http://bugzilla.kernel.org/show_bug.cgi?id=13860 --- Comment #4 from pierrearinsal <pierre@xxxxxxxxxxxxxxxxxx> 2009-08-01 19:17:31 --- here some news : suspending and resuming sometimes leads to limit cpu max freq : here is dmesg revelant part : ACPI: Preparing to enter system sleep state S3 [18925.187533] Disabling non-boot CPUs ... [18925.189717] CPU 1 is now offline [18925.189722] SMP alternatives: switching to UP code [18925.198074] CPU1 is down [18925.198104] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [18925.198104] Back to C! [18925.198104] microcode: CPU0: AMD CPU family 0xf not supported [18925.198104] Enabling non-boot CPUs ... [18925.198104] SMP alternatives: switching to SMP code [18925.205900] Booting processor 1 APIC 0x1 ip 0x6000 [18925.197253] Initializing CPU#1 [18925.197253] Calibrating delay using timer specific routine.. 3790.52 BogoMIPS (lpj=1895260) [18925.197253] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [18925.197253] CPU: L2 Cache: 512K (64 bytes/line) [18925.197253] CPU 1/0x1 -> Node 0 [18925.197253] CPU: Physical Processor ID: 0 [18925.197253] CPU: Processor Core ID: 1 [18925.197253] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [18925.276433] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01 [18925.276445] Switch to broadcast mode on CPU1 [18925.277043] Switched to high resolution mode on CPU 1 [18925.278315] microcode: CPU1: AMD CPU family 0xf not supported [18925.279281] CPU1 is up [18925.279284] ACPI: Waking up from system sleep state S3 -- Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
