On Mon, Sep 21, 2015 at 10:59 PM, Matt Porter <mporter@xxxxxxxxxxxx> wrote: > Documentation explaining the syntax and format of the YAML-based DT binding > documentation. > > Signed-off-by: Matt Porter <mporter@xxxxxxxxxxxx> > --- > .../devicetree/bindings/dt-binding-format.txt | 105 +++++++++++++++++++++ > 1 file changed, 105 insertions(+) > create mode 100644 Documentation/devicetree/bindings/dt-binding-format.txt > > diff --git a/Documentation/devicetree/bindings/dt-binding-format.txt b/Documentation/devicetree/bindings/dt-binding-format.txt > new file mode 100644 > index 0000000..3763487 > --- /dev/null > +++ b/Documentation/devicetree/bindings/dt-binding-format.txt > @@ -0,0 +1,105 @@ > +-------------------------- > +Device Tree Binding Format > +-------------------------- > + > +Background > +---------- > + > +DT bindings historically were written as text in prose format which > +led to issues in usability of that source documentation. Some of > +these issues include the need to programmatically process binding > +source documentation to do DTS validation, perform mass updates to > +format/style, and to generate publishable documentation in HTML or > +PDF form. > + > +Overview > +-------- > + > +The DT binding format is based on the YAML text markup language. > +Although there are many text markup options available, YAML > +fulfills all requirements considered for a DT binding source format > +which include: > + > +1) Must be human readable > +2) Must be easily translated to other data formats (XML, JSON, etc). > +3) Must have sufficient tools and libraries to enable developers to > + build new tools for DT binding processing > +4) Must have a complete spec to refer to syntax > + > +YAML is documentated in the specification found at > +http://www.yaml.org/spec/1.2/spec.html > + > +The required YAML DT binding tag format and syntax are defined in > +the following sections. > + > +YAML DT Binding Syntax > +---------------------- > + > +* Lines starting with "#" are comments and not part of the binding itself > +* "%YAML 1.2" starts a file, indicating the version of YAML in use > +* "---" starts a binding document > +* "..." ends a binding document > +* Multiple binding documents may exist in a single file > +* Tabs are not permitted > +* Scope is denoted by indentation of four spaces > +* Key value pairs are denoted by "key: value" > +* Sequences are denoted by "-" I'm going to pick on sequences... > +* Scalar values may convert newlines to spaces and preserve blank > + lines for long description formatting using ">" > +* Scalar values may escape all reserved characters and preserve > + newlines by using "|" to denote literal style > + > +For additional information on YAML syntax, refer to the specification > +at http://www.yaml.org/spec/1.2/spec.html > + > +YAML DT Binding Format > +---------------------- > + > +The DT binding format is based on the YAML Core schema defined in the > +specification. The following YAML sequences and keys are supported in > +the DT binding format: > + > +[Note: [R] and [O] denote required and optional sequences/keys,respectively] > + > +* [R] version: DT binding format version. Currently 1. > + > +* [R] id: unique identifier in property form (e.g. skel-device) > + > +* [R] title: title of the binding > + > +* [R] maintainer: sequence of maintainers > + [R] name: name and email of maintainer or mailing list in RFC822 > + form. > + > +* [O] description: full description of the binding > + > +* [O] inherits: sequence of inherited bindings > + [R] id: unique identifier of inherited binding > + > +* [R] properties: sequence of properties I've been playing around with this some. Just looking at what pyyaml does doing yaml.dump(yaml.load()) makes me think we need to change the syntax some. What comes out is much less readable than the input: - category: required description: Address and size of Skeleton Mini register range. name: reg - category: optional description: Enable synchronous transfer mode name: skel,sync-mode type: empty I suppose this could be fixed by changing the sorting in pyyaml somehow to keep "name" first, but why? And perhaps we don't care about generating yaml right now, but we could in the future. This is also making me wondering if we are using "-" in the right way looking at other examples. Most examples I've found use sequences for values, not key/value pairs. If I change "properties" sub nodes to be property names instead of "- name", the output remains readable: properties: compatible: constraint: '"skel,sk11" || "faux,fx11" , BASE("skel,sk11") ' description: FX11 is a clone of the original SK11 device reg: null skel,deprecated1: category: deprecated constraint: '(c >= 100000) && (c <= 200000) ' description: 'First of two deprecated properties. ' type: int Similarly, we'd want to align other uses of sequences. Nesting of sequences is also a bit awkward IMO compared to just adding indentation. This is where we need the YAML expert... Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree-spec" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
