This patchset adds AMD specific powersave bias function to the ondemand governor; which can be used to help ondemand governor make more power conscious frequency change decisions based on feedback from hardware (availble on AMD Family 16h and above). Hardware feedback tells software how "sensitive" to frequency changes the workloads are. CPU-bound workloads will be more sensitive -- they will perform better as frequency increases. Memory/IO-bound workloads will be less sensitive -- they will not necessarily perform better as frequnecy increases. This patchset was compared against ondemand governor without powersave bias and did not show any performance degradation on CPU-bound workloads such as kernbench and unixbench. While saving power on Memory-bound workloads such as stream. V3: * Added to CPUID bit to cpufeature.h * Added MODULE_DEVICE_TABLE to autoload this driver. * Other small changes per feedback from: https://lkml.org/lkml/2013/4/2/349 V2: * Added proper include files to amd_freq_sensitivity.c * Only register powersave_bias_target function pointer and not the entire od_ops. Jacob Shin (2): cpufreq: ondemand: allow custom powersave_bias_target handler to be registered cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor arch/x86/include/asm/cpufeature.h | 1 + arch/x86/kernel/cpu/scattered.c | 3 +- drivers/cpufreq/Kconfig.x86 | 17 ++++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/amd_freq_sensitivity.c | 150 ++++++++++++++++++++++++++++++++ drivers/cpufreq/cpufreq_governor.h | 3 + drivers/cpufreq/cpufreq_ondemand.c | 32 +++++-- 7 files changed, 198 insertions(+), 9 deletions(-) create mode 100644 drivers/cpufreq/amd_freq_sensitivity.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
