On Thu, Dec 19, 2013 at 09:16:48AM -0500, Anson Huang wrote: > i.MX6Q needs to update vddarm, vddsoc/pu regulators when cpu freq > is changed, each setpoint has different voltage, so we need to > pass vddarm, vddsoc/pu's freq-voltage info from dts together. > > Signed-off-by: Anson Huang <b20788@xxxxxxxxxxxxx> Applied after changing patch subject to be 'ARM: dts: imx6q: add vddsoc/pu setpoint info'. Shawn > --- > arch/arm/boot/dts/imx6q.dtsi | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi > index e7e8332..021e0cb 100644 > --- a/arch/arm/boot/dts/imx6q.dtsi > +++ b/arch/arm/boot/dts/imx6q.dtsi > @@ -30,6 +30,13 @@ > 792000 1150000 > 396000 975000 > >; > + fsl,soc-operating-points = < > + /* ARM kHz SOC-PU uV */ > + 1200000 1275000 > + 996000 1250000 > + 792000 1175000 > + 396000 1175000 > + >; > clock-latency = <61036>; /* two CLK32 periods */ > clocks = <&clks 104>, <&clks 6>, <&clks 16>, > <&clks 17>, <&clks 170>; > -- > 1.7.9.5 > > -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
