The driver support single core and multi core ARM SoCs. For multi core, it assume all cores share the same clock and voltage. TODO: - Add each core seperate freq/volt support (MSM). Changes in v3: - move adjusting smp loops_per_jiffy to arm common code, and also adjust global loops_per_jiffy. - remove adjusting loops_per_jiffy in imx and omap cpufreq drivers. - check compatible "generic-cpufreq" when module_init - change printk to pr_xxx - add generic-cpufreq DT binding doc Changes in v2: - add volatage change support - change '_' in property name to '-' - use initial value to calculate loops_per_jiffy - fix reading cpu_volts property bug - let cpufreq_frequency_table_cpuinfo routines handle cpu_freq_khz_max/min - don't change freq in arm_cpufreq_exit, because every core share the same freq. - use unsigned long describe frequency as much as possible. Because clk use unsigned long, but cpufreq use unsigned int. [PATCH V3 1/7] ARM: add cpufreq transiton notifier to adjust [PATCH V3 2/7] arm/imx: cpufreq: remove loops_per_jiffy recalculate [PATCH V3 3/7] cpufreq: OMAP: remove loops_per_jiffy recalculate for [PATCH V3 4/7] cpufreq: add generic cpufreq driver [PATCH V3 5/7] dts/imx6q: add cpufreq property [PATCH V3 6/7] arm/imx6q: register arm_clk as cpu to clkdev [PATCH V3 7/7] arm/imx6q: select ARCH_HAS_CPUFREQ -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
