On Wed, Dec 18, 2013 at 03:05:39PM +0800, Shawn Guo wrote:
> On Tue, Dec 17, 2013 at 05:08:21PM -0500, Anson Huang wrote:
> > i.MX6Q needs to update vddarm, vddsoc/pu regulators when cpu freq
> > is changed, each setpoint has different voltage, so we need to
> > pass vddarm, vddsoc/pu's freq-voltage info from dts together.
> >
> > Signed-off-by: Anson Huang <b20788@xxxxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/cpufreq/cpufreq-imx6.txt | 39 ++++++++++++++++++++
>
> The binding doc changes should generally be part of driver changes or a
> separate patch, but never be part of dts patch.
>
> > arch/arm/boot/dts/imx6q.dtsi | 7 ++++
> > 2 files changed, 46 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-imx6.txt
> >
> > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-imx6.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-imx6.txt
> > new file mode 100644
> > index 0000000..0c71dbf
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-imx6.txt
> > @@ -0,0 +1,39 @@
> > +i.MX6 cpufreq driver
> > +-------------------
> > +
> > +i.MX6 SoC cpufreq driver for CPU frequency scaling.
> > +
>
> I think you need to either copy the text from cpufreq-cpu0.txt or refer
> to it for some necessary info such as where the properties should be
> defined, what required properties should be defined, and what properties
> are optional etc.
Right, I was confused before and not sure how to do that, so I copy the whole
cpu@0's dts as example, will add info to let user know this is a sub property
of cpu@0, and refer to cpufreq-cpu0.txt.
>
> > +Optional properties:
> > +-fsl,soc-operating-points: Specify vddsoc/pu voltage settings that must
> > + go with cpu0's operating-points.
> > +
> > +Examples:
> > +
> > + cpu@0 {
> > + compatible = "arm,cortex-a9";
> > + device_type = "cpu";
> > + reg = <0>;
> > + next-level-cache = <&L2>;
>
> Above properties are not related to cpufreq driver, maybe we can save
> them.
Yes, with above change, I can remove these properties.
>
> > + operating-points = <
> > + /* kHz uV */
> > + 1200000 1275000
> > + 996000 1250000
> > + 792000 1150000
> > + 396000 975000
> > + >;
> > + fsl,soc-operating-points = <
> > + /* ARM kHz SOC-PU uV */
> > + 1200000 1275000
> > + 996000 1250000
> > + 792000 1175000
> > + 396000 1175000
> > + >;
> > + clock-latency = <61036>; /* two CLK32 periods */
> > + clocks = <&clks 104>, <&clks 6>, <&clks 16>,
> > + <&clks 17>, <&clks 170>;
> > + clock-names = "arm", "pll2_pfd2_396m", "step",
> > + "pll1_sw", "pll1_sys";
> > + arm-supply = <®_arm>;
> > + pu-supply = <®_pu>;
> > + soc-supply = <®_soc>;
>
> Any properties in the example that are required for a successful driver
> probe should be documented in 'Required properties', and others are in
> 'Optional properties'.
I will not list so many properties as example as long as I describe this
preoperties should be included in cpu@0's node?
>
> Shawn
>
> > + };
> > diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
> > index e7e8332..021e0cb 100644
> > --- a/arch/arm/boot/dts/imx6q.dtsi
> > +++ b/arch/arm/boot/dts/imx6q.dtsi
> > @@ -30,6 +30,13 @@
> > 792000 1150000
> > 396000 975000
> > >;
> > + fsl,soc-operating-points = <
> > + /* ARM kHz SOC-PU uV */
> > + 1200000 1275000
> > + 996000 1250000
> > + 792000 1175000
> > + 396000 1175000
> > + >;
> > clock-latency = <61036>; /* two CLK32 periods */
> > clocks = <&clks 104>, <&clks 6>, <&clks 16>,
> > <&clks 17>, <&clks 170>;
> > --
> > 1.7.9.5
> >
> >
>
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
