Hi, Acked-by: Alain Volmat <alain.volmat@xxxxxxxxxxx> Thanks. Alain On Wed, Apr 27, 2022 at 12:59:56PM -0500, Rob Herring wrote: > Add remaining properties and descriptions from i2c.txt binding in Linux > kernel tree. The Cc list are the authors of i2c.txt. > > Cc: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> > Cc: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> > Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> > Cc: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx> > Cc: Jon Hunter <jonathanh@xxxxxxxxxx> > Cc: Alain Volmat <alain.volmat@xxxxxxxxxxx> > Cc: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx> > Signed-off-by: Rob Herring <robh@xxxxxxxxxx> > --- > Cc list, > > I need your or your company's permission to relicense i2c.txt contents > (used in 'description') to BSD-2-Clause. Please ack and provide a > copyright if desired. > > dtschema/schemas/i2c/i2c-controller.yaml | 143 +++++++++++++++++++++++ > 1 file changed, 143 insertions(+) > > diff --git a/dtschema/schemas/i2c/i2c-controller.yaml b/dtschema/schemas/i2c/i2c-controller.yaml > index 91eac62a6bc8..c2e803ebcc3f 100644 > --- a/dtschema/schemas/i2c/i2c-controller.yaml > +++ b/dtschema/schemas/i2c/i2c-controller.yaml > @@ -1,5 +1,6 @@ > # SPDX-License-Identifier: BSD-2-Clause > # Copyright 2018 Linaro Ltd. > +# Copyright 2022 Arm Ltd. > %YAML 1.2 > --- > $id: http://devicetree.org/schemas/i2c/i2c-controller.yaml# > @@ -28,6 +29,91 @@ properties: > minimum: 1000 > maximum: 3000000 > > + i2c-scl-falling-time-ns: > + description: > + Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C > + specification. > + > + i2c-scl-internal-delay-ns: > + description: > + Number of nanoseconds the IP core additionally needs to setup SCL. > + > + i2c-scl-rising-time-ns: > + description: > + Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C > + specification. > + > + i2c-sda-falling-time-ns: > + description: > + Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C > + specification. > + > + i2c-analog-filter: > + type: boolean > + description: > + Enable analog filter for i2c lines. > + > + i2c-digital-filter: > + type: boolean > + description: > + Enable digital filter for i2c lines. > + > + i2c-digital-filter-width-ns: > + description: > + Width of spikes which can be filtered by digital filter > + (i2c-digital-filter). This width is specified in nanoseconds. > + > + i2c-analog-filter-cutoff-frequency: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Frequency that the analog filter (i2c-analog-filter) uses to distinguish > + which signal to filter. Signal with higher frequency than specified will > + be filtered out. Only lower frequency will pass (this is applicable to a > + low-pass analog filter). Typical value should be above the normal i2c bus > + clock frequency (clock-frequency). Specified in Hz. > + > + mctp-controller: > + type: boolean > + description: > + Indicates that the system is accessible via this bus as an endpoint for > + MCTP over I2C transport. > + > + multi-master: > + type: boolean > + description: > + States that there is another master active on this bus. The OS can use > + this information to adapt power management to keep the arbitration awake > + all the time, for example. Can not be combined with 'single-master'. > + > + scl-gpios: > + maxItems: 1 > + description: > + Specifies the GPIO related to SCL pin. Used for GPIO bus recovery. > + > + sda-gpios: > + maxItems: 1 > + description: > + Specifies the GPIO related to SDA pin. Optional for GPIO bus recovery. > + > + single-master: > + type: boolean > + description: > + States that there is no other master active on this bus. The OS can use > + this information to detect a stalled bus more reliably, for example. Can > + not be combined with 'multi-master'. > + > + smbus: > + type: boolean > + description: > + States that additional SMBus restrictions and features apply to this bus. > + An example of feature is SMBusHostNotify. Examples of restrictions are > + more reserved addresses and timeout definitions. > + > + smbus-alert: > + type: boolean > + description: > + states that the optional SMBus-Alert feature apply to this bus. > + > no-detect: > type: boolean > description: > @@ -38,4 +124,61 @@ patternProperties: > '@[0-9a-f]+$': > type: object > > + properties: > + reg: > + items: > + items: > + - oneOf: > + - maximum: 0x7f > + - minimum: 0x40000000 > + maximum: 0x4000007f > + - minimum: 0x80000000 > + maximum: 0x800003ff > + - minimum: 0xc0000000 > + maximum: 0xc00003ff > + description: | > + One or many I2C slave addresses. These are usually a 7 bit addresses. > + However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is > + used to mark a 10 bit address. It is needed to avoid the ambiguity > + between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050 > + which, in theory, can be on the same bus. > + Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we > + listen to be devices ourselves. > + > + host-notify: > + description: > + Device uses SMBus host notify protocol instead of interrupt line. > + Requires being connected to an adapter that supports this feature. > + > + interrupts: > + description: > + I2C core will treat "irq" interrupt (or the very first interrupt if > + not using interrupt names) as primary interrupt for the slave. > + > + interrupt-names: > + anyOf: > + - {} # Any name is allowed. > + - items: > + enum: > + - irq > + - wakeup > + - smbus_alert > + description: > + Names which are recognized by I2C core, other names are left to > + individual bindings. > + > + wakeup-source: > + description: > + Device can be used as a wakeup source. The device should also have > + "wakeup" interrupt for the device. If "wakeup" interrupt name is not > + present in the binding, then primary interrupt will be used as wakeup > + interrupt. > + > + required: > + - reg > + > +dependentRequired: > + i2c-analog-filter-cutoff-frequency: [ i2c-analog-filter ] > + i2c-digital-filter-width-ns: [ i2c-digital-filter ] > + > additionalProperties: true > -- > 2.34.1 >
