The generic cpufreq-cpu0 driver works well for imx6q before. But it does not work for 1 GHz and 1.2 GHz operating points the series adds here. We ended up with having to add an imx6q specific cpufreq driver to handle those special frequency and voltage scaling requirements for the new operating points. I expect patches #1 and #2 go via cpufreq tree and the #3 through arm-soc tree. Shawn Guo (3): PM / OPP: Export more symbols for module usage cpufreq: add imx6q-cpufreq driver ARM: imx: enable imx6q-cpufreq support arch/arm/boot/dts/imx6q.dtsi | 19 ++- arch/arm/mach-imx/mach-imx6q.c | 64 ++++++++ drivers/base/power/opp.c | 2 + drivers/cpufreq/Kconfig.arm | 9 ++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/imx6q-cpufreq.c | 325 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 414 insertions(+), 6 deletions(-) create mode 100644 drivers/cpufreq/imx6q-cpufreq.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
