On Sun, Aug 30, 2015 at 03:18:19PM -0700, Frank Rowand wrote:
> On 8/28/2015 11:55 AM, Rob Herring wrote:
> > On Fri, Aug 28, 2015 at 12:49 PM, Matt Porter <mporter@xxxxxxxxxxxx> wrote:
> >> On Fri, Aug 28, 2015 at 09:53:06AM -0500, Rob Herring wrote:
> >>> On Fri, Aug 28, 2015 at 12:23 AM, Matt Porter <mporter@xxxxxxxxxxxx> wrote:
> >>>> Add a skeleton DT binding document that serves as the canonical
> >>>> example for implementing YAML-based DT bindings documentation.
> >>>> The skeleton binding illustrates use of all fields and variations
> >>>> described in the dt-binding-format.txt documentation.
> >>>>
> >>>> Signed-off-by: Matt Porter <mporter@xxxxxxxxxxxx>
> >>>> ---
> >>>> Documentation/devicetree/bindings/skeleton.yaml | 98 +++++++++++++++++++++++++
> >>>> 1 file changed, 98 insertions(+)
> >>>> create mode 100644 Documentation/devicetree/bindings/skeleton.yaml
> >>>>
> >>>> diff --git a/Documentation/devicetree/bindings/skeleton.yaml b/Documentation/devicetree/bindings/skeleton.yaml
> >>>> new file mode 100644
> >>>> index 0000000..175965f
> >>>> --- /dev/null
> >>>> +++ b/Documentation/devicetree/bindings/skeleton.yaml
> >>>> @@ -0,0 +1,98 @@
> >>>> +%YAML 1.2
> >>>> +---
> >>>> +id: skel-device
> >>>> +
> >>>> +title: Skeleton Device
> >>>> +
> >>>> +maintainer:
> >>>> + - name: Skeleton Person <skel@xxxxxxxxxx>
> >>>
> >>> We'd want to tie this into get_maintainers.pl obviously.
> >>
> >> Right, I broke my rule of "no new tags for content we don't already
> >> have" by adding this. It stems out of the discussion at LPC where
> >> Mark suggested we could avoid the core bindings being moved by adding
> >> maintainer info into the binding itself.
> >
> > If you stated that rule, I missed it...
> >
> >> This is an area where more docs are needed. Ideally, on the first pass
> >> conversion we would not attempt to populate these. I had considered
> >> that we *could* only add maintainer: tags on core bindings to and
> >> adjust get_maintainers.pl to use that info to override the standard
> >> directory-based info if it exists. I don't think it's necessary to add
> >> a specific maintainer for all of the peripheral bindings if the default
> >> is the subsystem maintainer and the dt list. We could at least start
> >> directing core binding discussion to the -spec list which is where I
> >> think you'd like it.
>
> I think that adding the maintainer: tags for core bindings in the conversion
> process (and optionally add the tag for other bindings in the person
> converting has the driver and subsystem knowledge to intelligently
> do so -- not just a blind list from get_maintainer) would be a valid
> exception to your desire to not add new information on the conversion
> step. As much as other uses of information from bindings is near and
> dear to me, I think that throttling the binding review fire hose is
> the highest priority use of additional information.
Ok, and the other suggestion is to just populate it with the original
author so that's straightforward enough to do.
>
>
> > Yes, certainly this can solve my problem around handling core bindings.
> >
> > Some subsystem maintainers require a driver have a maintainer. We
> > could certainly enforce that too. We could probably automatically
> > populate this with the original author as a starting point. OTOH,
> > bindings should not change frequently.
> >
> >>
> >>>> +
> >>>> +description: >
> >>>> + The Skeleton Device binding represents the SK11 device produced by
> >>>> + the Skeleton Corporation. The binding can also support compatible
> >>>> + clones made by second source vendors.
> >>>> +
> >>>> +compatible:
> >>>> + - name: "skel,sk11"
> >>>> + - name: "faux,fx11"
> >>>
> >>> Is this an OR or AND? We need both.
> >>
> >> True, this only covers the OR case atm.
> >>
> >>> The complicated case is "one of {specific names} followed by {generic name}."
> >>
> >> I need to rethink these. I do have deprecated: tag for that case and
> >> possibly "name:" gets split to "generic:" and "specific:" and we can
> >> then do the right thing.
> >>
> >> For the above I would have:
> >>
> >> compatible:
> >> - specific: "skel,sk11"
> >> - specific: "faux,fx11"
> >
> > This can still be an AND or OR relationship.
> >
> >>
> >> and something like the Allwinner simple framebuffer would be:
> >>
> >> compatible:
> >> - generic: "simple-framebuffer"
> >> - specific: "allwinner,simple-framebuffer"
> >>
> >> where our validator would insist on seeing one of the specific: tags
> >> along with the generic: tag. A lot of bindings, given current doc
> >> patterns would just have two tags like above.
> >
> > We could follow Pantelis' suggestion and do C style logic expressions:
> >
> > name: ("chip1-ipblock" || "chip2-ipblock") && "generic-ipblock"
> >
> >
> >>
> >>>> + description: A clone of the original sk11 device
> >>>> +
> >>>> +required:
> >>>> + - name: "reg"
> >>>
> >>> We definitely need type info from the start.
> >>
> >> Are you sure? Ugh.
> >>
> >> My big contention here is that we don't carry that content in the
> >> docs today so we shouldn't try to add it in the initial conversion.
> >
> > What? We have that all over the place. Boolean properties, phandles, etc.
>
> Piling on... If the type information is obvious in the current binding
> doc, then it should be captured in the conversion and not lost. If the
> information is not currently present then it should not be required in
> the conversion step.
Ok.
> Which means that we need to define the how to specify the type information.
Agreed, I'm adding that to the format in v2.
> >> I think you are right in that we should have it documented in the
> >> schema but I'm concerned that we make the starting conversion
> >> effort too large by adding type info to all converted docs.
> >
> > How we do the conversion certainly needs to be worked out. However,
> > first we need some sort of agreement that yes this looks promising
> > before we spend too much time on it. We need to wait for all the YAML
> > haters to come out of hiding. :) Once the direction is settled, then
> > we can iron out the details of the structure. Finally, then we can
> > determine how to do the conversion. Just because we define how type
> > information looks doesn't mean it has to be there day 1.
> >
> >> I think we gain a lot even without at the start, but I understand
> >> why we need it and how it will help reduce the review firehose
> >> with the associated validation tools.
> >>
> >>>
> >>>> + description: chip select address of skeleton device
> >>>> + reference: spi-slave
> >>>
> >>> I would like to not have to list properties if the inherited binding
> >>> lists it. The problem is we need to say how many cells and the order
> >>> (not a problem here, but for mmio devices).
> >>
> >> Yeah, make sense.
> >>
> >>> Perhaps we can list the reference at the top level for the node
> >>> instead of for every property.
> >>
> >> That's a good point. I was wondering if per prop references would
> >> get unwieldy once we actually add them into all the converted docs.
> >> There's a huge number of existing docs without proper references.
> >
> > Yes, in many cases they are implied. It should be simple enough to
> > generate the list though whether they point to the doc file or just
> > list the properties.
> >
> >>
> >> Ok, I'll take a look at collecting references per group of properties.
> >>
> >>>
> >>>> + - name: "spi-max-frequency"
> >>>> + description: >
> >>>> + Maximum SPI clocking speed of skeleton device in Hz, must be
> >>>> + 1000000
> >>>> + reference: spi-slave
> >>>
> >>> Rather than listing the property and having constraint in description,
> >>> perhaps we could add constraints like this:
> >>>
> >>> - spi-max-frequency-range: 1000000 1000000
> >>>
> >>> Or groups of constraints:
> >>>
> >>> - spi-max-frequency-constraints:
> >>> range: 1000000 1000000
> >>> some-other-constraint: <value>
> >>
> >> I was hoping to avoid this to start due to my argument for keeping it
> >> simple for the first pass at conversion. However, the latter looks
> >> flexible enough. We have cases with enumerated values as well to handle
> >> the require some thought.
> >
> > We can always add constraints as a second step, but I'd like to define
> > the structure at least.
>
> Agreed, this is something that I would like to see defined, just to make
> sure that we can do it in a reasonable way with the proposed tool.
Will do, adding that in v2.
-Matt
--
To unsubscribe from this list: send the line "unsubscribe devicetree-spec" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
