Highbank processors depend on the external ECME to perform voltage
management based on a requested frequency. Communication between the
A9 cores and the ECME happens over the pl320 IPC channel.
Signed-off-by: Mark Langsdorf <mark.langsdorf@xxxxxxxxxxx>
Reviewed-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
Reviewed-by: Mike Turquette <mturquette@xxxxxxxxxx>
---
Changes from v11
Added a compatible check against calxeda,highbank.
Changes from v10
Now finds a cpu node by searching under /cpus and looking for something
with an operating-points descriptor. This applies to both
highbank-cpufreq and cpufreq-cpu0.
Changes from v9
Added Mike Turquette's reviewed by.
Used to be the 6th patch in the series.
Changes from v8
Added Shawn Guo's reviewed by.
Removed some magic numbers.
Changed failure returns in clk_notify from NOTIFY_STOP to NOTIFY_BAD.
Changes from v7
Removed old attribution to cpufreq-cpu0.
Added some description in the documentation.
Made cpu_dev, cpu_clk into local variables.
Removed __devinit.
Removed some unneeded includes.
Added a brace to clarify some nested if logic.
Changes from v6
Removed devicetree bindings documentation.
Restructured driver to use clk notifications.
Core driver logic is now cpufreq-clk0.
Changes from v5
Changed ipc_transmit() to pl320_ipc_transmit().
Changes from v4
Removed erroneous changes to arch/arm/Kconfig.
Removed unnecessary changes to drivers/cpufreq/Kconfig.arm
Alphabetized additions to arch/arm/mach-highbank/Kconfig
Changed ipc call and header to match new ipc location in
drivers/mailbox.
Changes from v3
None.
Changes from v2
Changed transition latency binding in code to match documentation.
Changes from v1
Added highbank specific Kconfig changes.
arch/arm/boot/dts/highbank.dts | 10 ++++
arch/arm/mach-highbank/Kconfig | 2 +
drivers/cpufreq/Kconfig.arm | 15 +++++
drivers/cpufreq/Makefile | 3 +-
drivers/cpufreq/cpufreq-cpu0.c | 6 +-
drivers/cpufreq/highbank-cpufreq.c | 115 +++++++++++++++++++++++++++++++++++++
6 files changed, 149 insertions(+), 2 deletions(-)
create mode 100644 drivers/cpufreq/highbank-cpufreq.c
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 5927a8d..6aad34a 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -37,6 +37,16 @@
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
+ operating-points = <
+ /* kHz ignored */
+ 1300000 1000000
+ 1200000 1000000
+ 1100000 1000000
+ 800000 1000000
+ 400000 1000000
+ 200000 1000000
+ >;
+ clock-latency = <100000>;
};
cpu@901 {
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 2388085..44b12f9 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,5 +1,7 @@
config ARCH_HIGHBANK
bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index a0b3661..ffe55b8 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -83,3 +83,18 @@ config ARM_SPEAR_CPUFREQ
default y
help
This adds the CPUFreq driver support for SPEAr SOCs.
+
+config ARM_HIGHBANK_CPUFREQ
+ tristate "Calxeda Highbank-based"
+ depends on ARCH_HIGHBANK
+ select CPU_FREQ_TABLE
+ select GENERIC_CPUFREQ_CPU0
+ select PM_OPP
+ select REGULATOR
+
+ default m
+ help
+ This adds the CPUFreq driver for Calxeda Highbank SoC
+ based boards.
+
+ If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index fadc4d4..31e6f19 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -50,8 +50,9 @@ obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
-obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
+obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
+obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
##################################################################################
# PowerPC platform drivers
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 52bf36d..90e9d73 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -179,7 +179,11 @@ static int cpu0_cpufreq_driver_init(void)
struct device_node *np;
int ret;
- np = of_find_node_by_path("/cpus/cpu@0");
+ for_each_child_of_node(of_find_node_by_path("/cpus"), np) {
+ if (of_get_property(np, "operating-points", NULL))
+ break;
+ }
+
if (!np) {
pr_err("failed to find cpu0 node\n");
return -ENOENT;
diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c
new file mode 100644
index 0000000..2ea6276
--- /dev/null
+++ b/drivers/cpufreq/highbank-cpufreq.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver provides the clk notifier callbacks that are used when
+ * the cpufreq-cpu0 driver changes to frequency to alert the highbank
+ * EnergyCore Management Engine (ECME) about the need to change
+ * voltage. The ECME interfaces with the actual voltage regulators.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/mailbox.h>
+
+#define HB_CPUFREQ_CHANGE_NOTE 0x80000001
+#define HB_CPUFREQ_IPC_LEN 7
+#define HB_CPUFREQ_VOLT_RETRIES 15
+
+static int hb_voltage_change(unsigned int freq)
+{
+ int i;
+ u32 msg[HB_CPUFREQ_IPC_LEN];
+
+ msg[0] = HB_CPUFREQ_CHANGE_NOTE;
+ msg[1] = freq / 1000000;
+ for (i = 2; i < HB_CPUFREQ_IPC_LEN; i++)
+ msg[i] = 0;
+
+ return pl320_ipc_transmit(msg);
+}
+
+static int hb_cpufreq_clk_notify(struct notifier_block *nb,
+ unsigned long action, void *hclk)
+{
+ struct clk_notifier_data *clk_data = hclk;
+ int i = 0;
+
+ if (action == PRE_RATE_CHANGE) {
+ if (clk_data->new_rate > clk_data->old_rate)
+ while (hb_voltage_change(clk_data->new_rate))
+ if (i++ > HB_CPUFREQ_VOLT_RETRIES)
+ return NOTIFY_BAD;
+ } else if (action == POST_RATE_CHANGE) {
+ if (clk_data->new_rate < clk_data->old_rate)
+ while (hb_voltage_change(clk_data->new_rate))
+ if (i++ > HB_CPUFREQ_VOLT_RETRIES)
+ return NOTIFY_BAD;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block hb_cpufreq_clk_nb = {
+ .notifier_call = hb_cpufreq_clk_notify,
+};
+
+static int hb_cpufreq_driver_init(void)
+{
+ struct device *cpu_dev;
+ struct clk *cpu_clk;
+ struct device_node *np;
+ int ret;
+
+ if (!of_machine_is_compatible("calxeda,highbank"))
+ return -ENODEV;
+
+ for_each_child_of_node(of_find_node_by_path("/cpus"), np)
+ if (of_get_property(np, "operating-points", NULL))
+ break;
+
+ if (!np) {
+ pr_err("failed to find highbank cpufreq node\n");
+ return -ENOENT;
+ }
+
+ cpu_dev = get_cpu_device(0);
+ if (!cpu_dev) {
+ pr_err("failed to get highbank cpufreq device\n");
+ ret = -ENODEV;
+ goto out_put_node;
+ }
+
+ cpu_dev->of_node = np;
+
+ cpu_clk = clk_get(cpu_dev, NULL);
+ if (IS_ERR(cpu_clk)) {
+ ret = PTR_ERR(cpu_clk);
+ pr_err("failed to get cpu0 clock: %d\n", ret);
+ goto out_put_node;
+ }
+
+ ret = clk_notifier_register(cpu_clk, &hb_cpufreq_clk_nb);
+ if (ret) {
+ pr_err("failed to register clk notifier: %d\n", ret);
+ goto out_put_node;
+ }
+
+out_put_node:
+ of_node_put(np);
+ return ret;
+}
+module_init(hb_cpufreq_driver_init);
+
+MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver");
+MODULE_LICENSE("GPL");
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
