https://bugzilla.kernel.org/show_bug.cgi?id=58001 --- Comment #2 from Jean-Yves Lefort <jylefort@xxxxxxxxx> 2013-05-12 16:55:08 --- There is no such tool on my system (Fedora 18), I assume this is the same: $ cpupower -c all frequency-info analyzing CPU 0: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 10.0 us. hardware limits: 800 MHz - 2.00 GHz available frequency steps: 2.00 GHz, 2.00 GHz, 1.90 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz available cpufreq governors: conservative, userspace, powersave, ondemand, performance current policy: frequency should be within 800 MHz and 2.00 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 800 MHz. boost state support: Supported: yes Active: yes 25500 MHz max turbo 4 active cores 25500 MHz max turbo 3 active cores 25500 MHz max turbo 2 active cores 25500 MHz max turbo 1 active cores analyzing CPU 1: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 1 maximum transition latency: 10.0 us. hardware limits: 800 MHz - 2.00 GHz available frequency steps: 2.00 GHz, 2.00 GHz, 1.90 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz available cpufreq governors: conservative, userspace, powersave, ondemand, performance current policy: frequency should be within 800 MHz and 2.00 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 800 MHz. boost state support: Supported: yes Active: yes 25500 MHz max turbo 4 active cores 25500 MHz max turbo 3 active cores 25500 MHz max turbo 2 active cores 25500 MHz max turbo 1 active cores analyzing CPU 2: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 2 maximum transition latency: 10.0 us. hardware limits: 800 MHz - 2.00 GHz available frequency steps: 2.00 GHz, 2.00 GHz, 1.90 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz available cpufreq governors: conservative, userspace, powersave, ondemand, performance current policy: frequency should be within 800 MHz and 2.00 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 800 MHz. boost state support: Supported: yes Active: yes 25500 MHz max turbo 4 active cores 25500 MHz max turbo 3 active cores 25500 MHz max turbo 2 active cores 25500 MHz max turbo 1 active cores analyzing CPU 3: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 3 maximum transition latency: 10.0 us. hardware limits: 800 MHz - 2.00 GHz available frequency steps: 2.00 GHz, 2.00 GHz, 1.90 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz available cpufreq governors: conservative, userspace, powersave, ondemand, performance current policy: frequency should be within 800 MHz and 2.00 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 800 MHz. boost state support: Supported: yes Active: yes 25500 MHz max turbo 4 active cores 25500 MHz max turbo 3 active cores 25500 MHz max turbo 2 active cores 25500 MHz max turbo 1 active cores -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
