HA iSCSI with DRBD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I've been attempting to follow the recipe laid-out in the Linbit guide "Highly available iSCSI storage with DRBD and Pacemaker" to create a highly-available iSCSI server on the two servers san1 & san2 but can't quite get the details right:

> crm configure property stonith-enabled=false
> crm configure property no-quorum-policy=ignore
>
> crm configure primitive p_IP-1_254 ocf:heartbeat:IPaddr2 params ip=192.168.1.254 cidr_netmask=24 op monitor interval=30s
>
> crm configure primitive p_DRBD-r0 ocf:linbit:drbd params drbd_resource=r0 op monitor interval=60s
> crm configure ms ms_DRBD-r0 p_DRBD-r0 meta master-max=1 master-node-max=1 clone-max=2 clone-node-max=1 notify=true
>
> crm configure primitive p_iSCSI-san1 ocf:heartbeat:iSCSITarget params iqn=iqn.2012-11.com.example.san1:sda op monitor interval=10s
> crm configure primitive p_iSCSI-san1_0 ocf:heartbeat:iSCSILogicalUnit params target_iqn=iqn.2012-11.com.example.san1:sda lun=0 path=/dev/drbd0 op monitor interval=10s
> crm configure primitive p_iSCSI-san1_1 ocf:heartbeat:iSCSILogicalUnit params target_iqn=iqn.2012-11.com.example.san1:sda lun=1 path=/dev/drbd1 op monitor interval=10s
> crm configure primitive p_iSCSI-san1_2 ocf:heartbeat:iSCSILogicalUnit params target_iqn=iqn.2012-11.com.example.san1:sda lun=2 path=/dev/drbd2 op monitor interval=10s
> crm configure primitive p_iSCSI-san1_3 ocf:heartbeat:iSCSILogicalUnit params target_iqn=iqn.2012-11.com.example.san1:sda lun=3 path=/dev/drbd3 op monitor interval=10s
> crm configure primitive p_iSCSI-san1_4 ocf:heartbeat:iSCSILogicalUnit params target_iqn=iqn.2012-11.com.example.san1:sda lun=4 path=/dev/drbd4 op monitor interval=10s
>
> crm configure group g_iSCSI-san1 p_iSCSI-san1 p_iSCSI-san1_0 p_iSCSI-san1_1 p_iSCSI-san1_2 p_iSCSI-san1_3 p_iSCSI-san1_4 p_IP-1_254
> crm configure order o_DRBD-r0_before_iSCSI-san1 inf: ms_DRBD-r0:promote g_iSCSI-san1:start
> crm configure colocation c_iSCSI_with_DRBD-r0 inf: g_iSCSI-san1 ms_DRBD-r0:Master
> crm configure location l_iSCSI-san1+DRBD-r0 p_IP-1_254 10240: san1

IET (i.e., iscsitarget) is already running (with the default configuration) and DRBD's already correctly configured to create the resource r0...

> resource r0 {
>     volume 0 {
>         device /dev/drbd0 ;
>         disk /dev/sda7 ;
>         meta-disk internal ;
>     }
>     volume 1 {
>         device /dev/drbd1 ;
>         disk /dev/sda8 ;
>         meta-disk internal ;
>     }
>     volume 2 {
>         device /dev/drbd2 ;
>         disk /dev/sda9 ;
>         meta-disk internal ;
>     }
>     volume 3 {
>         device /dev/drbd3 ;
>         disk /dev/sda10 ;
>         meta-disk internal ;
>     }
>     on san1 {
>         address 192.168.1.1:7789 ;
>     }
>     on san2 {
>         address 192.168.1.2:7789 ;
>     }
> }

But the shared IP address won't start nor will the LUN's:

> san1:~ # crm_mon -1
> ============
> Last updated: Thu Jan 17 20:55:55 2013
> Last change: Thu Jan 17 20:55:09 2013 by root via cibadmin on san1
> Stack: openais
> Current DC: san1 - partition with quorum
> Version: 1.1.7-77eeb099a504ceda05d648ed161ef8b1582c7daf
> 2 Nodes configured, 2 expected votes
> 9 Resources configured.
> ============
>
> Online: [ san1 san2 ]
>
>  Master/Slave Set: ms_DRBD-r0 [p_DRBD-r0]
>      Masters: [ san1 ]
>      Slaves: [ san2 ]
>  Resource Group: g_iSCSI-san1
>      p_iSCSI-san1    (ocf::heartbeat:iSCSITarget):    Started san1
>      p_iSCSI-san1_0    (ocf::heartbeat:iSCSILogicalUnit):    Stopped
>      p_iSCSI-san1_1    (ocf::heartbeat:iSCSILogicalUnit):    Stopped
>      p_iSCSI-san1_2    (ocf::heartbeat:iSCSILogicalUnit):    Stopped
>      p_iSCSI-san1_3    (ocf::heartbeat:iSCSILogicalUnit):    Stopped
>      p_iSCSI-san1_4    (ocf::heartbeat:iSCSILogicalUnit):    Stopped
>      p_IP-1_254    (ocf::heartbeat:IPaddr2):    Stopped
>
> Failed actions:
>     p_iSCSI-san1_0_start_0 (node=san1, call=23, rc=1, status=complete): unknown error
>     p_iSCSI-san1_1_start_0 (node=san1, call=26, rc=1, status=complete): unknown error
>     p_iSCSI-san1_2_start_0 (node=san1, call=29, rc=1, status=complete): unknown error
>     p_iSCSI-san1_3_start_0 (node=san1, call=32, rc=1, status=complete): unknown error
>     p_iSCSI-san1_4_start_0 (node=san1, call=35, rc=1, status=complete): unknown error
>     p_iSCSI-san1_0_start_0 (node=san2, call=11, rc=1, status=complete): unknown error
>     p_iSCSI-san1_1_start_0 (node=san2, call=14, rc=1, status=complete): unknown error
>     p_iSCSI-san1_2_start_0 (node=san2, call=17, rc=1, status=complete): unknown error
>     p_iSCSI-san1_3_start_0 (node=san2, call=20, rc=1, status=complete): unknown error
>     p_iSCSI-san1_4_start_0 (node=san2, call=23, rc=1, status=complete): unknown error

What am I doing wrong?

TIA,
Eric Pretorious
Truckee, CA
-- 
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster

[Index of Archives]     [Corosync Cluster Engine]     [GFS]     [Linux Virtualization]     [Centos Virtualization]     [Centos]     [Linux RAID]     [Fedora Users]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite Camping]

  Powered by Linux