On Mon, Aug 26, 2013 at 01:48:36PM +0200, Sascha Hauer wrote:
> For changing the cpu frequency the i.MX6q has to be switched to some
> intermediate clock during the PLL reprogramming. The driver tries
> to be clever to keep the enable count correct but gets it wrong. If
> the cpufreq is increased it calls clk_disable_unprepare twice
> on pll2_pfd2_396m. This puts all other devices which get their clock
> from pll2_pfd2_396m into a nonworking state.
So you're running into a problem in real? The clk_disable_unprepare on
pll2_pfd2_396m below will only be executed when are leaving 396MHz
set-point. It's there to balance the clk_prepare_enable on
pll2_pfd2_396m when we enters 396MHz set-point.
if (freqs.old * 1000 <= clk_get_rate(pll2_pfd2_396m_clk)) {
clk_prepare_enable(pll1_sys_clk);
clk_disable_unprepare(pll2_pfd2_396m_clk);
}
>
> Fix this by removing the clk enabling/disabling altogether since the
> clk core will do this automatically during a reparent.
It seems clk core will only enable the parent clock during the
clk_set_parent() call, and only in case that the child clock is
prepared. For example, I do not think pll2_pfd2_396m_clk and step_clk
will be altered to ON state. Or am I missing something?
clk_set_parent(step_clk, pll2_pfd2_396m_clk);
clk_set_parent(pll1_sw_clk, step_clk);
Shawn
>
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> ---
> drivers/cpufreq/imx6q-cpufreq.c | 17 -----------------
> 1 file changed, 17 deletions(-)
>
> diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
> index e37cdae..2971d12 100644
> --- a/drivers/cpufreq/imx6q-cpufreq.c
> +++ b/drivers/cpufreq/imx6q-cpufreq.c
> @@ -117,28 +117,11 @@ static int imx6q_set_target(struct cpufreq_policy *policy,
> * - Reprogram pll1_sys_clk and reparent pll1_sw_clk back to it
> * - Disable pll2_pfd2_396m_clk
> */
> - clk_prepare_enable(pll2_pfd2_396m_clk);
> clk_set_parent(step_clk, pll2_pfd2_396m_clk);
> clk_set_parent(pll1_sw_clk, step_clk);
> if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
> clk_set_rate(pll1_sys_clk, freqs.new * 1000);
> - /*
> - * If we are leaving 396 MHz set-point, we need to enable
> - * pll1_sys_clk and disable pll2_pfd2_396m_clk to keep
> - * their use count correct.
> - */
> - if (freqs.old * 1000 <= clk_get_rate(pll2_pfd2_396m_clk)) {
> - clk_prepare_enable(pll1_sys_clk);
> - clk_disable_unprepare(pll2_pfd2_396m_clk);
> - }
> clk_set_parent(pll1_sw_clk, pll1_sys_clk);
> - clk_disable_unprepare(pll2_pfd2_396m_clk);
> - } else {
> - /*
> - * Disable pll1_sys_clk if pll2_pfd2_396m_clk is sufficient
> - * to provide the frequency.
> - */
> - clk_disable_unprepare(pll1_sys_clk);
> }
>
> /* Ensure the arm clock divider is what we expect */
> --
> 1.8.4.rc3
>
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
