The cpufreq core supports the cpufreq_for_each_entry and
cpufreq_for_each_valid_entry macros helpers for iteration over the
cpufreq_frequency_table, so use them.
It should have no functional changes.
Signed-off-by: Stratos Karafotis <stratosk@xxxxxxxxxxxx>
---
drivers/cpufreq/s3c2416-cpufreq.c | 40 +++++++++++++++++----------------------
1 file changed, 17 insertions(+), 23 deletions(-)
diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
index 4626f90..3fcc7b1 100644
--- a/drivers/cpufreq/s3c2416-cpufreq.c
+++ b/drivers/cpufreq/s3c2416-cpufreq.c
@@ -265,8 +265,8 @@ out:
#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
{
+ struct cpufreq_frequency_table *pos;
int count, v, i, found;
- struct cpufreq_frequency_table *freq;
struct s3c2416_dvfs *dvfs;
count = regulator_count_voltages(s3c_freq->vddarm);
@@ -275,12 +275,11 @@ static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
return;
}
- freq = s3c_freq->freq_table;
- while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
- if (freq->frequency == CPUFREQ_ENTRY_INVALID)
- continue;
+ if (!count)
+ goto out;
- dvfs = &s3c2416_dvfs_table[freq->driver_data];
+ cpufreq_for_each_valid_entry(pos, s3c_freq->freq_table) {
+ dvfs = &s3c2416_dvfs_table[pos->driver_data];
found = 0;
/* Check only the min-voltage, more is always ok on S3C2416 */
@@ -292,13 +291,12 @@ static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
if (!found) {
pr_debug("cpufreq: %dkHz unsupported by regulator\n",
- freq->frequency);
- freq->frequency = CPUFREQ_ENTRY_INVALID;
+ pos->frequency);
+ pos->frequency = CPUFREQ_ENTRY_INVALID;
}
-
- freq++;
}
+out:
/* Guessed */
s3c_freq->regulator_latency = 1 * 1000 * 1000;
}
@@ -338,7 +336,7 @@ static struct notifier_block s3c2416_cpufreq_reboot_notifier = {
static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
{
struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
- struct cpufreq_frequency_table *freq;
+ struct cpufreq_frequency_table *pos;
struct clk *msysclk;
unsigned long rate;
int ret;
@@ -427,31 +425,27 @@ static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
s3c_freq->regulator_latency = 0;
#endif
- freq = s3c_freq->freq_table;
- while (freq->frequency != CPUFREQ_TABLE_END) {
+ cpufreq_for_each_entry(pos, s3c_freq->freq_table) {
/* special handling for dvs mode */
- if (freq->driver_data == 0) {
+ if (pos->driver_data == 0) {
if (!s3c_freq->hclk) {
pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
- freq->frequency);
- freq->frequency = CPUFREQ_ENTRY_INVALID;
+ pos->frequency);
+ pos->frequency = CPUFREQ_ENTRY_INVALID;
} else {
- freq++;
continue;
}
}
/* Check for frequencies we can generate */
rate = clk_round_rate(s3c_freq->armdiv,
- freq->frequency * 1000);
+ pos->frequency * 1000);
rate /= 1000;
- if (rate != freq->frequency) {
+ if (rate != pos->frequency) {
pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
- freq->frequency, rate);
- freq->frequency = CPUFREQ_ENTRY_INVALID;
+ pos->frequency, rate);
+ pos->frequency = CPUFREQ_ENTRY_INVALID;
}
-
- freq++;
}
/* Datasheet says PLL stabalisation time must be at least 300us,
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
