I don't think you addressed any of my comments.
On 10/10/2012 11:02 PM, Shanti Pahari wrote:
Thanks!
I updated the fencing method in each of the nodes. But after I added
volume_list = [ "vg_pdcpicpl02", "@PDC-PIC-PL-CL1", "@PDC-PIC-PL-CL2" ]
and
# dracut --hostonly --force /boot/initramfs-$(uname -r).img $(uname -r)
# shutdown -r now "Activating ramdisk LVM changes"
After that when the system tries to boot up:
Kernel panic – not syncing: Attempted to kill init!
So didn’t have luck
Can you help me pls!
-----Original Message-----
From: Digimer [mailto:lists@xxxxxxxxxx]
Sent: Wednesday, 10 October, 2012 11:51 PM
To: linux clustering
Cc: Shanti Pahari
Subject: Re: cannot run cluster service
Your fencing is not setup properly. You define the fence devices, but do not
use them as <method>'s under each node definition. You should be able to
'fence_node <target>' and watch it get rebooted. Until then, your cluster
will hang (by design) the first time there is a problem.
Assuming you want to use clustered LVM, you need to change locking_type to
'3' and, I advise, change 'falllback_to_local_locking' to '0'. This also
requires that the 'clvmd' daemon is running, which in turn needs cman to be
running first.
What is your backing device for the LVM PV?
digimer
On 10/10/2012 03:06 AM, Shanti Pahari wrote:
Dear all,
I have cluster setup with 2 node and created web cluster service on it
but it cannot run.
I have not listed anything in lvm.conf volume_list because once I add
anything in volume_list and reboot the system then I cannot mount and
even cannot read the lv which I created for my web . It throws error
as
error message "not activating volume group lv does not pass activation
filter"
Therefore I didn’t add anything in lvm.conf . Then I try to start my
cluster servers for web server but the service failed.
Please help me so that I can solve this out.
I have attached my cluster.conf , lvdisplay , /var/log/messages and
lvm.conf and my /etc/hosts.
I will be greatful if anyone can help me!
Thanks
And my clustat:
Cluster Status for PDC-PIC-PL-CL @ Wed Oct 10 14:58:05 2012
Member Status: Quorate
Member Name ID
Status
------ ---- ---- ------
PDC-PIC-PL-CL1 1
Online, Local, rgmanager
PDC-PIC-PL-CL2 2
Online, rgmanager
Service Name Owner
(Last) State
------- ---- -----
------ -----
service:ha-web-service
(PDC-PIC-PL-CL1) failed
--
Digimer
Papers and Projects: https://alteeve.ca/w/ "Hydrogen is just a colourless,
odorless gas which, if left alone in sufficient quantities for long periods
of time, begins to think about itself."
--
Digimer
Papers and Projects: https://alteeve.ca/w/
"Hydrogen is just a colourless, odorless gas which, if left alone in
sufficient quantities for long periods of time, begins to think about
itself."
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
