This is more appropriate for the pacemaker list On 08/17/2012 02:59 PM, Yount, William D wrote: > I have two servers. I am using pacemaker/cman(corosync). I am trying to > share an IP address between them. I would like the IP address to run on > both servers at the same time. However, my testing has shown that the IP > address stays locked onto Server2. If I put Server2 in standby, then the > IP address is no longer reachable even though it shows it is running on > Server1. I was wondering if anyone could spot the reason why in the > configuration below: > > > > <cib epoch="1177" num_updates="0" admin_epoch="0" > validate-with="pacemaker-1.2" cib-last-written="Thu Aug 16 20:49:46 > 2012" crm_feature_set="3.0.6" update-origin="Server2" > update-client="crmd" have-quorum="1" dc-uuid=" Server1"> > > <configuration> > > <crm_config> > > <cluster_property_set id="cib-bootstrap-options"> > > <nvpair id="cib-bootstrap-options-dc-version" name="dc-version" > value="1.1.7-6.el6-148fccfd5985c5590cc601123c6c16e966b85d14"/> > > <nvpair id="cib-bootstrap-options-cluster-infrastructure" > name="cluster-infrastructure" value="cman"/> > > <nvpair id="cib-bootstrap-options-expected-quorum-votes" > name="expected-quorum-votes" value="2"/> > > <nvpair id="cib-bootstrap-options-stonith-enabled" > name="stonith-enabled" value="false"/> > > <nvpair id="cib-bootstrap-options-no-quorum-policy" > name="no-quorum-policy" value="ignore"/> > > <nvpair id="cib-bootstrap-options-last-lrm-refresh" > name="last-lrm-refresh" value="1345168331"/> > > </cluster_property_set> > > </crm_config> > > <nodes> > > <node id=" Server1" type="normal" uname="Server1"> > > <instance_attributes id="nodes-Server1"> > > <nvpair id="nodes- Server1-standby" name="standby" value="off"/> > > </instance_attributes> > > </node> > > <node id="Server2" type="normal" uname="Server2"> > > <instance_attributes id="nodes-Server2"> > > <nvpair id="nodes- Server2-standby" name="standby" value="off"/> > > </instance_attributes> > > </node> > > </nodes> > > <resources> > > <clone id="cl_IPaddr2_1"> > > <meta_attributes id="cl_IPaddr2_1-meta_attributes"> > > <nvpair id="cl_IPaddr2_1-meta_attributes-clone-max" > name="clone-max" value="2"/> > > <nvpair id="cl_IPaddr2_1-meta_attributes-notify" name="notify" > value="true"/> > > <nvpair id="cl_IPaddr2_1-meta_attributes-interleave" > name="interleave" value="true"/> > > </meta_attributes> > > <primitive id="res_IPaddr2_1" class="ocf" provider="heartbeat" > type="IPaddr2"> > > <instance_attributes id="res_IPaddr2_1-instance_attributes"> > > <nvpair id="nvpair-res_IPaddr2_1-ip" name="ip" > value="10.89.99.30"/> > > <nvpair id="nvpair-res_IPaddr2_1-cidr_netmask" > name="cidr_netmask" value="22"/> > > </instance_attributes> > > <operations id="res_IPaddr2_1-operations"> > > <op interval="0" id="op-res_IPaddr2_1-start" name="start" > timeout="20"/> > > <op interval="0" id="op-res_IPaddr2_1-stop" name="stop" > timeout="20"/> > > <op id="op-res_IPaddr2_1-monitor" name="monitor" > interval="10" timeout="20" start-delay="0"/> > > </operations> > > <meta_attributes id="res_IPaddr2_1-meta_attributes"/> > > </primitive> > > </clone> > > </resources> > > <constraints/> > > <op_defaults> > > <meta_attributes id="op-options"> > > <nvpair id="op-options-timeout" name="timeout" value="240s"/> > > </meta_attributes> > > </op_defaults> > > <rsc_defaults> > > <meta_attributes id="rsc-options"> > > <nvpair id="rsc-options-resource-stickiness" > name="resource-stickiness" value="100"/> > > </meta_attributes> > > </rsc_defaults> > > </configuration> > > </cib> > > > > > > Thanks, > > William > > > > > > _______________________________________________ > discuss mailing list > discuss@xxxxxxxxxxxx > http://lists.corosync.org/mailman/listinfo/discuss > _______________________________________________ discuss mailing list discuss@xxxxxxxxxxxx http://lists.corosync.org/mailman/listinfo/discuss
