Re: Creating two different cluster using same set of nodes.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






From: Heiko Nardmann <heiko.nardmann@xxxxxxxxxxxxx>
To: linux-cluster@xxxxxxxxxx
Sent: Wednesday, 1 August 2012 8:49 PM
Subject: Re: [Linux-cluster] Creating two different cluster using same set of nodes.

Am 01.08.2012 16:54, schrieb Zama Ques:
Thanks Digimer for clarifying....

I am trying to create the following setup or rather will say I have been asked to do so .

=====
Cluster Name: ClusterA

Node1: system1.example.com   Priority:1 in Failover Domain
Node2: system2.example.com   Priority:2  in Failover Domain

File System Resource : /data1 - An ext3 file system

=====


Cluster Name : ClusterB

Node1: system1.example.com   Priority:2  in Failover Domain
Node2: system2.example.com   Priority:1  in Failover Domain

File System Resource : /data2 - An ext3 file system
========================================================

What I will achieve with this scenario , is that both the nodes will always be in active mode as one node is having  higher priority in Failover Domain  in one cluster and the other node has higher priority in the other  cluster as shown above. This means that  both the file system resource will always be available in either of the nodes.  And  if  a node goes down  ' suppose system1.example.com ' which is active in
'ClusterA' , cluster ,  the file system resource   /data1 on the cluster will be mounted on system2.example.com which is already having /data2  mounted on  'ClusterB'  

So , based on the above architecture , we are achieving the following
1) Both the mount points will be always available and
2) Both the nodes will be utilized as both the nodes will be in active mode  in either of the cluster  .

Will be great if you have some inputs to achieve the same .

Thanks
Zaman



>  Just one thought: did you intentionally decide against using GFS and favour ext3?

     Nothing intentional here . Was initially trying to check whether it is possible to create two different clusters using same nodes and
     chosen ext3 for this.
     Is it not going to be a useful feature if we allow same nodes to be used in different clusters ?

Thanks
Zaman
 





Regards,

    Heiko


--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster

--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster

[Index of Archives]     [Corosync Cluster Engine]     [GFS]     [Linux Virtualization]     [Centos Virtualization]     [Centos]     [Linux RAID]     [Fedora Users]     [Fedora SELinux]     [Big List of Linux Books]     [Yosemite Camping]

  Powered by Linux