This patch adds cpufreq callbacks to dpm_{suspend|resume}_noirq() for handling
suspend/resume of cpufreq governors. This is required for early suspend and late
resume of governors.
There are multiple problems that are fixed by this patch:
- Nishanth Menon (TI) found an interesting problem on his platform, OMAP. His board
wasn't working well with suspend/resume as calls for removing non-boot CPUs
was turning out into a call to drivers ->target() which then tries to play
with regulators. But regulators and their I2C bus were already suspended and
this resulted in a failure. This is why we need a PM notifier here.
- Lan Tianyu (Intel) & Jinhyuk Choi (Broadcom) found another issue where
tunables configuration for clusters/sockets with non-boot CPUs was getting
lost after suspend/resume, as we were notifying governors with
CPUFREQ_GOV_POLICY_EXIT on removal of the last cpu for that policy and so
deallocating memory for tunables.
Reported-by: Lan Tianyu <tianyu.lan@xxxxxxxxx>
Reported-by: Nishanth Menon <nm@xxxxxx>
Reported-by: Jinhyuk Choi <jinchoi@xxxxxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
drivers/base/power/main.c | 3 +++
drivers/cpufreq/cpufreq.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++
include/linux/cpufreq.h | 3 +++
3 files changed, 68 insertions(+)
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index c12e9b9..0fbe792 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -29,6 +29,7 @@
#include <linux/async.h>
#include <linux/suspend.h>
#include <trace/events/power.h>
+#include <linux/cpufreq.h>
#include <linux/cpuidle.h>
#include <linux/timer.h>
@@ -540,6 +541,7 @@ static void dpm_resume_noirq(pm_message_t state)
dpm_show_time(starttime, state, "noirq");
resume_device_irqs();
cpuidle_resume();
+ cpufreq_resume();
}
/**
@@ -955,6 +957,7 @@ static int dpm_suspend_noirq(pm_message_t state)
ktime_t starttime = ktime_get();
int error = 0;
+ cpufreq_suspend();
cpuidle_pause();
suspend_device_irqs();
mutex_lock(&dpm_list_mtx);
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 02d534d..540bd87 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/tick.h>
#include <trace/events/power.h>
@@ -47,6 +48,9 @@ static LIST_HEAD(cpufreq_policy_list);
static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor);
#endif
+/* Flag to suspend/resume CPUFreq governors */
+static bool cpufreq_suspended;
+
static inline bool has_target(void)
{
return cpufreq_driver->target_index || cpufreq_driver->target;
@@ -1462,6 +1466,54 @@ static struct subsys_interface cpufreq_interface = {
.remove_dev = cpufreq_remove_dev,
};
+/*
+ * Callbacks for suspending/resuming governors as some platforms can't change
+ * frequency after this point in suspend cycle. Because some of the devices
+ * (like: i2c, regulators, etc) they use for changing frequency are suspended
+ * quickly after this point.
+ */
+void cpufreq_suspend(void)
+{
+ struct cpufreq_policy *policy;
+ unsigned long flags;
+
+ if (!has_target())
+ return;
+
+ pr_debug("%s: Suspending Governors\n", __func__);
+
+ list_for_each_entry(policy, &cpufreq_policy_list, policy_list)
+ if (__cpufreq_governor(policy, CPUFREQ_GOV_STOP))
+ pr_err("%s: Failed to stop governor for policy: %p\n",
+ __func__, policy);
+
+ write_lock_irqsave(&cpufreq_driver_lock, flags);
+ cpufreq_suspended = true;
+ write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+}
+
+void cpufreq_resume(void)
+{
+ struct cpufreq_policy *policy;
+ unsigned long flags;
+
+ if (!has_target())
+ return;
+
+ pr_debug("%s: Resuming Governors\n", __func__);
+
+ write_lock_irqsave(&cpufreq_driver_lock, flags);
+ cpufreq_suspended = false;
+ write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+ list_for_each_entry(policy, &cpufreq_policy_list, policy_list)
+ if (__cpufreq_governor(policy, CPUFREQ_GOV_START) ||
+ __cpufreq_governor(policy,
+ CPUFREQ_GOV_LIMITS))
+ pr_err("%s: Failed to start governor for policy: %p\n",
+ __func__, policy);
+}
+
/**
* cpufreq_bp_suspend - Prepare the boot CPU for system suspend.
*
@@ -1752,6 +1804,8 @@ EXPORT_SYMBOL_GPL(cpufreq_driver_target);
static int __cpufreq_governor(struct cpufreq_policy *policy,
unsigned int event)
{
+ unsigned long flags;
+ bool is_suspended;
int ret;
/* Only must be defined when default governor is known to have latency
@@ -1764,6 +1818,14 @@ static int __cpufreq_governor(struct cpufreq_policy *policy,
struct cpufreq_governor *gov = NULL;
#endif
+ /* Don't start any governor operations if we are entering suspend */
+ read_lock_irqsave(&cpufreq_driver_lock, flags);
+ is_suspended = cpufreq_suspended;
+ read_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+ if (is_suspended)
+ return 0;
+
if (policy->governor->max_transition_latency &&
policy->cpuinfo.transition_latency >
policy->governor->max_transition_latency) {
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index dc196bb..6d93f91 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -255,6 +255,9 @@ struct cpufreq_driver {
int cpufreq_register_driver(struct cpufreq_driver *driver_data);
int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
+void cpufreq_suspend(void);
+void cpufreq_resume(void);
+
const char *cpufreq_get_current_driver(void);
static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy,
--
1.7.12.rc2.18.g61b472e
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
