Re: [PATCH 4/7]: Provide function for RTT sampling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



|  Is 100 microseconds a bit high perhaps? I'm seeing about 250
|  microseconds on a 100 Mbits LAN and therefore presumably on a 10 Gbits
|  LAN it could be as low as 2.5 microseconds??
This is correct, but these are not speeds that CCID 3 can handle. From my
calculations, the maximum speed is about 12 kilobits/second: the best possible
t_gran is 1 millisecond; whenever t_ipi < t_gran, then the speed of sending
packets is no longer controlled by the packet scheduling.
-
To unsubscribe from this list: send the line "unsubscribe dccp" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Kernel]     [IETF DCCP]     [Linux Networking]     [Git]     [Security]     [Linux Assembly]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux SCSI]

  Powered by Linux