[PATCH v8 4/7] cpufreq:boost:Kconfig: Provide support for software managed BOOST

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For safety reasons new flag - CONFIG_CPU_FREQ_BOOST_SW has been added.
Only after selecting "EXYNOS Frequency Overclocking - Software" Kconfig
option the software managed boost is enabled. It also selects thermal
subsystem to be compiled in. Thermal is necessary for disabling boost
and cooling down the device when overheating detected.

Boost _MUST_NOT_ work without thermal subsystem with properly defined
overheating temperatures.

This option doesn't affect x86's ACPI hardware managed boost support
(i.e. Intel, AMD). In this situation boost management is embedded at
hardware.

Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
Signed-off-by: Myungjoo Ham <myungjoo.ham@xxxxxxxxxxx>
Acked-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>

---
Changes for v8:
- None

Changes for v7:
- Remove superfluous "default n" definition
- Generic CPU_FREQ_BOOST_SW depends on THERMAL

Changes for v6:
- CPU_FREQ_BOOST_SW [1] is now defined as "invisible" bool option.
- Platform dependent ARM_EXYNOS_CPU_FREQ_BOOST_SW config option has been
  added. It depends on ARM_EXYNOS_CPUFREQ options and selects
  EXYNOS_THERMAL with the main boost config [1].

Changes for v5:
- New patch

 drivers/cpufreq/Kconfig     |    4 ++++
 drivers/cpufreq/Kconfig.arm |   15 +++++++++++++++
 2 files changed, 19 insertions(+)

diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 534fcb8..e3cbf72 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -23,6 +23,10 @@ config CPU_FREQ_TABLE
 config CPU_FREQ_GOV_COMMON
 	bool
 
+config CPU_FREQ_BOOST_SW
+	bool
+	depends on THERMAL
+
 config CPU_FREQ_STAT
 	tristate "CPU frequency translation statistics"
 	select CPU_FREQ_TABLE
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 0fa204b..6a6d173 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -67,6 +67,21 @@ config ARM_EXYNOS5440_CPUFREQ
 
 	  If in doubt, say N.
 
+config ARM_EXYNOS_CPU_FREQ_BOOST_SW
+	bool "EXYNOS Frequency Overclocking - Software"
+	depends on ARM_EXYNOS_CPUFREQ
+	select CPU_FREQ_BOOST_SW
+	select EXYNOS_THERMAL
+	help
+	  This driver supports software managed overclocking (BOOST).
+	  It allows usage of special frequencies for Samsung Exynos
+	  processors if thermal conditions are appropriate.
+
+	  It reguires, for safe operation, thermal framework with properly
+	  defined trip points.
+
+	  If in doubt, say N.
+
 config ARM_HIGHBANK_CPUFREQ
 	tristate "Calxeda Highbank-based"
 	depends on ARCH_HIGHBANK
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel Devel]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Forum]     [Linux SCSI]

  Powered by Linux