Hi,
Change subject to: "cpufreq: Add boost frequency support in core"
On 11 June 2013 14:33, Lukasz Majewski <l.majewski@xxxxxxxxxxx> wrote:
> This commit adds support for software based frequency boosting.
No. It adds support for both software and hardware boosting. So just
write: This commit adds boost frequency support in cpufreq core (Hardware
& Software).
> Some SoC (like Exynos4 - e.g. 4x12) allow setting frequency above
> its normal condition limits. Such a change shall be only done for a short
s/condition/operation
s/change/mode
s/done/used
> time.
>
> Overclocking (boost) support is essentially provided by platform
> dependent cpufreq driver.
>
> This commit unifies support for SW and HW (Intel) over clocking solutions
> in the core cpufreq driver. Previously the "boost" sysfs attribute was
> defined at acpi driver code.
> By default boost is disabled. One global attribute is available at:
> /sys/devices/system/cpu/cpufreq/boost.
Enter a blank line here.
> It only shows up when cpufreq driver supports overclocking.
> Under the hood frequencies dedicated for boosting are marked with a
> special flag (CPUFREQ_BOOST_FREQ) at driver's frequency table.
> It is the user's concern to enable/disable overclocking with proper call to
> sysfs.
Good.
> Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
> Signed-off-by: Myungjoo Ham <myungjoo.ham@xxxxxxxxxxx>
>
> ---
> Changes for v2:
> - Removal of cpufreq_boost structure and move its fields to cpufreq_driver
> structure
> - Flag to indicate if global boost attribute is already defined
> - Extent the pr_{err|debbug} functions to show current function names
> ---
You don't have to manually add "---" here. Just keep a blank line instead.
> drivers/cpufreq/cpufreq.c | 69 ++++++++++++++++++++++++++++++++++++++++++
> drivers/cpufreq/freq_table.c | 57 ++++++++++++++++++++++++++++++++--
> include/linux/cpufreq.h | 12 ++++++++
> 3 files changed, 136 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
> index 1b8a48e..98ba5f1 100644
> --- a/drivers/cpufreq/cpufreq.c
> +++ b/drivers/cpufreq/cpufreq.c
> @@ -40,6 +40,7 @@
> * also protects the cpufreq_cpu_data array.
> */
> static struct cpufreq_driver *cpufreq_driver;
> +static bool cpufreq_boost_sysfs_defined;
> static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data);
> #ifdef CONFIG_HOTPLUG_CPU
> /* This one keeps track of the previously set governor of a removed CPU */
> @@ -315,6 +316,33 @@ EXPORT_SYMBOL_GPL(cpufreq_notify_transition);
> /*********************************************************************
> * SYSFS INTERFACE *
> *********************************************************************/
> +ssize_t show_boost_status(struct kobject *kobj,
> + struct attribute *attr, char *buf)
> +{
> + return sprintf(buf, "%d\n", cpufreq_driver->boost_en);
This isn't correct. It shows if cpufreq driver supports boost or
not and it should show if boost is enabled from sysfs when
cpufreq driver supports boost.
> +}
> +
> +static ssize_t store_boost_status(struct kobject *kobj, struct attribute *attr,
> + const char *buf, size_t count)
> +{
> + int ret, enable;
> +
> + ret = sscanf(buf, "%d", &enable);
> + if (ret != 1 || enable < 0 || enable > 1)
> + return -EINVAL;
> +
> + if (cpufreq_boost_trigger_state(enable)) {
> + pr_err("%s: Cannot %sable boost!\n", __func__,
> + enable ? "en" : "dis");
%sable doesn't look very much readable. Use complete strings:
"enable" and "disable".
> + return -EINVAL;
> + }
> +
> + return count;
> +}
> +
> +static struct global_attr global_boost = __ATTR(boost, 0644,
> + show_boost_status,
> + store_boost_status);
User define_one_global_rw.
> static struct cpufreq_governor *__find_governor(const char *str_governor)
> {
> @@ -754,6 +782,17 @@ static int cpufreq_add_dev_interface(unsigned int cpu,
Why not do this in cpufreq_register_driver()?
> goto err_out_kobj_put;
> drv_attr++;
> }
> + if (cpufreq_driver->low_level_boost && !cpufreq_boost_sysfs_defined) {
I thought low_level_boost() is a function which will only be supported
for drivers
using hardware boost feature, like intel. And so we must have used boost_en
here.
> + ret = sysfs_create_file(cpufreq_global_kobject,
> + &(global_boost.attr));
cpufreq_sysfs_create_file(), check 2361be23666232dbb4851a527f466c4cbf5340fc
for details.
> + if (ret) {
> + pr_err("%s: cannot register global boost sysfs file\n",
> + __func__);
> + goto err_out_kobj_put;
> + }
> + cpufreq_boost_sysfs_defined = 1;
> + }
> +
> if (cpufreq_driver->get) {
> ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
> if (ret)
> @@ -1853,6 +1892,30 @@ static struct notifier_block __refdata cpufreq_cpu_notifier = {
> };
>
> /*********************************************************************
> + * BOOST *
> + *********************************************************************/
> +int cpufreq_boost_trigger_state(int state)
> +{
> + int ret = 0;
> +
> + if (!cpufreq_driver->low_level_boost)
> + return -ENODEV;
I am certainly not aligned with your design. What's the
use of this field? And please update documentation too for these
new entries in cpufreq_driver structure.
> + if (cpufreq_driver->boost_en != state) {
So, you are using boost_en to see if boost is enabled from sysfs?
Then you have put it at wrong place.
I thought there would be three variables:
- cpufreq_driver->boost_supported: boost is enabled for driver
- cpufreq_driver->low_level_boost(): to set desired boost state
(Only for hardware boosting)
- boost_enabled: global variable in cpufreq.c file, used only if
cpufreq_driver->boost_supported is true.
> diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
> index d7a7966..4e4f692 100644
> --- a/drivers/cpufreq/freq_table.c
> +++ b/drivers/cpufreq/freq_table.c
> @@ -20,6 +20,27 @@
> * FREQUENCY TABLE HELPERS *
> *********************************************************************/
>
> +unsigned int
> +cpufreq_frequency_table_max(struct cpufreq_frequency_table *freq_table,
> + int boost)
> +{
> + int i = 0, boost_freq_max = 0, freq_max = 0;
> +
> + for (; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
> + if (freq_table[i].index == CPUFREQ_BOOST_FREQ) {
> + if (freq_table[i].frequency > boost_freq_max)
> + boost_freq_max = freq_table[i].frequency;
Do above only when boost==true and below when boost==false.
> + } else {
> + if (freq_table[i].frequency > freq_max)
> + freq_max = freq_table[i].frequency;
> + }
> + }
> +
> + return boost ? boost_freq_max : freq_max;
> +
> +}
> +EXPORT_SYMBOL_GPL(cpufreq_frequency_table_max);
> +
> int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
> struct cpufreq_frequency_table *table)
> {
> @@ -171,7 +192,8 @@ static DEFINE_PER_CPU(struct cpufreq_frequency_table *, cpufreq_show_table);
> /**
> * show_available_freqs - show available frequencies for the specified CPU
> */
> -static ssize_t show_available_freqs(struct cpufreq_policy *policy, char *buf)
> +static ssize_t show_available_freqs(struct cpufreq_policy *policy, char *buf,
> + int show_boost)
> {
> unsigned int i = 0;
> unsigned int cpu = policy->cpu;
> @@ -186,22 +208,53 @@ static ssize_t show_available_freqs(struct cpufreq_policy *policy, char *buf)
> for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
> if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
> continue;
> + if (show_boost)
> + if (table[i].index != CPUFREQ_BOOST_FREQ)
> + continue;
> +
Looks wrong. You will show boost freqs when show_boost is false.
> count += sprintf(&buf[count], "%d ", table[i].frequency);
> }
> count += sprintf(&buf[count], "\n");
>
> return count;
> +}
>
> +/**
> + * show_available_normal_freqs - show normal boost frequencies for
> + * the specified CPU
> + */
> +static ssize_t show_available_normal_freqs(struct cpufreq_policy *policy,
> + char *buf)
> +{
> + return show_available_freqs(policy, buf, 0);
> }
>
> struct freq_attr cpufreq_freq_attr_scaling_available_freqs = {
> .attr = { .name = "scaling_available_frequencies",
> .mode = 0444,
> },
> - .show = show_available_freqs,
> + .show = show_available_normal_freqs,
> };
> EXPORT_SYMBOL_GPL(cpufreq_freq_attr_scaling_available_freqs);
>
> +/**
> + * show_available_boost_freqs - show available boost frequencies for
> + * the specified CPU
> + */
> +static ssize_t show_available_boost_freqs(struct cpufreq_policy *policy,
> + char *buf)
> +{
> + return show_available_freqs(policy, buf, 1);
> +}
> +
> +struct freq_attr cpufreq_freq_attr_boost_available_freqs = {
> + .attr = { .name = "scaling_boost_frequencies",
> + .mode = 0444,
> + },
> + .show = show_available_boost_freqs,
> +};
> +EXPORT_SYMBOL_GPL(cpufreq_freq_attr_boost_available_freqs);
> +
Code redundancy can be reduced by creating a macro for declaring
**_availabe_freqs, its attributes and export symbol.
> /*
> * if you use these, you must assure that the frequency table is valid
> * all the time between get_attr and put_attr!
With this patch alone, we would be using boost frequencies even in
normal cases where we haven't enabled boost.
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
