8" : 1.8v supply for SS-PHY
> "vddcx" : vdd supply for SS-PHY digital circuit operation
>
> +Required properties :
> +- compatible : should be "qcom,dwc-usb3-msm"
> +- reg : offset and length of the register set in the memory map
> + offset and length of the TCSR register for routing USB
> + signals to either picoPHY0 or picoPHY1.
> +- clocks = <&usb30_master_cxc>, <&sys_noc_usb3_axi_cxc>, <&usb30_sleep_cxc>, <&usb30_mock_utmi_cxc>;
> +- clock-names = "core_clk", "iface_clk", "sleep_clk", "utmi_clk";
> +
> +Optional properties :
> +- gdsc-supply : phandle to the globally distributed switch controller
> + regulator node to the USB controller.
> +
> +Sub nodes:
> +- Sub node for "DWC3- USB3 controller".
> + This sub node is required property for device node. The properties of this subnode
> + are specified in dwc3.txt.
Ah, this answers one of my questions - DWC3 comes from Synopsys.
> Example device nodes:
>
> dwc3_usb2: phy@f92f8800 {
> @@ -47,3 +64,25 @@ Example device nodes:
> vddcx-supply = <&supply>;
> v1p8-supply = <&supply>;
> };
> +
> + usb@fd4ab000 {
> + compatible = "qcom,dwc-usb3-msm";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0xfd4ab000 0x4>;
> +
> + clocks = <&usb30_master_cxc>, <&sys_noc_usb3_axi_cxc>, <&usb30_sleep_cxc>, <&usb30_mock_utmi_cxc>;
> + clock-names = "core_clk", "iface_clk", "sleep_clk", "utmi_clk";
> +
> + gdsc-supply = <&supply>;
> + ranges;
> +
> + dwc3@f9200000 {
> + compatible = "snps,dwc3";
Note that the Documentation/devicetree/bindings/usb/dwc3.txt is
mentioning "synopsys,dwc3" (which is clearly in opposition to the
vendor-prefixes.txt file) and this compatible value is used in the
drivers/usb/dwc3/core.c and omap5.dtsi. Unless it has been already fixed
recently, could you take care of that?
> + reg = <0xf9200000 0xcd00>;
> + interrupts = <0 131 0>;
> + interrupt-names = "irq";
> + usb-phy = <&dwc3_usb2>, <&dwc3_usb3>;
> + tx-fifo-resize;
> + };
> + };
And now I'm really confused... Maybe it's just lack of documentation...
How does the "qcom,dwc-usb3-msm" relate to "qcom,dwc-usb3"?
Paweł
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
