Re: [PATCH v3 5/7] ARM: dts: Exynos: add cpu nodes, opp and cpu clock configuration data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 7, 2014 at 9:50 PM, Sudeep Holla <Sudeep.Holla@xxxxxxx> wrote:
> On 07/02/14 15:55, Thomas Abraham wrote:
>> From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
>>
>> For all Exynos based platforms, add CPU nodes, operating points and cpu
>> clock data for migrating from Exynos specific cpufreq driver to using
>> generic cpufreq-cpu0 driver.
>>
>> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
>
> [...]
>
>> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
>> index 5c412aa..c613fc2 100644
>> --- a/arch/arm/boot/dts/exynos4x12.dtsi
>> +++ b/arch/arm/boot/dts/exynos4x12.dtsi
>> @@ -31,6 +31,42 @@
>>                 mshc0 = &mshc_0;
>>         };
>>
>> +       cpus {
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               cpu@0 {
>> +                       device_type = "cpu";
>> +                       compatible = "arm,cortex-a9";
>> +                       reg = <0>;
>> +                       clocks = <&clock 12>;
>> +                       clock-names = "cpu";
>> +
>> +                       operating-points = <
>> +                               1500000 1350000
>> +                               1400000 1287500
>> +                               1300000 1250000
>> +                               1200000 1187500
>> +                               1100000 1137500
>> +                               1000000 1087500
>> +                                900000 1037500
>> +                                800000 1000000
>> +                                700000  987500
>> +                                600000  975000
>> +                                500000  950000
>> +                                400000  925000
>> +                                300000  900000
>> +                                200000  900000
>> +                       >;
>> +                       clock-latency = <200000>;
>> +                       boost-frequency = <1500000 1350000>;
>
> This is confusing, 1350000 is not in the OPP frequency list or this is still
> following old binding with voltage. Either case this needs to be fixed.

Yes, I missed that. Will fix it. Thanks for your review.

Regards,
Thomas.


>
> Regards,
> Sudeep
>
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel Devel]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Forum]     [Linux SCSI]

  Powered by Linux