On Sat, Mar 23, 2013 at 5:55 AM, Laurence Schuler <laurence.schuler@xxxxxxxx> wrote:
I have a two node cluster that has been running fine for a couple of
months (little to 0 reboots though). We recently updated the software
with the latest Centos 6 software but now the cluster will not start. It
keeps throwing errors during startup when attempting to unfence the
disks. I have hard reset the fiber switch, and reset both hosts, but
when I run fence_sanbox2, I am unable to either enable, disable or even
get status of the switch ports. This is the error I get.
> [root@web1 lschule3]# /usr/sbin/fence_sanbox2 -a 192.168.1.190 -l
> admin -S FCpass.sh -o enable -n 5 -v
> telnet> set binary
> Negotiating binary mode with remote host.
> telnet> open 192.168.1.190 -23
> Trying 192.168.1.190...
> Connected to 192.168.1.190.
> Escape character is '^]'.
>
> Firmware V8.0.13.8.0
>
> r3fc1 login:
>
>
> Establishing connection... Please wait.
>
> *****************************************************
> * *
> * Command Line Interface SHell (CLISH) *
> * *
> *****************************************************
>
> SystemDescription SANbox 5800 FC Switch
> HostName r3fc1
> EthIPv4NetworkAddr 192.168.1.190
> EthIPv6NetworkAddr fe80::2c0:00:00:90b
> MACAddress 00:c0:dd:77:10:0b
> WorldWideName 10:00:00:c0:dd:24:09:0b
> SerialNumber 1236H00833
> SymbolicName r3fc1
> ActiveSWVersion V8.0.13.8.0
> ActiveTimestamp Mon Apr 2 18:32:33 2012
> POSTStatus Passed
> LicensedPorts 12
> SwitchMode Full Fabric
>
> The alarm log is empty.
>
> r3fc1 #> r3fc1 #> Failed: Unable to switch to admin section
> [root@web1 lschule3]#
I can manually telnet into the FC switch and execute the appropriate
commands to enable/disable ports. But the fence_sanbox2 script will not.
The fence_sanbox2 code has not changed, however python has been upgraded
from 2.6.6-29 to 2.6.6-36.
Has anyone else seen this? Know of a fix? Am I doing/not doing something
stupid? I seem to recall running this command before during setup and it
worked just fine then.
Thanks for any help!
--
Laurence Schuler (Larry) Laurence.Schuler@xxxxxxxx
Systems Support ADNET Systems, Inc
Scientific Visualization Studio http://svs.gsfc.nasa.gov
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
--
- jim
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
