Hi, I compiled Linux kernel 2.6.27-rc9 on an eeePC 901 with "Intel Atom" processor. I unloaded the acpi-cpufreq module (which is working) and tried if the p4-clockmod also works. I get the following message: [ 611.600115] p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible. [ 611.600135] p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@xxxxxxxxxxxxxxxxxx> Note, that the cpufreq@xxxxxxxxxxxxxxxxxx email address is not working. $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 28 model name : Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping : 2 cpu MHz : 1599.964 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts pni monitor ds_cpl est tm2 ssse3 xtpr lahf_lm bogomips : 3199.92 clflush size : 64 power management: Regards. Márton Németh
[ 0.000000] Linux version 2.6.27-rc9 (user@asus-991157182) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #2 Thu Oct 9 17:35:38 CEST 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable) [ 0.000000] BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data) [ 0.000000] BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x3f7a0 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 [ 0.000000] RAMDISK: 37ee5000 - 37fefa1b [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000FBD10, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 3F7A0000, 003C (r1 A_M_I_ OEMRSDT 10000803 MSFT 97) [ 0.000000] ACPI: FACP 3F7A0200, 0084 (r2 A_M_I_ OEMFACP 10000803 MSFT 97) [ 0.000000] ACPI: DSDT 3F7A05B0, 53DD (r1 P0017 P0017000 0 INTL 20051117) [ 0.000000] ACPI: FACS 3F7AE000, 0040 [ 0.000000] ACPI: APIC 3F7A0390, 005C (r1 A_M_I_ OEMAPIC 10000803 MSFT 97) [ 0.000000] ACPI: MCFG 3F7A03F0, 003C (r1 A_M_I_ OEMMCFG 10000803 MSFT 97) [ 0.000000] ACPI: OEMB 3F7AE040, 0061 (r1 A_M_I_ AMI_OEM 10000803 MSFT 97) [ 0.000000] ACPI: HPET 3F7A5990, 0038 (r1 A_M_I_ OEMHPET 10000803 MSFT 97) [ 0.000000] ACPI: SSDT 3F7AEB80, 04F0 (r1 PmRef CpuPm 3000 INTL 20051117) [ 0.000000] 119MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 38000000 [ 0.000000] low ram: 00000000 - 38000000 [ 0.000000] bootmap 00008000 - 0000f000 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0038000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000100000 - 00003f3bd8] TEXT DATA BSS ==> [0000100000 - 00003f3bd8] [ 0.000000] #2 [0037ee5000 - 0037fefa1b] RAMDISK ==> [0037ee5000 - 0037fefa1b] [ 0.000000] #3 [00003f4000 - 00003f7000] INIT_PG_TABLE ==> [00003f4000 - 00003f7000] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #6 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00038000 [ 0.000000] HighMem 0x00038000 -> 0x0003f7a0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003f7a0 [ 0.000000] On node 0 totalpages: 259903 [ 0.000000] free_area_init_node: node 0, pgdat c038bf60, node_mem_map c1000000 [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 30384 pages, LIFO batch:7 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257871 [ 0.000000] Kernel command line: rw vga=785 irqpoll root=/dev/sda1 log_buf_len=1M [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] log_buf_len: 1048576 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 1599.964 MHz processor. [ 0.010000] Console: colour dummy device 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.010000] Memory: 1025248k/1040000k available (2002k kernel code, 14080k reserved, 620k data, 208k init, 122496k highmem) [ 0.010000] virtual kernel memory layout: [ 0.010000] fixmap : 0xfffee000 - 0xfffff000 ( 68 kB) [ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.010000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.010000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.010000] .init : 0xc0392000 - 0xc03c6000 ( 208 kB) [ 0.010000] .data : 0xc02f4bd3 - 0xc038feb8 ( 620 kB) [ 0.010000] .text : 0xc0100000 - 0xc02f4bd3 (2002 kB) [ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.010000] hpet clockevent registered [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.92 BogoMIPS (lpj=15999640) [ 0.010000] Mount-cache hash table entries: 512 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.010000] CPU: L2 cache: 512K [ 0.010000] Intel machine check architecture supported. [ 0.010000] Intel machine check reporting enabled on CPU#0. [ 0.010000] using mwait in idle threads. [ 0.010000] CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 [ 0.010000] Checking 'hlt' instruction... OK. [ 0.040291] Freeing SMP alternatives: 0k freed [ 0.040302] ACPI: Core revision 20080609 [ 0.053118] Parsing all Control Methods: [ 0.053455] Table [DSDT](id 0001) - 899 Objects with 57 Devices 287 Methods 23 Regions [ 0.053796] Parsing all Control Methods: [ 0.054121] Table [SSDT](id 0002) - 15 Objects with 0 Devices 4 Methods 0 Regions [ 0.054137] tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired [ 0.054158] ACPI: setting ELCR to 0200 (from 0ca8) [ 0.060008] evxfevnt-0091 [00] enable : Transition to ACPI mode successful [ 0.060329] net_namespace: 312 bytes [ 0.060415] NET: Registered protocol family 16 [ 0.060741] No dock devices found. [ 0.060889] ACPI: bus type pci registered [ 0.061024] PCI: Using configuration type 1 for base access [ 0.072451] evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 0.072587] ACPI: EC: Look up EC in DSDT [ 0.074448] Completing Region/Field/Buffer/Package initialization:.......................................................................................................... [ 0.079123] Initialized 22/23 Regions 18/18 Fields 32/33 Buffers 34/35 Packages (923 nodes) [ 0.079140] Initializing Device/Processor/Thermal objects by executing _INI methods:.. [ 0.090254] Executed 2 _INI methods requiring 0 _STA executions (examined 62 objects) [ 0.092533] evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 0 Runtime GPEs in this block [ 0.092568] ACPI: Interpreter enabled [ 0.092578] ACPI: (supports S0 S1 S3 S5) [ 0.092615] ACPI: Using PIC for interrupt routing [ 0.106907] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.106923] ACPI: EC: driver started in poll mode [ 0.107136] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.107289] PCI: 0000:00:02.0 reg 10 32bit mmio: [f7f00000, f7f7ffff] [ 0.107297] PCI: 0000:00:02.0 reg 14 io port: [dc80, dc87] [ 0.107304] PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff] [ 0.107312] PCI: 0000:00:02.0 reg 1c 32bit mmio: [f7ec0000, f7efffff] [ 0.107347] PCI: 0000:00:02.1 reg 10 32bit mmio: [f7f80000, f7ffffff] [ 0.107466] PCI: 0000:00:1b.0 reg 10 64bit mmio: [f7eb8000, f7ebbfff] [ 0.107527] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.107541] pci 0000:00:1b.0: PME# disabled [ 0.107621] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.107633] pci 0000:00:1c.0: PME# disabled [ 0.107723] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.107735] pci 0000:00:1c.1: PME# disabled [ 0.107815] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.107827] pci 0000:00:1c.2: PME# disabled [ 0.107906] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.107919] pci 0000:00:1c.3: PME# disabled [ 0.107980] PCI: 0000:00:1d.0 reg 20 io port: [d480, d49f] [ 0.108053] PCI: 0000:00:1d.1 reg 20 io port: [d800, d81f] [ 0.108124] PCI: 0000:00:1d.2 reg 20 io port: [d880, d89f] [ 0.108195] PCI: 0000:00:1d.3 reg 20 io port: [dc00, dc1f] [ 0.108270] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f7eb7c00, f7eb7fff] [ 0.108333] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.108346] pci 0000:00:1d.7: PME# disabled [ 0.108513] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.108529] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.108583] PCI: 0000:00:1f.2 reg 10 io port: [0, 7] [ 0.108593] PCI: 0000:00:1f.2 reg 14 io port: [0, 3] [ 0.108603] PCI: 0000:00:1f.2 reg 18 io port: [0, 7] [ 0.108613] PCI: 0000:00:1f.2 reg 1c io port: [0, 3] [ 0.108623] PCI: 0000:00:1f.2 reg 20 io port: [ffa0, ffaf] [ 0.108658] pci 0000:00:1f.2: PME# supported from D3hot [ 0.108670] pci 0000:00:1f.2: PME# disabled [ 0.108729] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f] [ 0.108903] PCI: 0000:04:00.0 reg 10 64bit mmio: [fbfc0000, fbffffff] [ 0.108917] PCI: 0000:04:00.0 reg 18 io port: [ec80, ecff] [ 0.108989] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.109002] pci 0000:04:00.0: PME# disabled [ 0.109062] PCI: bridge 0000:00:1c.1 io port: [e000, efff] [ 0.109069] PCI: bridge 0000:00:1c.1 32bit mmio: [fbf00000, fbffffff] [ 0.109212] PCI: 0000:01:00.0 reg 10 32bit mmio: [fbef0000, fbefffff] [ 0.109295] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.109308] pci 0000:01:00.0: PME# disabled [ 0.109370] PCI: bridge 0000:00:1c.3 32bit mmio: [f8000000, fbefffff] [ 0.109382] PCI: bridge 0000:00:1c.3 64bit mmio pref: [f0000000, f6ffffff] [ 0.109446] pci 0000:00:1e.0: transparent bridge [ 0.109500] bus 00 -> node 0 [ 0.109515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.110124] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.110366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.110604] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.110882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.138269] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.138561] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.138843] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.139126] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.139408] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.139694] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.139982] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.140305] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.140637] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.140702] pnp: PnP ACPI init [ 0.140722] ACPI: bus type pnp registered [ 0.145271] pnp: PnP ACPI: found 13 devices [ 0.145283] ACPI: ACPI bus type pnp unregistered [ 0.145618] SCSI subsystem initialized [ 0.145667] libata version 3.00 loaded. [ 0.146025] PCI: Using ACPI for IRQ routing [ 0.146225] ACPI: RTC can wake from S4 [ 0.146225] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 0.146225] system 00:08: ioport range 0x25c-0x25f has been reserved [ 0.146225] system 00:08: ioport range 0x380-0x383 has been reserved [ 0.146225] system 00:08: ioport range 0x400-0x41f has been reserved [ 0.146225] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.146225] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.146225] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.146225] system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved [ 0.146225] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.146225] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.146225] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.146225] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.146225] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 0.146225] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.146225] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.146225] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved [ 0.146225] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.146225] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 0.146225] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.146225] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved [ 0.181987] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 [ 0.182000] pci 0000:00:1c.0: IO window: disabled [ 0.182015] pci 0000:00:1c.0: MEM window: disabled [ 0.182026] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.182043] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 0.182054] pci 0000:00:1c.1: IO window: 0xe000-0xefff [ 0.182068] pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff [ 0.182081] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.182096] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 0.182106] pci 0000:00:1c.2: IO window: disabled [ 0.182118] pci 0000:00:1c.2: MEM window: disabled [ 0.182130] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.182146] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01 [ 0.182155] pci 0000:00:1c.3: IO window: disabled [ 0.182168] pci 0000:00:1c.3: MEM window: 0xf8000000-0xfbefffff [ 0.182182] pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f6ffffff [ 0.182201] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.182210] pci 0000:00:1e.0: IO window: disabled [ 0.182223] pci 0000:00:1e.0: MEM window: disabled [ 0.182234] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.182618] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3 [ 0.182630] PCI: setting IRQ 3 as level-triggered [ 0.182638] pci 0000:00:1c.0: PCI INT A -> Link[LNKA] -> GSI 3 (level, low) -> IRQ 3 [ 0.182655] pci 0000:00:1c.0: setting latency timer to 64 [ 0.182974] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 0.182985] PCI: setting IRQ 5 as level-triggered [ 0.182993] pci 0000:00:1c.1: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 0.183009] pci 0000:00:1c.1: setting latency timer to 64 [ 0.183324] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.183335] PCI: setting IRQ 10 as level-triggered [ 0.183343] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 0.183359] pci 0000:00:1c.2: setting latency timer to 64 [ 0.183675] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.183686] PCI: setting IRQ 11 as level-triggered [ 0.183694] pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.183711] pci 0000:00:1c.3: setting latency timer to 64 [ 0.183723] pci 0000:00:1e.0: setting latency timer to 64 [ 0.183729] bus: 00 index 0 io port: [0, ffff] [ 0.183738] bus: 00 index 1 mmio: [0, ffffffff] [ 0.183746] bus: 05 index 0 mmio: [0, 0] [ 0.183754] bus: 05 index 1 mmio: [0, 0] [ 0.183761] bus: 05 index 2 mmio: [0, 0] [ 0.183769] bus: 05 index 3 mmio: [0, 0] [ 0.183777] bus: 04 index 0 io port: [e000, efff] [ 0.183786] bus: 04 index 1 mmio: [fbf00000, fbffffff] [ 0.183795] bus: 04 index 2 mmio: [0, 0] [ 0.183803] bus: 04 index 3 mmio: [0, 0] [ 0.183811] bus: 03 index 0 mmio: [0, 0] [ 0.183818] bus: 03 index 1 mmio: [0, 0] [ 0.183826] bus: 03 index 2 mmio: [0, 0] [ 0.183834] bus: 03 index 3 mmio: [0, 0] [ 0.183841] bus: 01 index 0 mmio: [0, 0] [ 0.183849] bus: 01 index 1 mmio: [f8000000, fbefffff] [ 0.183859] bus: 01 index 2 mmio: [f0000000, f6ffffff] [ 0.183867] bus: 01 index 3 mmio: [0, 0] [ 0.183875] bus: 06 index 0 mmio: [0, 0] [ 0.183883] bus: 06 index 1 mmio: [0, 0] [ 0.183891] bus: 06 index 2 mmio: [0, 0] [ 0.183898] bus: 06 index 3 io port: [0, ffff] [ 0.183907] bus: 06 index 4 mmio: [0, ffffffff] [ 0.183955] NET: Registered protocol family 2 [ 0.184085] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.184242] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.185271] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 0.185524] TCP: Hash tables configured (established 131072 bind 65536) [ 0.185538] TCP reno registered [ 0.185701] NET: Registered protocol family 1 [ 0.185886] checking if image is initramfs... it is [ 0.312749] Freeing initrd memory: 1066k freed [ 0.313735] highmem bounce pool size: 64 pages [ 0.314064] aufs 20081006 [ 0.314079] msgmni has been set to 1765 [ 0.314095] io scheduler noop registered [ 0.314103] io scheduler deadline registered (default) [ 0.314124] pci 0000:00:02.0: Boot video device [ 0.314400] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.314452] pcieport-driver 0000:00:1c.0: found MSI capability [ 0.314464] pci_express 0000:00:1c.0:pcie00: allocate port service [ 0.314539] pci_express 0000:00:1c.0:pcie02: allocate port service [ 0.314670] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.314720] pcieport-driver 0000:00:1c.1: found MSI capability [ 0.314732] pci_express 0000:00:1c.1:pcie00: allocate port service [ 0.314793] pci_express 0000:00:1c.1:pcie02: allocate port service [ 0.314923] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.314974] pcieport-driver 0000:00:1c.2: found MSI capability [ 0.314985] pci_express 0000:00:1c.2:pcie00: allocate port service [ 0.315045] pci_express 0000:00:1c.2:pcie02: allocate port service [ 0.315175] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.315225] pcieport-driver 0000:00:1c.3: found MSI capability [ 0.315236] pci_express 0000:00:1c.3:pcie00: allocate port service [ 0.315297] pci_express 0000:00:1c.3:pcie02: allocate port service [ 0.315708] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1200k, total 7872k [ 0.315724] vesafb: mode is 640x480x16, linelength=1280, pages=11 [ 0.315733] vesafb: scrolling: redraw [ 0.315742] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.325688] Console: switching to colour frame buffer device 80x30 [ 0.335671] fb0: VESA VGA frame buffer device [ 0.389803] Linux agpgart interface v0.103 [ 0.390130] agpgart-intel 0000:00:00.0: Intel 945GME Chipset [ 0.390545] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 0.408488] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.414326] [drm] Initialized drm 1.1.0 20060810 [ 0.419886] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 3 (level, low) -> IRQ 3 [ 0.430853] pci 0000:00:02.0: setting latency timer to 64 [ 0.431163] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 0.438662] brd: module loaded [ 0.445074] loop: module loaded [ 0.450360] tun: Universal TUN/TAP device driver, 1.6 [ 0.455721] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.461588] Driver 'sd' needs updating - please use bus_type methods [ 0.467233] ata_piix 0000:00:1f.2: version 2.12 [ 0.467259] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.478596] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 0.484588] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.484660] scsi0 : ata_piix [ 0.490656] scsi1 : ata_piix [ 0.499608] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.505579] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.520039] Switched to high resolution mode on CPU 0 [ 0.870541] ata2.00: ATA-5: ASUS-PHISON SSD, TST2.04U, max UDMA/66 [ 0.876698] ata2.00: 7880544 sectors, multi 0: LBA [ 0.883012] ata2.01: ATA-5: ASUS-PHISON SSD, TST2.04P, max UDMA/66 [ 0.889261] ata2.01: 31522176 sectors, multi 0: LBA [ 0.910443] ata2.00: configured for UDMA/66 [ 0.930426] ata2.01: configured for UDMA/66 [ 0.936350] scsi 1:0:0:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ: 0 ANSI: 5 [ 0.948351] sd 1:0:0:0: [sda] 7880544 512-byte hardware sectors (4035 MB) [ 0.954467] sd 1:0:0:0: [sda] Write Protect is off [ 0.960487] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.960547] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 0.972729] sd 1:0:0:0: [sda] 7880544 512-byte hardware sectors (4035 MB) [ 0.979092] sd 1:0:0:0: [sda] Write Protect is off [ 0.985304] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.985357] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 0.997568] sda: sda1 sda2 sda3 sda4 [ 1.005279] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.011532] scsi 1:0:1:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ: 0 ANSI: 5 [ 1.024086] sd 1:0:1:0: [sdb] 31522176 512-byte hardware sectors (16139 MB) [ 1.030535] sd 1:0:1:0: [sdb] Write Protect is off [ 1.036756] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.036807] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.049152] sd 1:0:1:0: [sdb] 31522176 512-byte hardware sectors (16139 MB) [ 1.055530] sd 1:0:1:0: [sdb] Write Protect is off [ 1.061792] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.061852] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.074648] sdb: sdb1 [ 1.082594] sd 1:0:1:0: [sdb] Attached SCSI disk [ 1.089233] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.133582] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.140190] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.147153] mice: PS/2 mouse device common for all mice [ 1.154116] cpuidle: using governor ladder [ 1.160678] cpuidle: using governor menu [ 1.167093] dca service started, version 1.4 [ 1.173440] TCP cubic registered [ 1.179567] NET: Registered protocol family 17 [ 1.185768] Using IPI Shortcut mode [ 1.192589] Freeing unused kernel memory: 208k freed [ 1.212619] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.239002] kjournald starting. Commit interval 5 seconds [ 1.240981] EXT3 FS on sda2, internal journal [ 1.240988] EXT3-fs: mounted filesystem with ordered data mode. [ 1.450734] kjournald starting. Commit interval 5 seconds [ 1.452505] EXT3 FS on sdb1, internal journal [ 1.452512] EXT3-fs: mounted filesystem with ordered data mode. [ 3.318087] input: ImPS/2 Logitech Wheel Mouse as /class/input/input1 [ 5.356611] snd_hda_intel: Unknown parameter `power_save' [ 5.374252] Driver 'sr' needs updating - please use bus_type methods [ 5.412586] ACPI: AC Adapter [AC0] (on-line) [ 5.430695] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 5.829486] ACPI: Battery Slot [BAT0] (battery present) [ 5.848256] ACPI: SSDT 3F7AE180, 023C (r1 PmRef Cpu0Ist 3000 INTL 20051117) [ 5.848367] Parsing all Control Methods: [ 5.848699] Table [SSDT](id 00DA) - 6 Objects with 0 Devices 3 Methods 0 Regions [ 5.849133] ACPI: SSDT 3F7AE450, 0724 (r1 PmRef Cpu0Cst 3001 INTL 20051117) [ 5.849181] Parsing all Control Methods: [ 5.849509] Table [SSDT](id 00DB) - 1 Objects with 0 Devices 1 Methods 0 Regions [ 5.849901] Monitor-Mwait will be used to enter C-1 state [ 5.849907] Monitor-Mwait will be used to enter C-2 state [ 5.849980] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 5.850075] processor ACPI0007:00: registered as cooling_device0 [ 5.850083] ACPI: Processor [P001] (supports 8 throttling states) [ 5.858393] input: Power Button (FF) as /class/input/input2 [ 5.871440] ACPI: Power Button (FF) [PWRF] [ 5.871653] input: Lid Switch as /class/input/input3 [ 5.909584] ACPI: Lid Switch [LID] [ 5.909719] input: Sleep Button (CM) as /class/input/input4 [ 5.980301] ACPI: Sleep Button (CM) [SLPB] [ 5.980410] input: Power Button (CM) as /class/input/input5 [ 6.060322] ACPI: Power Button (CM) [PWRB] [ 6.072446] fuse init (API version 7.9) [ 6.169366] Marking TSC unstable due to TSC halts in idle [ 6.229835] usbcore: registered new interface driver usbfs [ 6.229886] usbcore: registered new interface driver hub [ 6.229965] usbcore: registered new device driver usb [ 6.236409] usbcore: registered new interface driver usbhid [ 6.236417] usbhid: v2.6:USB HID core driver [ 6.249339] USB Universal Host Controller Interface driver v3.0 [ 6.249772] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7 [ 6.249778] PCI: setting IRQ 7 as level-triggered [ 6.249787] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 7 (level, low) -> IRQ 7 [ 6.249801] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6.249807] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.249876] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 6.249915] uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000d480 [ 6.250278] usb usb1: configuration #1 chosen from 1 choice [ 6.250338] hub 1-0:1.0: USB hub found [ 6.250351] hub 1-0:1.0: 2 ports detected [ 6.360439] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 6.360455] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6.360462] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.360508] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 6.360545] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000d800 [ 6.360759] usb usb2: configuration #1 chosen from 1 choice [ 6.360815] hub 2-0:1.0: USB hub found [ 6.360827] hub 2-0:1.0: 2 ports detected [ 6.470393] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 6.470407] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6.470414] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.470458] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 6.470495] uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000d880 [ 6.470711] usb usb3: configuration #1 chosen from 1 choice [ 6.470767] hub 3-0:1.0: USB hub found [ 6.470779] hub 3-0:1.0: 2 ports detected [ 6.580391] uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 3 (level, low) -> IRQ 3 [ 6.580405] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 6.580412] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 6.580460] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 6.580497] uhci_hcd 0000:00:1d.3: irq 3, io base 0x0000dc00 [ 6.580712] usb usb4: configuration #1 chosen from 1 choice [ 6.580770] hub 4-0:1.0: USB hub found [ 6.580783] hub 4-0:1.0: 2 ports detected [ 6.754155] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 7 (level, low) -> IRQ 7 [ 6.754175] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6.754181] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.754236] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 6.758169] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.758178] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 6.758191] ehci_hcd 0000:00:1d.7: irq 7, io mem 0xf7eb7c00 [ 6.780073] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 6.780342] usb usb5: configuration #1 chosen from 1 choice [ 6.780400] hub 5-0:1.0: USB hub found [ 6.780412] hub 5-0:1.0: 8 ports detected [ 7.328944] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 7.398900] pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 [ 7.398985] hpdriver 0000:00:1c.0:pcie02: service driver hpdriver loaded [ 7.399017] pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0 [ 8.400090] pciehp: Device 0000:04:00.0 already exists at 4:0, cannot hot-add [ 8.400098] pciehp: Cannot add device 0x4:0 [ 9.410107] hpdriver 0000:00:1c.1:pcie02: service driver hpdriver loaded [ 9.410190] pciehp: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0 [ 9.410265] hpdriver 0000:00:1c.2:pcie02: service driver hpdriver loaded [ 9.411597] pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0 [ 10.420121] pciehp: Device 0000:01:00.0 already exists at 1:0, cannot hot-add [ 10.420129] pciehp: Cannot add device 0x1:0 [ 11.430096] hpdriver 0000:00:1c.3:pcie02: service driver hpdriver loaded [ 11.430145] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 25.616994] usbcore: registered new interface driver libusual [ 25.624295] Initializing USB Mass Storage driver... [ 25.624336] usbcore: registered new interface driver usb-storage [ 25.624342] USB Mass Storage support registered. [ 611.600115] p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible. [ 611.600135] p4-clockmod: Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@xxxxxxxxxxxxxxxxxx>
