[PATCH] tests: Add a failed test case for 'fdtoverlay' with long target path

[Fabrice Gasnier <fabrice.gasnier@xxxxxx>]

This adds a test case to demonstrate some issue seen when applying
overlays using 'fdtoverlay'. It fails with FDT_ERR_NOSPACE:
- with long target path
- symbols in order to use these nodes in possible subsequent overlay.

This is seen with this patch, by running:
$ make check # Reports a failed test
$ ./fdtoverlay -i tests/overlay_base.test.dtb -o out.dtb \
  tests/overlay_overlay_long_path.fdoverlay.test.dtb
  Failed to apply tests/overlay_overlay_long_path.fdoverlay.test.dtb (-3)

This overlay fails to apply, because dtb size is close to modulo 1024
bytes chunk: utilfdt_read() -> utilfdt_read_err() -> bufsize = 1024.

As there is not much extra space in the blob to resolve symbols (long
target path), it fails with FDT_ERR_NOSPACE. In fdtoverlay, size is :
 /* grow the blob to worst case */
 blob_len = fdt_totalsize(blob) + total_len;

I can see assumption is made that result should be lower than:
- base fdt size + overlay size. Is there a simple way to find to know
what the final size is?
I'm not sure what the correct fix might be, for such (worst) case?
Similar issue is also seen in u-boot/common/image-fit.c that implements
similar approach (e.g. base fdt size + overlay size).

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
---
 tests/overlay_base.dts              |  4 ++++
 tests/overlay_overlay_long_path.dts | 32 ++++++++++++++++++++++++++++++++
 tests/run_tests.sh                  |  8 ++++++++
 3 files changed, 44 insertions(+)
 create mode 100644 tests/overlay_overlay_long_path.dts

diff --git a/tests/overlay_base.dts b/tests/overlay_base.dts
index 2603adb..a5e55b2 100644
--- a/tests/overlay_base.dts
+++ b/tests/overlay_base.dts
@@ -14,6 +14,10 @@
 
 		subtest: sub-test-node {
 			sub-test-property;
+
+			subtest_with_long_path: sub-test-node-with-very-long-target-path {
+				long-test-path-property;
+			};
 		};
 	};
 };
diff --git a/tests/overlay_overlay_long_path.dts b/tests/overlay_overlay_long_path.dts
new file mode 100644
index 0000000..4f0d40b
--- /dev/null
+++ b/tests/overlay_overlay_long_path.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+/plugin/;
+
+&subtest_with_long_path {
+	lpath_0: test-0 {
+		prop = "lpath";
+	};
+
+	lpath_1: test-1 {
+		prop = "lpath";
+	};
+
+	lpath_2: test-2 {
+		prop = "lpath";
+	};
+
+	lpath_3: test-3 {
+		prop = "lpath";
+	};
+
+	lpath_4: test-4 {
+		prop = "lpath";
+	};
+
+	lpath_5: test-5 {
+		prop = "lpath";
+	};
+
+	lpath_6: test-6 {
+		prop = "lpath";
+	};
+};
diff --git a/tests/run_tests.sh b/tests/run_tests.sh
index 7348c9c..d1bba5d 100755
--- a/tests/run_tests.sh
+++ b/tests/run_tests.sh
@@ -894,6 +894,14 @@ fdtoverlay_tests() {
 
     # test that baz correctly inserted the property
     run_fdtoverlay_test baz "/foonode/barnode/baznode" "baz-property" "-ts" ${stacked_basedtb} ${stacked_targetdtb} ${stacked_bardtb} ${stacked_bazdtb}
+
+    overlay_long_path=overlay_overlay_long_path.dts
+    overlay_long_pathdtb=overlay_overlay_long_path.fdoverlay.test.dtb
+    target_long_pathdtb=overlay_overlay_long_path_target.fdoverlay.test.dtb
+    run_dtc_test -@ -I dts -O dtb -o $overlay_long_pathdtb $overlay_long_path
+
+    # test that fdtoverlay manages to apply overlays with long target path
+    run_fdtoverlay_test lpath "/test-node/sub-test-node/sub-test-node-with-very-long-target-path/test-0" "prop" "-ts" ${basedtb} ${target_long_pathdtb} ${overlay_long_pathdtb}
 }
 
 pylibfdt_tests () {
-- 
1.9.1