Regards,
Cherif
Cherif
From: PARAM KRISH <mkparam@xxxxxxxxx>
Date: Sun, 19 Aug 2012 11:46:25 +0530
To: <chemasters@xxxxxxxxx>
Cc: linux clustering<linux-cluster@xxxxxxxxxx>
Subject: Re: [Linux-cluster] RHEL Cluster rpm fresh installation on rhel5 32bit
Yeah, i still believe all these rpm's , lib's must be in the CD's somewhere but i have to mount then one by one to search and install and it might say somebody is missing still ?
I would be using these methods to setup a similar one in Production very soon hence i have to figure out the best methods now to install all these required packages so that i document them to pass on to a different team who do this in Production remotely.
Easier way to install all Clustering stuff as just one bunch is still something that i really look for.
-Param
On Sun, Aug 19, 2012 at 9:06 AM, <chemasters@xxxxxxxxx> wrote:
Mostly in redhat the dependencies for each package are included in the redhat dvd or cds. I think you try to specify your dvd or cds are repositories on the system and then try to install the cluster packages again using the yum command.
Regards,
Cherif
Regards,
Cherif
--
-----Original Message-----
From: Digimer <lists@xxxxxxxxxx>
Sender: linux-cluster-bounces@xxxxxxxxxx
Date: Sat, 18 Aug 2012 23:19:07
To: PARAM KRISH<mkparam@xxxxxxxxx>
Reply-To: linux clustering <linux-cluster@xxxxxxxxxx>
Cc: linux clustering<linux-cluster@xxxxxxxxxx>
Subject: Re: [Linux-cluster] RHEL Cluster rpm fresh installation on rhel5
32bit
On 08/18/2012 10:54 PM, PARAM KRISH wrote:
> Guys, This is definitely very trivial for those who are in red hat for
> several years.
>
> I have registered for an evaluation copy of rhel5 32bit and download all
> the 5 discs, and tried installing them but it does not show "Cluster"
> packages during the installation. I attempted this couple times even
> with the installation number (it shows additionally Virtualization
> packages if Installation Number is given). With the EasyInstall, it
> completes the installation quickly but most of the packages are not
> installed.
>
> So, I attempted installing these RPMs manually from disc5 , it throws me
> errors like some dependency rpm's not available as shown below.
>
>
> [root@server1 Cluster]# pwd
> /media/RHEL-5.6 i386 Disc 5/Cluster
>
> [root@server1 Cluster]# ls
> Cluster_Administration-as-IN-5.2-1.noarch.rpm
> Cluster_Administration-ru-RU-5.2-1.noarch.rpm
> Cluster_Administration-bn-IN-5.2-1.noarch.rpm
> Cluster_Administration-si-LK-5.2-1.noarch.rpm
> Cluster_Administration-de-DE-5.2-1.noarch.rpm
> Cluster_Administration-ta-IN-5.2-1.noarch.rpm
> Cluster_Administration-en-US-5.2-1.noarch.rpm
> Cluster_Administration-te-IN-5.2-1.noarch.rpm
> Cluster_Administration-es-ES-5.2-1.noarch.rpm
> Cluster_Administration-zh-CN-5.2-1.noarch.rpm
> Cluster_Administration-fr-FR-5.2-1.noarch.rpm
> Cluster_Administration-zh-TW-5.2-1.noarch.rpm
> Cluster_Administration-gu-IN-5.2-1.noarch.rpm TRANS.TBL
> Cluster_Administration-hi-IN-5.2-1.noarch.rpm
> cluster-cim-0.12.1-2.el5.i386.rpm
> Cluster_Administration-it-IT-5.2-1.noarch.rpm
> cluster-snmp-0.12.1-2.el5.i386.rpm
> Cluster_Administration-ja-JP-5.2-1.noarch.rpm ipvsadm-1.24-12.el5.i386.rpm
> Cluster_Administration-kn-IN-5.2-1.noarch.rpm luci-0.12.2-24.el5.i386.rpm
> Cluster_Administration-ko-KR-5.2-1.noarch.rpm
> modcluster-0.12.1-2.el5.i386.rpm
> Cluster_Administration-ml-IN-5.2-1.noarch.rpm piranha-0.8.4-19.el5.i386.rpm
> Cluster_Administration-mr-IN-5.2-1.noarch.rpm
> rgmanager-2.0.52-9.el5.i386.rpm
> Cluster_Administration-or-IN-5.2-1.noarch.rpm ricci-0.12.2-24.el5.i386.rpm
> Cluster_Administration-pa-IN-5.2-1.noarch.rpm
> system-config-cluster-1.0.57-7.noarch.rpm
> Cluster_Administration-pt-BR-5.2-1.noarch.rpm
>
> [root@server1 Cluster]# rpm -ia ricci-0.12.2-24.el5.i386.rpm
> warning: ricci-0.12.2-24.el5.i386.rpm: Header V3 DSA signature: NOKEY,
> key ID 37017186
> error: Failed dependencies:
> *oddjob is needed by ricci-0.12.2-24.el5.i386*
> *modcluster >= 0.12.0 is needed by ricci-0.12.2-24.el5.i386*
>
> [root@server1 Cluster]# rpm -ia modcluster-0.12.1-2.el5.i386.rpm
> warning: modcluster-0.12.1-2.el5.i386.rpm: Header V3 DSA signature:
> NOKEY, key ID 37017186
> error: Failed dependencies:
> *libcman.so.2 is needed by modcluster-0.12.1-2.el5.i386*
> *oddjob is needed by modcluster-0.12.1-2.el5.i386*
>
>
> I am not an expert in red hat but not a novice too.
> I know i can download these dependency packages one by one but it would
> be endless to me.
> Is there a better way of installing all these Cluster packages at one
> shot to make my life easier ?
> Also, I read in some links talking about up2date but later realize that
> these are not meant for rhel5+ versions. Is that true ?
> My system with the freshInstall do not have up2date installed, i am
> surprised if at all this is supported/available for rhel5 onwards.
>
> I am really looking for a simple solution to install all the dependent
> rpm's for Cluster rather than i search for them one by one.
> If i can do this through yum, i don't have a yum repo setup locally. Is
> there one publicly available ?
>
> My requirement is : I want to setup two RHEL vm's in my MacBook as
> active-passive in cluster for Apache, Squid, Mysql services as a proof
> of concept for my internal business requirement. thanks.
>
> -Param
I've not used RHEL 5 in some time. Is it possible that you use RHEL 6?
Also, if at all possible, 64-bit version. For a test cluster, you can
create a minimal install on 1GB of RAM, so if you have at least 4GB or
RAM on your laptop, you should be fine.
Under RHEL6, you need to enable the High-Availability Add-on groups in
RHN. Not sure if they are called the same on RHEL 5, it's been too long
since I last used it to remember.
--
Digimer
Papers and Projects: https://alteeve.com
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
