The highbank clock will glitch with the current code if the
clock rate is reset without relocking the PLL. Program the PLL
correctly to prevent glitches.
Signed-off-by: Mark Langsdorf <mark.langsdorf@xxxxxxxxxxx>
Signed-off-by: Rob Herring <rob.herring@xxxxxxxxxxx>
Acked-by: Mike Turquette <mturquette@xxxxxxxxxx>
---
Changes from v5
Added Mike Turquette's ack.
Changes from v4
None.
Changes from v3
Changelog text and patch name now correspond to the actual patch.
was clk, highbank: remove non-bypass reset mode.
Changes from v2
None.
Changes from v1:
Removed erroneous reformating.
drivers/clk/clk-highbank.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
index 52fecad..3a0b723 100644
--- a/drivers/clk/clk-highbank.c
+++ b/drivers/clk/clk-highbank.c
@@ -182,8 +182,10 @@ static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate,
reg |= HB_PLL_EXT_ENA;
reg &= ~HB_PLL_EXT_BYPASS;
} else {
+ writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
reg &= ~HB_PLL_DIVQ_MASK;
reg |= divq << HB_PLL_DIVQ_SHIFT;
+ writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
}
writel(reg, hbclk->reg);
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
