This patch provides support for the reception of NN options in (PART)OPEN state.
It is a combination of change_recv() and confirm_recv(), specifically geared
towards receiving the `fast-path' NN options.
Signed-off-by: Gerrit Renker <gerrit@xxxxxxxxxxxxxx>
Acked-by: Ian McDonald <ian.mcdonald@xxxxxxxxxxx>
**** EDITORIAL: patches merged into this one from earlier iterations ***********
dccp: Don't Reset On Confirm for Old NN Feature Values
The Current DCCP code resets the connection when it encounters a Confirm
for an NN feature with a value that doesn't match the most recent Change
sent. However, this causes unneeded resets if an NN option changes twice
within two RTTs. Further, this would break on the multiple Change
options for a feature in one packet example in RFC4340 6.6.1.
This patch modifies the code to simply ignore such a Confirm Option.
Signed-off-by: Samuel Jero <sj323707@xxxxxxxx>
**** EDITORIAL: patches merged into this one from earlier iterations ***********
dccp: Only activate NN values after receiving the Confirm option
This defers changing local values using exchange of NN options in established
connection state by only activating the value after receiving the Confirm
option, as mandated by RFC 4340, 6.6.1.
Signed-off-by: Gerrit Renker <gerrit@xxxxxxxxxxxxxx>
**** EDITORIAL: patches merged into this one from earlier iterations ***********
---
net/dccp/feat.c | 117 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 117 insertions(+), 0 deletions(-)
--- a/net/dccp/feat.c
+++ b/net/dccp/feat.c
@@ -344,6 +344,20 @@ static int __dccp_feat_activate(struct sock *sk, const int idx,
return dccp_feat_table[idx].activation_hdlr(sk, val, rx);
}
+/**
+ * dccp_feat_activate - Activate feature value on socket
+ * @sk: fully connected DCCP socket (after handshake is complete)
+ * @feat_num: feature to activate, one of %dccp_feature_numbers
+ * @local: whether local (1) or remote (0) @feat_num is meant
+ * @fval: the value (SP or NN) to activate, or NULL to use the default value
+ * For general use this function is preferable over __dccp_feat_activate().
+ */
+static int dccp_feat_activate(struct sock *sk, u8 feat_num, bool local,
+ dccp_feat_val const *fval)
+{
+ return __dccp_feat_activate(sk, dccp_feat_index(feat_num), local, fval);
+}
+
/* Test for "Req'd" feature (RFC 4340, 6.4) */
static inline int dccp_feat_must_be_understood(u8 feat_num)
{
@@ -1252,6 +1266,100 @@ confirmation_failed:
}
/**
+ * dccp_feat_handle_nn_established - Fast-path reception of NN options
+ * @sk: socket of an established DCCP connection
+ * @mandatory: whether @opt was preceded by a Mandatory option
+ * @opt: %DCCPO_CHANGE_L | %DCCPO_CONFIRM_R (NN only)
+ * @feat: NN number, one of %dccp_feature_numbers
+ * @val: NN value
+ * @len: length of @val in bytes
+ * This function combines the functionality of change_recv/confirm_recv, with
+ * the following differences (reset codes are the same):
+ * - cleanup after receiving the Confirm;
+ * - values are directly activated after successful parsing;
+ * - deliberately restricted to NN features.
+ * The restriction to NN features is essential since SP features can have non-
+ * predictable outcomes (depending on the remote configuration), and are inter-
+ * dependent (CCIDs for instance cause further dependencies).
+ */
+static u8 dccp_feat_handle_nn_established(struct sock *sk, u8 mandatory, u8 opt,
+ u8 feat, u8 *val, u8 len)
+{
+ struct list_head *fn = &dccp_sk(sk)->dccps_featneg;
+ const bool local = (opt == DCCPO_CONFIRM_R);
+ struct dccp_feat_entry *entry;
+ u8 type = dccp_feat_type(feat);
+ dccp_feat_val fval;
+
+ dccp_feat_print_opt(opt, feat, val, len, mandatory);
+
+ /* Ignore non-mandatory unknown and non-NN features */
+ if (type == FEAT_UNKNOWN) {
+ if (local && !mandatory)
+ return 0;
+ goto fast_path_unknown;
+ } else if (type != FEAT_NN) {
+ return 0;
+ }
+
+ /*
+ * We don't accept empty Confirms, since in fast-path feature
+ * negotiation the values are enabled immediately after sending
+ * the Change option.
+ * Empty Changes on the other hand are invalid (RFC 4340, 6.1).
+ */
+ if (len == 0 || len > sizeof(fval.nn))
+ goto fast_path_unknown;
+
+ if (opt == DCCPO_CHANGE_L) {
+ fval.nn = dccp_decode_value_var(val, len);
+ if (!dccp_feat_is_valid_nn_val(feat, fval.nn))
+ goto fast_path_unknown;
+
+ if (dccp_feat_push_confirm(fn, feat, local, &fval) ||
+ dccp_feat_activate(sk, feat, local, &fval))
+ return DCCP_RESET_CODE_TOO_BUSY;
+
+ /* set the `Ack Pending' flag to piggyback a Confirm */
+ inet_csk_schedule_ack(sk);
+
+ } else if (opt == DCCPO_CONFIRM_R) {
+ entry = dccp_feat_list_lookup(fn, feat, local);
+ if (entry == NULL || entry->state != FEAT_CHANGING)
+ return 0;
+
+ fval.nn = dccp_decode_value_var(val, len);
+ /*
+ * Just ignore a value that doesn't match our current value.
+ * If the option changes twice within two RTTs, then at least
+ * one CONFIRM will be received for the old value after a
+ * new CHANGE was sent.
+ */
+ if (fval.nn != entry->val.nn)
+ return 0;
+
+ /* Only activate after receiving the Confirm option (6.6.1). */
+ dccp_feat_activate(sk, feat, local, &fval);
+
+ /* It has been confirmed - so remove the entry */
+ dccp_feat_list_pop(entry);
+
+ } else {
+ DCCP_WARN("Received illegal option %u\n", opt);
+ goto fast_path_failed;
+ }
+ return 0;
+
+fast_path_unknown:
+ if (!mandatory)
+ return dccp_push_empty_confirm(fn, feat, local);
+
+fast_path_failed:
+ return mandatory ? DCCP_RESET_CODE_MANDATORY_ERROR
+ : DCCP_RESET_CODE_OPTION_ERROR;
+}
+
+/**
* dccp_feat_parse_options - Process Feature-Negotiation Options
* @sk: for general use and used by the client during connection setup
* @dreq: used by the server during connection setup
@@ -1286,6 +1394,15 @@ int dccp_feat_parse_options(struct sock *sk, struct dccp_request_sock *dreq,
return dccp_feat_confirm_recv(fn, mandatory, opt, feat,
val, len, server);
}
+ break;
+ /*
+ * Support for exchanging NN options on an established connection
+ * This is currently restricted to Ack Ratio (RFC 4341, 6.1.2)
+ */
+ case DCCP_OPEN:
+ case DCCP_PARTOPEN:
+ return dccp_feat_handle_nn_established(sk, mandatory, opt, feat,
+ val, len);
}
return 0; /* ignore FN options in all other states */
}
--
To unsubscribe from this list: send the line "unsubscribe dccp" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
