Drops a ton of lines from the Makefile and makes it easier to track upstream Sphinx changes. This change is in line with Sphinx 1.8 Signed-off-by: Grant Likely <grant.likely@xxxxxxx> --- Makefile | 232 +++---------------------------------------------------- 1 file changed, 11 insertions(+), 221 deletions(-) diff --git a/Makefile b/Makefile index 3b5d3cd..e1430fa 100644 --- a/Makefile +++ b/Makefile @@ -1,152 +1,21 @@ -# Makefile for Sphinx documentation +# Minimal makefile for Sphinx documentation # # You can set these variables from the command line. SPHINXOPTS = SPHINXBUILD = sphinx-build -PAPER = +SOURCEDIR = source BUILDDIR = build LATEXDIFF = latexdiff -# User-friendly check for sphinx-build -ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1) - $(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don\'t have Sphinx installed, grab it from http://sphinx-doc.org/) -endif - -# Internal variables. -PAPEROPT_a4 = -D latex_paper_size=a4 -PAPEROPT_letter = -D latex_paper_size=letter -ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source -# the i18n builder cannot share the environment and doctrees with the others -I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source - -.PHONY: help +# Put it first so that "make" without argument is like "make help". help: - @echo "Please use \`make <target>' where <target> is one of" - @echo " html to make standalone HTML files" - @echo " dirhtml to make HTML files named index.html in directories" - @echo " singlehtml to make a single large HTML file" - @echo " pickle to make pickle files" - @echo " json to make JSON files" - @echo " htmlhelp to make HTML files and a HTML help project" - @echo " qthelp to make HTML files and a qthelp project" - @echo " applehelp to make an Apple Help Book" - @echo " devhelp to make HTML files and a Devhelp project" - @echo " epub to make an epub" - @echo " epub3 to make an epub3" - @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter" - @echo " latexdiff to make LaTeX files including changebars against previous release" - @echo " latexpdf to make LaTeX files and run them through pdflatex" - @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx" - @echo " text to make text files" - @echo " man to make manual pages" - @echo " texinfo to make Texinfo files" - @echo " info to make Texinfo files and run them through makeinfo" - @echo " gettext to make PO message catalogs" - @echo " changes to make an overview of all changed/added/deprecated items" - @echo " xml to make Docutils-native XML files" - @echo " pseudoxml to make pseudoxml-XML files for display purposes" - @echo " linkcheck to check all external links for integrity" - @echo " doctest to run all doctests embedded in the documentation (if enabled)" - @echo " coverage to run coverage check of the documentation (if enabled)" - -.PHONY: clean -clean: - rm -rf $(BUILDDIR)/* - -.PHONY: check -check: - codespell source/*.rst + @$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O) + @echo " latexdiff to make LaTeX files including changebars against previous release" -.PHONY: html -html: - $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html - @echo - @echo "Build finished. The HTML pages are in $(BUILDDIR)/html." - -.PHONY: dirhtml -dirhtml: - $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml - @echo - @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml." - -.PHONY: singlehtml -singlehtml: - $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml - @echo - @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml." - -.PHONY: pickle -pickle: - $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle - @echo - @echo "Build finished; now you can process the pickle files." - -.PHONY: json -json: - $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json - @echo - @echo "Build finished; now you can process the JSON files." - -.PHONY: htmlhelp -htmlhelp: - $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp - @echo - @echo "Build finished; now you can run HTML Help Workshop with the" \ - ".hhp project file in $(BUILDDIR)/htmlhelp." - -.PHONY: qthelp -qthelp: - $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp - @echo - @echo "Build finished; now you can run "qcollectiongenerator" with the" \ - ".qhcp project file in $(BUILDDIR)/qthelp, like this:" - @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/DevicetreeSpecification.qhcp" - @echo "To view the help file:" - @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/DevicetreeSpecification.qhc" - -.PHONY: applehelp -applehelp: - $(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp - @echo - @echo "Build finished. The help book is in $(BUILDDIR)/applehelp." - @echo "N.B. You won't be able to view it unless you put it in" \ - "~/Library/Documentation/Help or install it in your application" \ - "bundle." - -.PHONY: devhelp -devhelp: - $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp - @echo - @echo "Build finished." - @echo "To view the help file:" - @echo "# mkdir -p $$HOME/.local/share/devhelp/DevicetreeSpecification" - @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/DevicetreeSpecification" - @echo "# devhelp" - -.PHONY: epub -epub: - $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub - @echo - @echo "Build finished. The epub file is in $(BUILDDIR)/epub." - -.PHONY: epub3 -epub3: - $(SPHINXBUILD) -b epub3 $(ALLSPHINXOPTS) $(BUILDDIR)/epub3 - @echo - @echo "Build finished. The epub3 file is in $(BUILDDIR)/epub3." +.PHONY: help latexdiff Makefile -.PHONY: latex -latex: - $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex - @echo - @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex." - @echo "Run \`make' in that directory to run these through (pdf)latex" \ - "(use \`make latexpdf' here to do that automatically)." - -.PHONY: latexdiff -latexdiff: - $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex +latexdiff: latex @echo "Generating LaTeX changebars..." $(LATEXDIFF) --type=UNDERLINE --config VERBATIMENV=sphinxVerbatim $(BUILDDIR)/latex-previous/devicetree-specification.tex $(BUILDDIR)/latex/devicetree-specification.tex > $(BUILDDIR)/latex/devicetree-specification-changebars.tex @echo "Running LaTeX files through pdflatex..." @@ -154,86 +23,7 @@ latexdiff: @echo @echo "latexdiff finished; the PDF files are in $(BUILDDIR)/latex." -.PHONY: latexpdf -latexpdf: - $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex - @echo "Running LaTeX files through pdflatex..." - $(MAKE) -C $(BUILDDIR)/latex all-pdf - @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." - -.PHONY: latexpdfja -latexpdfja: - $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex - @echo "Running LaTeX files through platex and dvipdfmx..." - $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja - @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex." - -.PHONY: text -text: - $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text - @echo - @echo "Build finished. The text files are in $(BUILDDIR)/text." - -.PHONY: man -man: - $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man - @echo - @echo "Build finished. The manual pages are in $(BUILDDIR)/man." - -.PHONY: texinfo -texinfo: - $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo - @echo - @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo." - @echo "Run \`make' in that directory to run these through makeinfo" \ - "(use \`make info' here to do that automatically)." - -.PHONY: info -info: - $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo - @echo "Running Texinfo files through makeinfo..." - make -C $(BUILDDIR)/texinfo info - @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo." - -.PHONY: gettext -gettext: - $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale - @echo - @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale." - -.PHONY: changes -changes: - $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes - @echo - @echo "The overview file is in $(BUILDDIR)/changes." - -.PHONY: linkcheck -linkcheck: - $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck - @echo - @echo "Link check complete; look for any errors in the above output " \ - "or in $(BUILDDIR)/linkcheck/output.txt." - -.PHONY: doctest -doctest: - $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest - @echo "Testing of doctests in the sources finished, look at the " \ - "results in $(BUILDDIR)/doctest/output.txt." - -.PHONY: coverage -coverage: - $(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage - @echo "Testing of coverage in the sources finished, look at the " \ - "results in $(BUILDDIR)/coverage/python.txt." - -.PHONY: xml -xml: - $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml - @echo - @echo "Build finished. The XML files are in $(BUILDDIR)/xml." - -.PHONY: pseudoxml -pseudoxml: - $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml - @echo - @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml." +# Catch-all target: route all unknown targets to Sphinx using the new +# "make mode" option. $(O) is meant as a shortcut for $(SPHINXOPTS). +%: Makefile + @$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O) -- 2.20.1
