Hi,
i just checked this out, and build was successful:
you could either use -DWITH_PYTHON3=3.6 or just ignore this option.
i appreciate all the help here😁
Thank you all
Dorinda.
On Thu, Oct 29, 2020 at 10:37 PM kefu chai <tchaikov@xxxxxxxxx> wrote:
On Fri, Oct 30, 2020 at 8:52 AM Brad Hubbard <bhubbard@xxxxxxxxxx> wrote:
>
> -- ssl soname: libssl.so.1.1
> -- crypto soname: libcrypto.so.1.1
> CMake Error at /usr/share/cmake-3.10/Modules/FindPackageHandleStandardArgs.cmake:137
> (message):
> Could NOT find Python3 (missing: Python3_LIBRARY Python3_INCLUDE_DIR
> Development) (found suitable version "3.8.0", minimum required is "3")
> Call Stack (most recent call first):
> /usr/share/cmake-3.10/Modules/FindPackageHandleStandardArgs.cmake:378
> (_FPHSA_FAILURE_MESSAGE)
> cmake/modules/FindPython/Support.cmake:1181
> (find_package_handle_standard_args)
> cmake/modules/FindPython3.cmake:181 (include)
> CMakeLists.txt:432 (find_package)
>
> This happens if you have python3.8 installed, but not python3.8-dev as
> Kefu mentioned previously.
>
> Try 'apt-get install python3.8-dev' and see how much further you get.
i don't think ubuntu bionic ships python3.8 as a supported python3. it
comes with python3.6 though. see
https://packages.ubuntu.com/bionic/python3.
if you insist on using python3.8 you might want to install
python3.8-dev manually.
FWIW, do_cmake.sh does not pass -DWITH_PYTHON3=3.8 to cmake. instead
you could either use -DWITH_PYTHON3=3.6 or just ignore this option.
>
> On Fri, Oct 30, 2020 at 9:57 AM dorinda bassey <dorindabassey@xxxxxxxxx> wrote:
> >
> > okay, so after installing valgrind, and running ./do_cmake.sh heres the error output:
> > https://paste.sh/1dQL3GSW#YLXkLHPyoV9dlyTh8g_pdzow
> >
> > please find attached the error logs
> >
> > On Thu, Oct 29, 2020 at 5:46 PM Brad Hubbard <bhubbard@xxxxxxxxxx> wrote:
> >>
> >> So if you install valgrind how far does ./do_cmake.sh get now?
> >>
> >> If it still errors out could you include the entire output of the
> >> script as well as CMakeError.log and CMakeOutput.log?
> >>
> >> On Thu, Oct 29, 2020 at 8:22 PM dorinda bassey <dorindabassey@xxxxxxxxx> wrote:
> >> >
> >> > when i ran "./install-deps.sh" it completed without error
> >> > here's the output
> >> > https://paste.sh/vqn_g5Gz#Ido8-oMLfE1PGY8cFtUlkjHO
> >> >
> >> > On Wed, Oct 28, 2020 at 12:14 PM kefu chai <tchaikov@xxxxxxxxx> wrote:
> >> >>
> >> >> On Wed, Oct 28, 2020 at 10:05 PM dorinda bassey <dorindabassey@xxxxxxxxx> wrote:
> >> >> >
> >> >> > okay so i've tried this:
> >> >> > $ rm -rf build
> >> >> > $ mkdir build && cd $_
> >> >> > $ cmake3 -DWITH_PYTHON3=3.8 -DWITH_CCACHE=ON --trace-expand ..
> >> >> > and got this error output:
> >> >> > https://paste.sh/0orAJVkM#khoF1X09kmguHO5cC9JBEY3n
> >> >> > ps: i used "cmake -DWITH_PYTHON3=3.8 -DWITH_CCACHE=ON --trace-expand" since cmake3 is not installed.
> >> >> >
> >> >> > then i tried installing python 3 again, which is already installed on my machine
> >> >>
> >> >> the missing dependencies are provided by python3-all-dev i think. what
> >> >> was the output when you were running ./install-deps.sh ? did it
> >> >> completed without error?
> >> >>
> >> >> > and reran the command:
> >> >> > $ rm -rf build
> >> >> > $ mkdir build && cd $_
> >> >> > $ cmake3 -DWITH_PYTHON3=3.8 -DWITH_CCACHE=ON --trace-expand ..
> >> >> > this time the error output is different:
> >> >> > https://paste.sh/zB2AqQ09#0ArXE7MyMEPqnJppIXW7N2Bs
> >> >> > please find attached error log for this.
> >> >> >
> >> >> > On Tue, Oct 27, 2020 at 7:44 PM Brad Hubbard <bhubbard@xxxxxxxxxx> wrote:
> >> >> >>
> >> >> >> later
> >> >> >>
> >> >> >>
> >> >> >> On Wed, Oct 28, 2020 at 2:00 AM <dorindabassey@xxxxxxxxx> wrote:
> >> >> >> >
> >> >> >> > Yes, I have done that, before i got the error above.
> >> >> >> > but i noticed that once i installed curl, and ran these "./install-deps.sh" "./do_cmake.sh" again, i was able to get some more dependencies
> >> >> >> > now this is the error am recieving: https://paste.sh/fNyA_5fb#r7QJDagMxlRuHh6i591bB21s
> >> >> >> > quite similar but this time the error output is about python3, however i have python 2.7 and python 3.8.0 installed on my machine.
> >> >> >>
> >> >> >> You could try the following to see if it assists with debugging the issue.
> >> >> >>
> >> >> >> $ rm -rf build
> >> >> >> $ bash -x ./do_cmake.sh 2>&1|grep "^+ cmake"
> >> >> >> + cmake3 -DWITH_PYTHON3=3.8 -DWITH_CCACHE=ON ..
> >> >> >>
> >> >> >> The above gives you the base command you want to run later (it may be
> >> >> >> different to mine) that we add '--trace-expand' to shortly.
> >> >> >>
> >> >> >> $ rm -rf build
> >> >> >> $ mkdir build && cd $_
> >> >> >> $ cmake3 -DWITH_PYTHON3=3.8 -DWITH_CCACHE=ON --trace-expand ..
> >> >> >>
> >> >> >> See if that gives you any more information about why it can't find python3.
> >> >> >>
> >> >> >> --
> >> >> >> Cheers,
> >> >> >> Brad
> >> >> >>
> >> >> > _______________________________________________
> >> >> > Dev mailing list -- dev@xxxxxxx
> >> >> > To unsubscribe send an email to dev-leave@xxxxxxx
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Regards
> >> >> Kefu Chai
> >>
> >>
> >>
> >> --
> >> Cheers,
> >> Brad
> >>
>
>
> --
> Cheers,
> Brad
>
--
Regards
Kefu Chai
_______________________________________________ Dev mailing list -- dev@xxxxxxx To unsubscribe send an email to dev-leave@xxxxxxx
