We have common infrastructure available with us for getting a CPUs clk rate.
Lets use it for this driver.
We don't need a global variable to hold clock anymore.
Cc: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
drivers/cpufreq/omap-cpufreq.c | 32 ++++++++++----------------------
1 file changed, 10 insertions(+), 22 deletions(-)
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index 97610a3..09150fc 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -36,21 +36,9 @@
static struct cpufreq_frequency_table *freq_table;
static atomic_t freq_table_users = ATOMIC_INIT(0);
-static struct clk *mpu_clk;
static struct device *mpu_dev;
static struct regulator *mpu_reg;
-static unsigned int omap_getspeed(unsigned int cpu)
-{
- unsigned long rate;
-
- if (cpu >= NR_CPUS)
- return 0;
-
- rate = clk_get_rate(mpu_clk) / 1000;
- return rate;
-}
-
static int omap_target(struct cpufreq_policy *policy, unsigned int index)
{
int r, ret;
@@ -58,11 +46,11 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index)
unsigned long freq, volt = 0, volt_old = 0, tol = 0;
unsigned int old_freq, new_freq;
- old_freq = omap_getspeed(policy->cpu);
+ old_freq = policy->cur;
new_freq = freq_table[index].frequency;
freq = new_freq * 1000;
- ret = clk_round_rate(mpu_clk, freq);
+ ret = clk_round_rate(policy->clk, freq);
if (IS_ERR_VALUE(ret)) {
dev_warn(mpu_dev,
"CPUfreq: Cannot find matching frequency for %lu\n",
@@ -100,7 +88,7 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index)
}
}
- ret = clk_set_rate(mpu_clk, new_freq * 1000);
+ ret = clk_set_rate(policy->clk, new_freq * 1000);
/* scaling down? scale voltage after frequency */
if (mpu_reg && (new_freq < old_freq)) {
@@ -108,7 +96,7 @@ static int omap_target(struct cpufreq_policy *policy, unsigned int index)
if (r < 0) {
dev_warn(mpu_dev, "%s: unable to scale voltage down.\n",
__func__);
- clk_set_rate(mpu_clk, old_freq * 1000);
+ clk_set_rate(policy->clk, old_freq * 1000);
return r;
}
}
@@ -126,9 +114,9 @@ static int omap_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
- mpu_clk = clk_get(NULL, "cpufreq_ck");
- if (IS_ERR(mpu_clk))
- return PTR_ERR(mpu_clk);
+ policy->clk = clk_get(NULL, "cpufreq_ck");
+ if (IS_ERR(policy->clk))
+ return PTR_ERR(policy->clk);
if (policy->cpu >= NR_CPUS) {
result = -EINVAL;
@@ -168,7 +156,7 @@ static int omap_cpu_init(struct cpufreq_policy *policy)
fail_table:
freq_table_free();
fail_ck:
- clk_put(mpu_clk);
+ clk_put(policy->clk);
return result;
}
@@ -176,7 +164,7 @@ static int omap_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
freq_table_free();
- clk_put(mpu_clk);
+ clk_put(policy->clk);
return 0;
}
@@ -184,7 +172,7 @@ static struct cpufreq_driver omap_driver = {
.flags = CPUFREQ_STICKY,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = omap_target,
- .get = omap_getspeed,
+ .get = cpufreq_generic_get,
.init = omap_cpu_init,
.exit = omap_cpu_exit,
.name = "omap",
--
1.7.12.rc2.18.g61b472e
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
