[PATCH V2 4/6] [CPUFREQ] S5PV210: Lock a mutex while changing the cpu frequency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Arve Hjønnevåg <arve@xxxxxxxxxxx>

Without this lock the call to change the frequency for suspend could
switch to a new frequency while another thread was still changing the
cpu voltage.

Signed-off-by: Arve Hjønnevåg <arve@xxxxxxxxxxx>
Signed-off-by: Jonghwan Choi <jhbird.choi@xxxxxxxxxxx>
Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
---
 drivers/cpufreq/s5pv210-cpufreq.c |   28 +++++++++++++++++++---------
 1 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index 79b1b4e..7fba356 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -26,6 +26,7 @@ static struct clk *cpu_clk;
 static struct clk *dmc0_clk;
 static struct clk *dmc1_clk;
 static struct cpufreq_freqs freqs;
+static DEFINE_MUTEX(set_freq_lock);
 
 /* APLL M,P,S values for 1G/800Mhz */
 #define APLL_VAL_1000	((1 << 31) | (125 << 16) | (3 << 8) | 1)
@@ -199,6 +200,8 @@ static int s5pv210_target(struct cpufreq_policy *policy,
 	int arm_volt, int_volt;
 	int ret = 0;
 
+	mutex_lock(&set_freq_lock);
+
 	if (relation & ENABLE_FURTHER_CPUFREQ)
 		no_cpufreq_access = false;
 
@@ -207,7 +210,8 @@ static int s5pv210_target(struct cpufreq_policy *policy,
 		pr_err("%s:%d denied access to %s as it is disabled"
 				"temporarily\n", __FILE__, __LINE__, __func__);
 #endif
-		return -EINVAL;
+		ret = -EINVAL;
+		goto exit;
 	}
 
 	if (relation & DISABLE_FURTHER_CPUFREQ)
@@ -218,19 +222,23 @@ static int s5pv210_target(struct cpufreq_policy *policy,
 	freqs.old = s5pv210_getspeed(0);
 
 	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
-					   target_freq, relation, &index))
-		return -EINVAL;
+					   target_freq, relation, &index)) {
+		ret = -EINVAL;
+		goto exit;
+	}
 
 	freqs.new = s5pv210_freq_table[index].frequency;
 	freqs.cpu = 0;
 
 	if (freqs.new == freqs.old)
-		return 0;
+		goto exit;
 
 	/* Finding current running level index */
 	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
-					   freqs.old, relation, &priv_index))
-		return -EINVAL;
+					   freqs.old, relation, &priv_index)) {
+		ret = -EINVAL;
+		goto exit;
+	}
 
 	arm_volt = dvs_conf[index].arm_volt;
 	int_volt = dvs_conf[index].int_volt;
@@ -239,12 +247,12 @@ static int s5pv210_target(struct cpufreq_policy *policy,
 		ret = regulator_set_voltage(arm_regulator,
 				arm_volt, arm_volt_max);
 		if (ret)
-			return ret;
+			goto exit;
 
 		ret = regulator_set_voltage(int_regulator,
 				int_volt, int_volt_max);
 		if (ret)
-			return ret;
+			goto exit;
 	}
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
@@ -471,7 +479,9 @@ static int s5pv210_target(struct cpufreq_policy *policy,
 
 	printk(KERN_DEBUG "Perf changed[L%d]\n", index);
 
-	return 0;
+exit:
+	mutex_unlock(&set_freq_lock);
+	return ret;
 }
 
 #ifdef CONFIG_PM
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Kernel Devel]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Forum]     [Linux SCSI]

  Powered by Linux