[DCCP]: Correct documentation This corrects erroneous documentation of the socket API. Signed-off-by: Gerrit Renker <gerrit@xxxxxxxxxxxxxx> --- Documentation/networking/dccp.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/Documentation/networking/dccp.txt +++ b/Documentation/networking/dccp.txt @@ -61,12 +61,13 @@ be enabled at the receiver, too with sui DCCP_SOCKOPT_SEND_CSCOV sets the sender checksum coverage. Values in the range 0..15 are acceptable. The default setting is 0 (full coverage), values between 1..15 indicate partial coverage. -DCCP_SOCKOPT_SEND_CSCOV is for the receiver and has a different meaning: it +DCCP_SOCKOPT_RECV_CSCOV is for the receiver and has a different meaning: it sets a threshold, where again values 0..15 are acceptable. The default of 0 means that all packets with a partial coverage will be discarded. Values in the range 1..15 indicate that packets with minimally such a coverage value are also acceptable. The higher the number, the more - restrictive this setting (see [RFC 4340, sec. 9.2.1]). + restrictive this setting (see [RFC 4340, sec. 9.2.1]). Partial coverage + settings are inherited to the child socket after accept(). The following two options apply to CCID 3 exclusively and are getsockopt()-only. In either case, a TFRC info struct (defined in <linux/tfrc.h>) is returned. - To unsubscribe from this list: send the line "unsubscribe dccp" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
