Re: [PATCH 00/21] mm: introduce Designated Movable Blocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 9/19/2022 2:00 AM, David Hildenbrand wrote:
Hi Dough,

I have some high-level questions.
Thanks for your interest. I will attempt to answer them.


MOTIVATION:
Some Broadcom devices (e.g. 7445, 7278) contain multiple memory
controllers with each mapped in a different address range within
a Uniform Memory Architecture. Some users of these systems have

How large are these areas typically?

How large are they in comparison to other memory in the system?

How is this memory currently presented to the system?
I'm not certain what is typical because these systems are highly configurable and Broadcom's customers have different ideas about application processing.

The 7278 device has four ARMv8 CPU cores in an SMP cluster and two memory controllers (MEMCs). Each MEMC is capable of controlling up to 8GB of DRAM. An example 7278 system might have 1GB on each controller, so an arm64 kernel might see 1GB on MEMC0 at 0x40000000-0x7FFFFFFF and 1GB on MEMC1 at 0x300000000-0x33FFFFFFF.

The Designated Movable Block concept introduced here has the potential to offer useful services to different constituencies. I tried to highlight this in my V1 patch set with the hope of attracting some interest, but it can complicate the overall discussion, so I would like to maybe narrow the discussion here. It may be good to keep them in mind when assessing the overall value, but perhaps the "other opportunities" can be covered as a follow on discussion.

The base capability described in commits 7-15 of this V1 patch set is to allow a 'movablecore' block to be created at a particular base address rather than solely at the end of addressable memory.


expressed the desire to locate ZONE_MOVABLE memory on each
memory controller to allow user space intensive processing to
make better use of the additional memory bandwidth.

Can you share some more how exactly ZONE_MOVABLE would help here to make better use of the memory bandwidth?
ZONE_MOVABLE memory is effectively unusable by the kernel. It can be used by user space applications through both the page allocator and the Hugetlbfs. If a large 'movablecore' allocation is defined and it can only be located at the end of addressable memory then it will always be located on MEMC1 of a 7278 system. This will create a tendency for user space accesses to consume more bandwidth on the MEMC1 memory controller and kernel space accesses to consume more bandwidth on MEMC0. A more even distribution of ZONE_MOVABLE memory between the available memory controllers in theory makes more memory bandwidth available to user space intensive loads.


Unfortunately, the historical monotonic layout of zones would
mean that if the lowest addressed memory controller contains
ZONE_MOVABLE memory then all of the memory available from
memory controllers at higher addresses must also be in the
ZONE_MOVABLE zone. This would force all kernel memory accesses
onto the lowest addressed memory controller and significantly
reduce the amount of memory available for non-movable
allocations.

We do have code that relies on zones during boot to not overlap within a single node.
I believe my changes address all such reliance, but if you are aware of something I missed please let me know.



The main objective of this patch set is therefore to allow a
block of memory to be designated as part of the ZONE_MOVABLE
zone where it will always only be used by the kernel page
allocator to satisfy requests for movable pages. The term
Designated Movable Block is introduced here to represent such a
block. The favored implementation allows modification of the

Sorry to say, but that term is rather suboptimal to describe what you are doing here. You simply have some system RAM you'd want to have managed by ZONE_MOVABLE, no?
That may be true, but I found it superior to the 'sticky' movable terminology put forth by Mel Gorman ;). I'm happy to entertain alternatives, but they may not be as easy to find as you think.


'movablecore' kernel parameter to allow specification of a base
address and support for multiple blocks. The existing
'movablecore' mechanisms are retained. Other mechanisms based on
device tree are also included in this set.

BACKGROUND:
NUMA architectures support distributing movablecore memory
across each node, but it is undesirable to introduce the
overhead and complexities of NUMA on systems that don't have a
Non-Uniform Memory Architecture.

How exactly would that look like? I think I am missing something :)
The notion would be to consider each memory controller as a separate node, but as stated it is not desirable.



Commit 342332e6a925 ("mm/page_alloc.c: introduce kernelcore=mirror option")
also depends on zone overlap to support sytems with multiple
mirrored ranges.

IIRC, zones will not overlap within a single node.
I believe the implementation for kernelcore=mirror allows for the possibility of multiple non-adjacent mirrored ranges in a single node and accommodates the zone overlap.



Commit c6f03e2903c9 ("mm, memory_hotplug: remove zone restrictions")
embraced overlapped zones for memory hotplug.

Yes, after boot.


This commit set follows their lead to allow the ZONE_MOVABLE
zone to overlap other zones while spanning the pages from the
lowest Designated Movable Block to the end of the node.
Designated Movable Blocks are made absent from overlapping zones
and present within the ZONE_MOVABLE zone.

I initially investigated an implementation using a Designated
Movable migrate type in line with comments[1] made by Mel Gorman
regarding a "sticky" MIGRATE_MOVABLE type to avoid using
ZONE_MOVABLE. However, this approach was riskier since it was
much more instrusive on the allocation paths. Ultimately, the
progress made by the memory hotplug folks to expand the
ZONE_MOVABLE functionality convinced me to follow this approach.

OPPORTUNITIES:
There have been many attempts to modify the behavior of the
kernel page allocators use of CMA regions. This implementation
of Designated Movable Blocks creates an opportunity to repurpose
the CMA allocator to operate on ZONE_MOVABLE memory that the
kernel page allocator can use more agressively, without
affecting the existing CMA implementation. It is hoped that the
"shared-dmb-pool" approach included here will be useful in cases
where memory sharing is more important than allocation latency.

CMA introduced a paradigm where multiple allocators could
operate on the same region of memory, and that paradigm can be
extended to Designated Movable Blocks as well. I was interested
in using kernel resource management as a mechanism for exposing
Designated Movable Block resources (e.g. /proc/iomem) that would
be used by the kernel page allocator like any other ZONE_MOVABLE
memory, but could be claimed by an alternative allocator (e.g.
CMA). Unfortunately, this becomes complicated because the kernel
resource implementation varies materially across different
architectures and I do not require this capability so I have
deferred that.

Why can't we simply designate these regions as CMA regions?
We and others have encountered significant performance issues when large CMA regions are used. There are significant restrictions on the page allocator's use of MIGRATE_CMA pages and the memory subsystem works very hard to keep about half of the memory in the CMA region free. There have been attempts to patch the CMA implementation to alter this behavior (for example the set I referenced Mel's response to in [1]), but there are users that desire the current behavior.


Why do we have to start using ZONE_MOVABLE for them?
One of the "other opportunities" for Designated Movable Blocks is to allow CMA to allocate from a DMB as an alternative. This would allow current users to continue using CMA as they want, but would allow users (e.g. hugetlb_cma) that are not sensitive to the allocation latency to let the kernel page allocator make more complete use (i.e. waste less) of the shared memory. ZONE_MOVABLE pageblocks are always MIGRATE_MOVABLE so the restrictions placed on MIGRATE_CMA pageblocks are lifted within a DMB.


Thanks for your consideration,
Dough Baker ... I mean Doug Berger :).



[Index of Archives]     [Device Tree]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux Audio Users]     [Photos]     [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]

  Powered by Linux