This patch series introduces support for CPU overclocking technique called Boost. It is a follow up of a LAB governor proposal. Boost is a LAB component: http://thread.gmane.org/gmane.linux.kernel/1484746/match=cpufreq Boost unifies hardware based solution (e.g. Intel Nehalem) with software oriented one (like the one done at Exynos). For this reason cpufreq/freq_table code has been reorganized to include common code. Important design decisions: - Boost related code is compiled-in unconditionally to cpufreq core and disabled by default. The cpufreq_driver is responsibile for setting boost_supported flag and providing enable_boost callback(if HW support is needed). For software managed boost, special Kconfig flag - CONFIG_CPU_FREQ_BOOST_SW has been defined. It will be selectable only when a target platform has thermal framework properly configured. - struct cpufreq_driver has been extended with boost related fields: -- boost_supported - when driver supports boosting -- enable_boost - callback to function, which is necessary to enable boost - Boost sysfs attribute (/sys/devices/system/cpu/cpufreq/boost) is visible _only_ when cpufreq driver supports Boost. - No special spin_lock for Boost was created. The one from cpufreq core was reused. - All available policies are now stored in a list. - The Boost code doesn't rely on any policy. When boost state is changed, then the policy list is iterated and proper adjustements are done. - To improve safety level, the thermal framework is also extended to disable software boosting, when thermal trip point is reached. Then it starts monitoring of target temperature to evaluate if boost can be enabled again. This emulates behaviour similar to HW managed boost (like x86) New patches for v5: cpufreq:boost:Kconfig: Enable software managed BOOST support at Kconfig Documentation:cpufreq:boost: Update BOOST documentation Patches dropped at v5: cpufreq: Calculate number of busy CPUs cpufreq: Enable software boost only when up to one busy core is running Tested at: HW: Exynos 4412 3.10 linux Exynos 4210 3.10 linux Compile tested x86_64 defconfig (acpi) - help with HW (Intel Nehalem) test needed The code has been rebased on top of kernel_pm/bleeding-edge (3.11-rc1) Lukasz Majewski (7): cpufreq: Store cpufreq policies in a list cpufreq: Add boost frequency support in core cpufreq:acpi:x86: Adjust the acpi-cpufreq.c code to work with common boost solution cpufreq:exynos:Extend Exynos cpufreq driver to support boost framework thermal:boost: Automatic enable/disable of BOOST feature cpufreq:boost:Kconfig: Enable software managed BOOST support at Kconfig Documentation:cpufreq:boost: Update BOOST documentation Documentation/cpu-freq/boost.txt | 26 ++++----- drivers/cpufreq/Kconfig | 14 +++++ drivers/cpufreq/acpi-cpufreq.c | 69 +++++++---------------- drivers/cpufreq/cpufreq.c | 115 ++++++++++++++++++++++++++++++++++++++ drivers/cpufreq/exynos-cpufreq.c | 9 ++- drivers/cpufreq/freq_table.c | 47 +++++++++++++--- drivers/thermal/thermal_core.c | 31 ++++++++++ include/linux/cpufreq.h | 13 +++++ include/linux/thermal.h | 2 + 9 files changed, 257 insertions(+), 69 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
