If your nodes are VMs then, use fence_virsh. On 04/12/13 04:51, Orlando Rodríguez Muñoz wrote: > Hi, > > I'm using KVM Qemu. > > Shared disks: iSCSI > File System: GFS2 > > ________________________________________ > De: linux-cluster-bounces@xxxxxxxxxx [linux-cluster-bounces@xxxxxxxxxx] en nombre de Digimer [lists@xxxxxxxxxx] > Enviado: lunes, 02 de diciembre de 2013 19:47 > Para: linux clustering > Asunto: Re: cman Unfencing self... fence_node: cannot connect to cman [FAILED] > > You haven't configured fencing at all. Do your nodes have > IPMI/iLO/iDRAC/etc? > > On 02/12/13 14:40, Orlando Rodríguez Muñoz wrote: >> hi, >> >> I have 4 nodes. In the node where I have luci, when cman start: >> >> # service cman start >> Starting cluster: >> Checking if cluster has been disabled at boot... [ OK ] >> Checking Network Manager... [ OK ] >> Global setup... [ OK ] >> Loading kernel modules... [ OK ] >> Mounting configfs... [ OK ] >> Starting cman... [ OK ] >> Waiting for quorum... [ OK ] >> Starting fenced... [ OK ] >> Starting dlm_controld... [ OK ] >> Starting gfs_controld... [ OK ] >> Unfencing self... fence_node: cannot connect to cman >> [FAILED] >> Stopping cluster: >> Leaving fence domain... [ OK ] >> Stopping gfs_controld... [ OK ] >> Stopping dlm_controld... [ OK ] >> Stopping fenced... [ OK ] >> Stopping cman... [ OK ] >> Unloading kernel modules... [ OK ] >> Unmounting configfs... [ OK ] >> >> And my cluster.conf is: >> >> <?xml version="1.0"?> >> <cluster config_version="55" name="Cluster_prueba"> >> <clusternodes> >> <clusternode name="node1" nodeid="1"/> >> <clusternode name="node2" nodeid="2"/> >> <clusternode name="node3" nodeid="3"/><!-- Storage --> >> <clusternode name="node4" nodeid="4"/><!-- Luci --> >> </clusternodes> >> <cman transport="udpu"/> >> <rm> >> <failoverdomains> >> <failoverdomain name="FDomain_servicio_web" ordered="1"> >> <failoverdomainnode name="servidor‐1" priority="1"/> >> <failoverdomainnode name="servidor‐2" priority="2"/> >> </failoverdomain> >> <failoverdomain name="FDomain‐servidor‐1" restricted="1"> >> <failoverdomainnode name="servidor‐1"/> >> </failoverdomain> >> <failoverdomain name="FDomain‐servidor‐2" restricted="1"> >> <failoverdomainnode name="servidor‐2"/> >> </failoverdomain> >> <failoverdomain name="FDomain‐servidor‐discos" restricted="1"> >> <failoverdomainnode name="servidor‐discos"/> >> </failoverdomain> >> <failoverdomain name="FDomain‐servidor‐cluster" restricted="1"> >> <failoverdomainnode name="servidor‐cluster"/> >> </failoverdomain> >> </failoverdomains> >> <resources> >> <ip address="192.168.122.99/24" sleeptime="10"/> >> <script file="/etc/init.d/clvmd" name="Cluster LVM"/> >> <script file="/etc/init.d/gfs2" name="Global File System"/> >> <script file="/etc/init.d/tgtd" name="Iscsi target"/> >> <script file="/etc/init.d/iscsi" name="Iscsi initiator"/> >> <ip address="192.168.122.98/24" sleeptime="10"/> >> <apache config_file="/lv_cluster_1/servicio‐A/etc/httpd/conf/httpd.conf" name="Apache‐servicio‐A" >> server_root="/etc/httpd" shutdown_wait="5"/> >> <clusterfs device="UUID=e0e3d8be‐5348‐87e1‐56ae‐297ed00f690f" fsid="19900" fstype="gfs2" mountpoint="/lv_cluster_1" >> name="Lv_cluster_1"/> >> </resources> >> >> <service domain="FDomain‐servidor‐discos" name="SGroup‐servidor‐discos" recovery="restart"> >> <script ref="Iscsi target"/> >> </service> >> >> <service autostart="0" domain="FDomain_servicio_web" name="SGroup_servicio_web" recovery="relocate"> >> <ip ref="192.168.122.99/24"> >> <script file="/etc/init.d/httpd" name="Httpd"/> >> </ip> >> </service> >> <service autostart="0" domain="FDomain_servicio_web" name="SGroup‐apache‐servicio‐A" recovery="relocate"> >> <ip ref="192.168.122.98/24"> >> <apache ref="Apache‐servicio‐A"/> >> </ip> >> </service> >> >> <service domain="FDomain‐servidor‐cluster" name="SGroup‐servidor‐cluster‐srv" recovery="restart"> >> <script ref="Iscsi initiator"> >> <script ref="Cluster LVM"> >> <clusterfs ref="Lv_cluster_1"/> >> </script> >> </script> >> </service> >> >> <service domain="FDomain‐servidor‐1" name="SGroup‐servidor‐1" recovery="restart"> >> <script ref="Iscsi initiator"> >> <script ref="Cluster LVM"> >> <clusterfs ref="Lv_cluster_1"/> >> </script> >> </script> >> </service> >> >> <service domain="FDomain‐servidor‐2" name="SGroup‐servidor‐2" recovery="restart"> >> <script ref="Iscsi initiator"> >> <script ref="Cluster LVM"> >> <clusterfs ref="Lv_cluster_1"/> >> </script> >> </script> >> </service> >> >> </rm> >> >> </cluster> >> >> I'm newer, I'd like to know about /cman Unfencing self... fence_node: >> cannot connect to cman/. >> >> #service cman status >> >> Found stale pid file >> >> ¿? >> >> THANKS. >> >> > > > -- > Digimer > Papers and Projects: https://alteeve.ca/w/ > What if the cure for cancer is trapped in the mind of a person without > access to education? > > -- > Linux-cluster mailing list > Linux-cluster@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/linux-cluster > -- Digimer Papers and Projects: https://alteeve.ca/w/ What if the cure for cancer is trapped in the mind of a person without access to education? -- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
