Sorry for reopen the thread, but I have new info that maybe can guide us to a solution.
In the documentation I've readed that cman uses trhee UDP ports. Assuming the default configuration:
MULTICAST_ADDR:5405
LOCAL_ADDR:5405
LOCAL_ADDR:5404
The problem is that in my cluster the 5404 port isn't up. Netstat shows the 5405 in both interfaces, but not the 5405 in the local interface. I've also ran tcpdump:
[root@node1]# tcpdump -i eth0 -nn -vv port 5405
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
16:36:35.340412 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 134) 15.15.1.10.5149 > 15.15.1.11.5405: UDP, length 106
16:36:35.340872 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 134) 15.15.1.11.5149 > 15.15.1.10.5405: UDP, length 106
16:36:35.549397 IP (tos 0x0, ttl 1, id 0, offset 0, flags [DF], proto: UDP (17), length: 146) 15.15.1.10.5149 > 239.192.240.165.5405: UDP, length 118
16:36:37.399398 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 134) 15.15.1.10.5149 > 15.15.1.11.5405: UDP, length 106
16:36:37.399845 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 134) 15.15.1.11.5149 > 15.15.1.10.5405: UDP, length 106
16:36:37.608384 IP (tos 0x0, ttl 1, id 0, offset 0, flags [DF], proto: UDP (17), length: 146) 15.15.1.10.5149 > 239.192.240.165.5405: UDP, length 118
16:36:39.458357 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 134) 15.15.1.10.5149 > 15.15.1.11.5405: UDP, length 106
16:36:39.458780 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto: UDP (17), length: 134) 15.15.1.11.5149 > 15.15.1.10.5405: UDP, length 106
16:36:39.667355 IP (tos 0x0, ttl 1, id 0, offset 0, flags [DF], proto: UDP (17), length: 146) 15.15.1.10.5149 > 239.192.240.165.5405: UDP, length 118
[root@node1]# tcpdump -i eth0 -nn -vv port 5404
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
As you can see, I have udp traffic between the two nodes (15.15.1.10 and 15.15.1.11) and between the node and the multicast address (239.192.240.165) but there is no traffic in the 5404 port. Is this normal? I mean, this port should be visible? What can lead to this?
Thank you in advance, Javi
2012/7/17 Javier Vela <jvdiago@xxxxxxxxx>
Hi,
Thank you for the quick reply. I'm going to ask if we can upgrade to Red Hat 5.8.
Moreover, the machines don't have now performance problems (we are still in pre). But all is virtual, under VMWare, so a punctual problem in the VMWare infrastructure can affect us. Do you know some way to test network problems that could affect RHCS?
I tried tcpdump and iperf, but haven't seen anything.
Regards, Javi.2012/7/17 Digimer <lists@xxxxxxxxxx>
On 07/17/2012 03:30 AM, Javier Vela wrote:> 2012/7/16 Javier Vela <jvdiago@xxxxxxxxx <mailto:jvdiago@xxxxxxxxx>>
> Hi, I'm also seeing a lot of log entries in the logs like that:
>
> openais[4264]: [TOTEM] Retransmit List: 34 35 36 37 38 39 3a 3b 3c
>
> I've searched through internet and this happens when there are some
> delay between the nodes, but openais its supposed to recover gracefully.
> Can this be a problem?
>
I saw this happen with a bug in rhel 6.1 when the nodes were too slow.
I'm wondering if a) you have network problems somewhere or b) you have
insufficient performance on your nodes.
Usually it recovers on it's own, but I have seen it run away to the
point where I had to stop the cluster. That was on modest hardware in a
test environment. On all production machines I've seen, it recovered on
it's own.
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
