Re: [PATCH 3/7] usb: phy: omap-usb3: Don't use omap_get_control_dev()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thursday 01 August 2013 07:35 PM, Roger Quadros wrote:
omap_get_control_dev() is being deprecated as it doesn't support
multiple instances. As control device is present only from OMAP4
onwards which supports DT only, we use phandles to get the
reference to the control device.

As we don't support non-DT boot, we just bail out on probe
if device node is not present.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>

Tested-by: Kishon Vijay Abraham I <kishon@xxxxxx>


---
  drivers/usb/phy/phy-omap-usb3.c |   20 +++++++++++++++++---
  1 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index 4a7f27c..bad032e 100644
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
@@ -26,6 +26,7 @@
  #include <linux/pm_runtime.h>
  #include <linux/delay.h>
  #include <linux/usb/omap_control_usb.h>
+#include <linux/of_platform.h>

  #define	PLL_STATUS		0x00000004
  #define	PLL_GO			0x00000008
@@ -198,6 +199,12 @@ static int omap_usb3_probe(struct platform_device *pdev)
  {
  	struct omap_usb			*phy;
  	struct resource			*res;
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *control_node;
+	struct platform_device *control_pdev;
+
+	if (!node)
+		return -ENODEV;

  	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
  	if (!phy) {
@@ -239,11 +246,18 @@ static int omap_usb3_probe(struct platform_device *pdev)
  		return -EINVAL;
  	}

-	phy->control_dev = omap_get_control_dev();
-	if (IS_ERR(phy->control_dev)) {
-		dev_dbg(&pdev->dev, "Failed to get control device\n");
+	control_node = of_parse_phandle(node, "ctrl-module", 0);
+	if (!control_node) {
+		dev_err(&pdev->dev, "Failed to get control device phandle\n");
  		return -ENODEV;
  	}
+	control_pdev = of_find_device_by_node(control_node);
+	if (!control_pdev) {
+		dev_err(&pdev->dev, "Failed to get control device\n");
+		return -ENODEV;
+	}
+
+	phy->control_dev = &control_pdev->dev;

  	omap_control_usb_phy_power(phy->control_dev, 0);
  	usb_add_phy_dev(&phy->phy);


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux