Hello, This patch series are an attempt to cleanup the reserved memory device tree bindings for MFC device. MFC device has two memory ports (AXI masters), which are used to do DMA. Usually separate memory regions are being defined for each of those memory ports to improve performance. Some versions of MFC block have also significant limitation on the possible address range available for each of those memory ports/banks. In the board file era, there have been two additional platform devices defined for each of memory ports (named "s5p-mfc-l" and "s5p-mfc-r") to let the driver distinguish memory allocations done for each of them. Each of those platform devices might have special DMA ops assigned to fulfil specific memory requirements for a given memory port. Later, when device tree binding was added for MFC device, those memory ports were designed as two additional properties: "samsung,mfc-l" and "samsung,mfc-r" for codec node. This approach however has some significant limitation, so I propose to redesign it before the binding become considered as stable. The first problem with the proposed bindings is the fact that "samsung,mfc-r"/"samsung,mfc-l" properties are tied only to "base address + size" attributes of reserved memory and do not allow to assign any other attributes to those memory ports. This limits using those memory ports only to simple reserved memory. The second issue with those attributes is the fact that they are very specific to the MFC device, while reserved memory region is something more generic, which can be used for other devices as well. For example even on Exynos4 platform, similar reserved memory handling will be needed for the FIMC ISP device. For handling reserved memory regions and having a method to assign them to particular device I have posted the patches [1], which add device tree support to Contiguous Memory Allocator and simple reserved memory allocator based on dma_declare_coherent() function. This patch series is my proposal for replacing those custom bindings with generic approach, proposed in [1]. To get it working we need separate device node for each memory port, what has been achieved by adding "simple-bus" compatibility entry to the main MFC device node and adding two child nodes, which represent each memory port. Those child nodes have compatible property set to "samsung,memport". With such a structure "dma-memory-region" property with a phandle to respective reserved region can be easily added to the child nodes of MFC device. The advantage of such approach is the fact that those child nodes can be also used for adding properties for IOMMU (SYSMMU) controllers. This way also bindings for SYSMMU and the code, which handles it can be simplified, because respective device tree part better matches physical hardware design. Best regards Marek Szyprowski Samsung R&D Institute Poland [1] http://thread.gmane.org/gmane.linux.ports.arm.kernel/257615/ Patch summary: Marek Szyprowski (2): ARM: Exynos: replace custom MFC reserved memory handling with generic code media: s5p-mfc: remove DT hacks and simplify initialization code .../devicetree/bindings/media/s5p-mfc.txt | 63 +++++++++++++--- arch/arm/boot/dts/exynos4.dtsi | 10 ++- arch/arm/boot/dts/exynos4210-origen.dts | 25 ++++++- arch/arm/boot/dts/exynos4210-smdkv310.dts | 25 ++++++- arch/arm/boot/dts/exynos4412-origen.dts | 25 ++++++- arch/arm/boot/dts/exynos4412-smdk4412.dts | 25 ++++++- arch/arm/boot/dts/exynos5250-arndale.dts | 26 ++++++- arch/arm/boot/dts/exynos5250-smdk5250.dts | 26 ++++++- arch/arm/boot/dts/exynos5250.dtsi | 10 ++- arch/arm/mach-exynos/mach-exynos4-dt.c | 16 ----- arch/arm/mach-exynos/mach-exynos5-dt.c | 17 ----- arch/arm/plat-samsung/include/plat/mfc.h | 11 --- arch/arm/plat-samsung/s5p-dev-mfc.c | 32 --------- drivers/media/platform/s5p-mfc/s5p_mfc.c | 75 ++++---------------- 14 files changed, 227 insertions(+), 159 deletions(-) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
