try this as a test:
1. grab libtool 1.5.10 (or higher)
2. extract and run ./configure
3. in your sasl src dir, run gmake
clean
4. copy the libtool file from the 1.5.10 dir into your sasl
src root
5. gmake, go into plugins/.libs
6. check chatr/ldd on the libs then
i have seen libtool act odd on hp in the past so just
trying something diff...
From: Hiro Lalwani [mailto:meetmehiro@xxxxxxxxx]
Sent: Thursday, September 10, 2009 2:25 PM
To: Kyle Chapman
Cc: Alexey Melnikov; cyrus-sasl@xxxxxxxxxxxxxxxxxxxx
Subject: Re: Cyrus SASL + Compile
Hi Kyle,
Thanks again !!!!!
Thanks again !!!!!
Please find the libc Patch and ld version details. all are updated.
PHCO_34599 1.0 libc cumulative patch
ld -V
92453-07 linker command s800.sgs ld PA64 B.11.59 REL 061208
ld: 92453-07 linker linker ld B.11.55 060724
Please find the below chatr out. which seems Completely different which you have pasted chatr o/p in the previous mail .
chatr libdigestmd5.sl
libdigestmd5.sl:
shared library
shared library dynamic path search:
SHLIB_PATH disabled second
92453-07 linker command s800.sgs ld PA64 B.11.59 REL 061208
ld: 92453-07 linker linker ld B.11.55 060724
Please find the below chatr out. which seems Completely different which you have pasted chatr o/p in the previous mail .
chatr libdigestmd5.sl
libdigestmd5.sl:
shared library
shared library dynamic path search:
SHLIB_PATH disabled second
embedded path disabled first Not Defined
internal
name:
libdigestmd5.sl.2
libdigestmd5.sl.2
shared vtable support
disabled
explicit unloading enabled
static branch prediction disabled
executable from stack: D (default)
kernel assisted branch prediction enabled
lazy swap allocation disabled
text segment locking disabled
data segment locking disabled
third quadrant private data space disabled
fourth quadrant private data space disabled
third quadrant global data space disabled
data page size: D (default)
instruction page size: D (default)
nulptr references disabled
shared library private mapping disabled
explicit unloading enabled
static branch prediction disabled
executable from stack: D (default)
kernel assisted branch prediction enabled
lazy swap allocation disabled
text segment locking disabled
data segment locking disabled
third quadrant private data space disabled
fourth quadrant private data space disabled
third quadrant global data space disabled
data page size: D (default)
instruction page size: D (default)
nulptr references disabled
shared library private mapping disabled
Could you please tell me, what is going wrong here
?
thanks in advance
Hiro Lalwani
On Thu, Sep 10, 2009 at 11:13 PM, Kyle Chapman <Kyle.Chapman@xxxxxx> wrote:
when i check:chatr libgssapiv2.sl
libgssapiv2.sl:
shared library
shared library dynamic path search:
SHLIB_PATH disabled second
embedded path enabled first /usr/lib/sasl2
internal name:
libgssapiv2.sl.2
shared library list:
dynamic /opt/mit/lib/libgssapi_krb5.2
dynamic /opt/mit/lib/libkrb5.3
dynamic /opt/mit/lib/libk5crypto.3
dynamic /opt/mit/lib/libcom_err.3
dynamic /opt/mit/lib/libkrb5support.0
dynamic /usr/lib/libc.2chatr libotp.sl
libotp.sl:
shared library
shared library dynamic path search:
SHLIB_PATH disabled second
embedded path enabled first /usr/lib/sasl2
internal name:
libotp.sl.2
shared library list:
dynamic /opt/openssl/lib/libcrypto.sl
dynamic /usr/local/lib/libopie.sl.2.4
dynamic /usr/lib/libc.2chatr libdigestmd5.sl
libdigestmd5.sl:
shared library
shared library dynamic path search:
SHLIB_PATH disabled second
embedded path enabled first /usr/lib/sasl2
internal name:
libdigestmd5.sl.2
shared library list:
dynamic /opt/openssl/lib/libcrypto.sl
dynamic /usr/lib/libc.2i happen to be using openldap 2.4.17 on this system, and using gssapi and digest-md5 sasl mechs with ldapsearch work...perhaps related, are you up to date with libc/ld patches?here is my ld ver.ld -V
92453-07 linker command s800.sgs ld PA64 B.11.63 REL 071126my libc patch level:PHCO_34599
From: Hiro Lalwani [mailto:meetmehiro@xxxxxxxxx]Sent: Thursday, September 10, 2009 1:25 PM
To: Kyle Chapman; Alexey MelnikovHi Kyle / Alexey,I have run the configure with parameters(CC,CFLAGS...) which is suggested by Kyle on 11.23 PA-UNIX system and still I am seeing same Undefined symbol issue with PA system also.Please find the below run.sh file , which I have used for the "configure"==========================================================export LIBS="-lgss -lkrb5 -lk5crypto -lcom_err -lcrypto -lpthread"
export CC="cc -Ae"
export CFLAGS="-I/usr/local/include"
export CPPFLAGS="-I/usr/local/include"
export LDFLAGS="-L/usr/local/lib -Wl,+b -Wl,/usr/local/lib"./configure --prefix=/opt/iexpress/cyrussasl --enable-krb4 \
--enable-login --with-openssl=/opt/openssl \
--with-bdb-incdir=/usr/local/include --enable-static --enable-shared=yes \
--enable-digest --enable-gssapi=/usr/lib/============================================================Please find the attached "configure_logs", "gmake_logs" and "gmake_install_logs" . could you please look into this and let me know what is still missing?I am requesting you, please help me to resolve this issue and I am continuously seeing this issue.===================================================ldd -r libgssapiv2.sl.2.23
symbol not found: GSS_C_NT_HOSTBASED_SERVICE (libgssapiv2.sl.2.23)
symbol not found: GSS_C_NT_USER_NAME (libgssapiv2.sl.2.23)
symbol not found: __SB_masks (libgssapiv2.sl.2.23)
symbol not found: memset (libgssapiv2.sl.2.23)
symbol not found: _isdigit (libgssapiv2.sl.2.23)
symbol not found: getaddrinfo (libgssapiv2.sl.2.23)
symbol not found: memcpy (libgssapiv2.sl.2.23)
symbol not found: freeaddrinfo (libgssapiv2.sl.2.23)
symbol not found: strlen (libgssapiv2.sl.2.23)
symbol not found: strcpy (libgssapiv2.sl.2.23)
symbol not found: strchr (libgssapiv2.sl.2.23)
symbol not found: strncpy (libgssapiv2.sl.2.23)
symbol not found: strcat (libgssapiv2.sl.2.23)
symbol not found: strerror (libgssapiv2.sl.2.23)
symbol not found: uname (libgssapiv2.sl.2.23)
symbol not found: snprintf (libgssapiv2.sl.2.23)
symbol not found: gss_display_status (libgssapiv2.sl.2.23)
symbol not found: gss_release_buffer (libgssapiv2.sl.2.23)
symbol not found: gss_wrap (libgssapiv2.sl.2.23)
symbol not found: gss_unwrap (libgssapiv2.sl.2.23)
symbol not found: gss_delete_sec_context (libgssapiv2.sl.2.23)
symbol not found: gss_release_name (libgssapiv2.sl.2.23)
symbol not found: gss_release_cred (libgssapiv2.sl.2.23)
symbol not found: sprintf (libgssapiv2.sl.2.23)
symbol not found: gss_import_name (libgssapiv2.sl.2.23)
symbol not found: gss_acquire_cred (libgssapiv2.sl.2.23)
symbol not found: gss_accept_sec_context (libgssapiv2.sl.2.23)
symbol not found: gss_display_name (libgssapiv2.sl.2.23)
symbol not found: gss_compare_name (libgssapiv2.sl.2.23)
symbol not found: strdup (libgssapiv2.sl.2.23)
symbol not found: gss_wrap_size_limit (libgssapiv2.sl.2.23)
symbol not found: gss_init_sec_context (libgssapiv2.sl.2.23)
symbol not found: gss_inquire_context (libgssapiv2.sl.2.23)
symbol not found: __sys_atexit (/usr/ccs/lib/lddstub)
symbol not found: __errno (/usr/ccs/lib/lddstub)
=================================================================================Thanks in advanceHiro Lalwani
On Thu, Sep 10, 2009 at 1:05 AM, Kyle Chapman <Kyle.Chapman@xxxxxx> wrote:
it cant hurt to try that.
From: Hiro Lalwani [mailto:meetmehiro@xxxxxxxxx]
Sent: Wednesday, September 09, 2009 2:45 PM
To: Kyle Chapman
Cc: Alexey Melnikov; cyrus-sasl@xxxxxxxxxxxxxxxxxxxx
Subject: Re: Cyrus SASL + CompileHi Kyle,This is the hpux ia64 system. and system is up with 11.23.Can I go ahead and re-build again with below flags which you have mentioned in mail ?========================CC=cc -Ae
CFLAGS=-I/usr/local/include
CPPFLAGS=-I/usr/local/includeLDFLAGS=-L/usr/local/lib -Wl,+b -Wl,/usr/local/lib=====================================RegardsHiro Lawani
On Wed, Sep 9, 2009 at 11:58 PM, Kyle Chapman <Kyle.Chapman@xxxxxx> wrote:
i would not use: LDFLAGS="-Wl,+nodefaultrpath"is this hpux ai64 and parisc? i have just built this on 11iv2/parisc and not had this missing symbol issue. note that i set:CC=cc -Ae
CFLAGS=-I/usr/local/include
CPPFLAGS=-I/usr/local/includeLDFLAGS=-L/usr/local/lib -Wl,+b -Wl,/usr/local/lib
From: cyrus-sasl-bounces+kyle_chapman=g1.com@lists.andrew.cmu.edu [mailto:cyrus-sasl-bounces+kyle_chapman=g1.com@lists.andrew.cmu.edu] On Behalf Of Hiro Lalwani
Sent: Wednesday, September 09, 2009 2:21 PM
To: Alexey Melnikov
Cc: cyrus-sasl@xxxxxxxxxxxxxxxxxxxx
Subject: Re: Cyrus SASL + Compilemissed to add below also in previous mail for DIGEST-MD5.ldd -r libdigestmd5.so.2.23
symbol not found: malloc (./libdigestmd5.so.2.23)
symbol not found: _memcpy (./libdigestmd5.so.2.23)
symbol not found: uname (./libdigestmd5.so.2.23)
symbol not found: _memset (./libdigestmd5.so.2.23)
symbol not found: freeaddrinfo (./libdigestmd5.so.2.23)
symbol not found: _isupper (./libdigestmd5.so.2.23)
symbol not found: strerror (./libdigestmd5.so.2.23)
symbol not found: snprintf (./libdigestmd5.so.2.23)
symbol not found: DES_key_sched (./libdigestmd5.so.2.23)
symbol not found: sprintf (./libdigestmd5.so.2.23)
symbol not found: strncpy (./libdigestmd5.so.2.23)
symbol not found: getaddrinfo (./libdigestmd5.so.2.23)
symbol not found: strpbrk (./libdigestmd5.so.2.23)
symbol not found: __SB_masks (./libdigestmd5.so.2.23)
symbol not found: strcasecmp (./libdigestmd5.so.2.23)
symbol not found: DES_ede3_cbc_encrypt (./libdigestmd5.so.2.23)
symbol not found: free (./libdigestmd5.so.2.23)
symbol not found: _isdigit (./libdigestmd5.so.2.23)
symbol not found: strncasecmp (./libdigestmd5.so.2.23)
symbol not found: DES_cbc_encrypt (./libdigestmd5.so.2.23)
symbol not found: strcat (./libdigestmd5.so.2.23)
symbol not found: strchr (./libdigestmd5.so.2.23)
symbol not found: strcmp (./libdigestmd5.so.2.23)
symbol not found: strcpy (./libdigestmd5.so.2.23)
symbol not found: strdup (./libdigestmd5.so.2.23)
symbol not found: strlen (./libdigestmd5.so.2.23)
symbol not found: strtol (./libdigestmd5.so.2.23)
symbol not found: time (./libdigestmd5.so.2.23)Please help me to resolve this issue... I am continuously seeing this issue.RegardsHiro LalwaniOn Wed, Sep 9, 2009 at 11:40 PM, Hiro Lalwani <meetmehiro@xxxxxxxxx> wrote:
Hi Alexey,I have applied a changes what you have suggested and the issue gets resolved and build successfully done.I have used the below parameter during configure,===================================================================================export LIBS="-lgss -lkrb5 -lk5crypto -lcom_err -lcrypto -lpthread"
export CC="aCC "
export LDFLAGS="-Wl,+nodefaultrpath"
export CFLAGS="+DD32"
./configure --prefix=/opt/iexpress/cyrussasl --enable-krb4 \
--enable-login --with-openssl=/opt/openssl \
--with-bdb-incdir=/usr/local/include --enable-static --enable-shared=yes \
--enable-digest --enable-gssapi=/usr/lib/
======================================================================================But still I am seeing Undefined symbol in below shared libraries after completely successfully build.==================================================================================================
itanika7# ldd -r libgssapiv2.so
symbol not found: gss_display_name (./libgssapiv2.so)
symbol not found: _memcpy (./libgssapiv2.so)
symbol not found: gss_inquire_context (./libgssapiv2.so)
symbol not found: uname (./libgssapiv2.so)
symbol not found: _memset (./libgssapiv2.so)
symbol not found: freeaddrinfo (./libgssapiv2.so)
symbol not found: gss_release_name (./libgssapiv2.so)
symbol not found: strerror (./libgssapiv2.so)
symbol not found: GSS_C_NT_HOSTBASED_SERVICE (./libgssapiv2.so)
symbol not found: snprintf (./libgssapiv2.so)
symbol not found: sprintf (./libgssapiv2.so)
symbol not found: strncpy (./libgssapiv2.so)
symbol not found: getaddrinfo (./libgssapiv2.so)
symbol not found: gss_acquire_cred (./libgssapiv2.so)
symbol not found: __SB_masks (./libgssapiv2.so)
symbol not found: gss_init_sec_context (./libgssapiv2.so)
symbol not found: gss_import_name (./libgssapiv2.so)
symbol not found: gss_delete_sec_context (./libgssapiv2.so)
symbol not found: gss_release_buffer (./libgssapiv2.so)
symbol not found: gss_wrap (./libgssapiv2.so)
symbol not found: gss_compare_name (./libgssapiv2.so)
symbol not found: _isdigit (./libgssapiv2.so)
symbol not found: GSS_C_NT_USER_NAME (./libgssapiv2.so)
symbol not found: gss_unwrap (./libgssapiv2.so)
symbol not found: gss_wrap_size_limit (./libgssapiv2.so)
symbol not found: gss_display_status (./libgssapiv2.so)
symbol not found: gss_accept_sec_context (./libgssapiv2.so)
symbol not found: gss_release_cred (./libgssapiv2.so)
symbol not found: strcat (./libgssapiv2.so)
symbol not found: strchr (./libgssapiv2.so)
symbol not found: strcpy (./libgssapiv2.so)
symbol not found: strdup (./libgssapiv2.so)
symbol not found: strlen (./libgssapiv2.so)
==============================================================================================================Could you please tell me, what is wrong here ?RegardsHiro Lalwani--
On Tue, Sep 8, 2009 at 10:45 PM, Alexey Melnikov <alexey.melnikov@xxxxxxxxx> wrote:
Hiro Lalwani wrote:
Hi All,
Hi,
I wonder if "last_invec.iov_base" is defined as "void *". Try changing each of the two "last_invec.iov_base" to "(char *)last_invec.iov_base".I have downloaded the Cyrus-SASL-2.1.23.
I am seeing below errors while initiating the "gmake".
-------------------------------------------------------------------------------------------------------------------------
"common.c", line 500: error #2852: _expression_ must be a pointer to a complete
object type
next_buf = last_invec.iov_base + last_invec.iov_len;
^
"common.c", line 516: error #2852: _expression_ must be a pointer to a complete
object type
next_buf = last_invec.iov_base + last_invec.iov_len;
-------------------------------------------------------------------------------------------------------------
Could any of please tell me, How can I resolve this?
--
thanks & regards
Hiro Lalwani
thanks & regards
Hiro Lalwani
--
thanks & regards
Hiro Lalwani
--
thanks & regards
Hiro Lalwani
--
thanks & regards
Hiro Lalwani
--
thanks & regards
Hiro Lalwani
