From: Dirk Brandewie <dirk.j.brandewie@xxxxxxxxx>
There are two ways that the maximum p-state can be clamped, via a
policy change and via the sysfs file.
The acpi-thermal driver adjusts the p-state policy in response to
thermal events. These changes override the users settings ATM.
Use the lowest of the two requested values this ensures that we will
not exceed the requested pstate from either mechanism.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@xxxxxxxxx>
---
drivers/cpufreq/intel_pstate.c | 12 +++++++++---
1 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 5370b8d..c0c98c2 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -117,6 +117,8 @@ struct perf_limits {
int min_perf_pct;
int32_t max_perf;
int32_t min_perf;
+ int max_policy_pct;
+ int max_sysfs_pct;
};
static struct perf_limits limits = {
@@ -125,6 +127,8 @@ static struct perf_limits limits = {
.max_perf = int_tofp(1),
.min_perf_pct = 0,
.min_perf = 0,
+ .max_policy_pct = 100,
+ .max_sysfs_pct = 100,
};
static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
@@ -295,7 +299,8 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b,
if (ret != 1)
return -EINVAL;
- limits.max_perf_pct = clamp_t(int, input, 0 , 100);
+ limits.max_sysfs_pct = clamp_t(int, input, 0 , 100);
+ limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct);
limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100));
return count;
}
@@ -642,8 +647,9 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
limits.min_perf_pct = clamp_t(int, limits.min_perf_pct, 0 , 100);
limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100));
- limits.max_perf_pct = policy->max * 100 / policy->cpuinfo.max_freq;
- limits.max_perf_pct = clamp_t(int, limits.max_perf_pct, 0 , 100);
+ limits.max_policy_pct = policy->max * 100 / policy->cpuinfo.max_freq;
+ limits.max_policy_pct = clamp_t(int, limits.max_policy_pct, 0 , 100);
+ limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct);
limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100));
if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
