The highbank clock will glitch if the clock rate is reset without
relocking the PLL. Remove the option to attempt reseting without
relocking.
Signed-off-by: Mark Langsdorf <mark.langsdorf@xxxxxxxxxxx>
---
Changes from v2:
None
Changes from v1:
Removed erroneous reformating.
drivers/clk/clk-highbank.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-highbank.c b/drivers/clk/clk-highbank.c
index 52fecad..4f50c42 100644
--- a/drivers/clk/clk-highbank.c
+++ b/drivers/clk/clk-highbank.c
@@ -171,7 +171,8 @@ static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate,
writel(reg | HB_PLL_RESET, hbclk->reg);
reg &= ~(HB_PLL_DIVF_MASK | HB_PLL_DIVQ_MASK);
- reg |= (divf << HB_PLL_DIVF_SHIFT) | (divq << HB_PLL_DIVQ_SHIFT);
+ reg |= (divf << HB_PLL_DIVF_SHIFT) |
+ (divq << HB_PLL_DIVQ_SHIFT);
writel(reg | HB_PLL_RESET, hbclk->reg);
writel(reg, hbclk->reg);
@@ -182,8 +183,10 @@ static int clk_pll_set_rate(struct clk_hw *hwclk, unsigned long rate,
reg |= HB_PLL_EXT_ENA;
reg &= ~HB_PLL_EXT_BYPASS;
} else {
+ writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
reg &= ~HB_PLL_DIVQ_MASK;
reg |= divq << HB_PLL_DIVQ_SHIFT;
+ writel(reg | HB_PLL_EXT_BYPASS, hbclk->reg);
}
writel(reg, hbclk->reg);
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
