A cluster without fencing it's not a good idea, but as you know that's your choice
2012/6/20 Javier Vela <jvdiago@xxxxxxxxx>
As I readed, if you use HA-LVM you don't need fencing because of vg tagging. Is It absolutely mandatory to use fencing with qdisk?
If it is, i supose i can use manual_fence, but in production I also won't use fencing.
Regards, Javi.
Date: Wed, 20 Jun 2012 14:45:28 +0200
From: emi2fast@xxxxxxxxx
To: linux-cluster@xxxxxxxxxx
Subject: Re: Node can't join already quorated cluster
If you don't wanna use a real fence divice, because you only do some test, you have to use fence_manual agent2012/6/20 Javier Vela <jvdiago@xxxxxxxxx>
Hi, I have a very strange problem, and after searching through lot of forums, I haven't found the solution. This is the scenario:
Two node cluster with Red Hat 5.7, HA-LVM, no fencing and quorum disk. I start qdiskd, cman and rgmanager on one node. After 5 minutes, finally the fencing finishes and cluster get quorate with 2 votes:
[root@node2 ~]# clustat
Cluster Status for test_cluster @ Wed Jun 20 05:56:39 2012
Member Status: Quorate
Member Name ID Status
------ ---- ---- ------
node1-hb 1 Offline
node2-hb 2 Online, Local, rgmanager
/dev/mapper/vg_qdisk-lv_qdisk 0 Online, Quorum Disk
Service Name Owner (Last) State
------- ---- ----- ------ -----
service:postgres node2 started
Now, I start the second node. When cman reaches fencing, it hangs for 5 minutes aprox, and finally fails. clustat says:
root@node1 ~]# clustat
Cluster Status for test_cluster @ Wed Jun 20 06:01:12 2012
Member Status: Inquorate
Member Name ID Status
------ ---- ---- ------
node1-hb 1 Online, Local
node2-hb 2 Offline
/dev/mapper/vg_qdisk-lv_qdisk 0 Offline
And in /var/log/messages I can see this errors:
Jun 20 06:02:12 node1 openais[6098]: [TOTEM] entering OPERATIONAL state.
Jun 20 06:02:12 node1 openais[6098]: [CLM ] got nodejoin message 15.15.2.10
Jun 20 06:02:13 node1 dlm_controld[5386]: connect to ccs error -111, check ccsd or cluster status
Jun 20 06:02:13 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:13 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:13 node1 ccsd[6090]: Initial status:: Inquorate
Jun 20 06:02:13 node1 gfs_controld[5392]: connect to ccs error -111, check ccsd or cluster status
Jun 20 06:02:13 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:13 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:14 node1 openais[6098]: [TOTEM] entering GATHER state from 9.
Jun 20 06:02:14 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:14 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:14 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:14 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:15 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:15 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:15 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:15 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:15 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:15 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:16 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:16 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:16 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:16 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:17 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:17 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:17 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:17 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] entering GATHER state from 0.
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] Creating commit token because I am the rep.
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] Storing new sequence id for ring 15c
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] entering COMMIT state.
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] entering RECOVERY state.
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] position [0] member 15.15.2.10:
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] previous ring seq 344 rep 15.15.2.10
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] aru e high delivered e received flag 1
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] Did not need to originate any messages in recovery.
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] Sending initial ORF token
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] entering OPERATIONAL state.
Jun 20 06:02:18 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
Jun 20 06:02:18 node1 ccsd[6090]: Error while processing connect: Connection refused
Jun 20 06:02:18 node1 openais[6098]: [TOTEM] entering GATHER state from 9.
Jun 20 06:02:18 node1 ccsd[6090]: Cluster is not quorate. Refusing connection.
And the quorum disk:
[root@node2 ~]# mkqdisk -L -d
kqdisk v0.6.0
/dev/mapper/vg_qdisk-lv_qdisk:
/dev/vg_qdisk/lv_qdisk:
Magic: eb7a62c2
Label: cluster_qdisk
Created: Thu Jun 7 09:23:34 2012
Host: node1
Kernel Sector Size: 512
Recorded Sector Size: 512
Status block for node 1
Last updated by node 2
Last updated on Wed Jun 20 06:17:23 2012
State: Evicted
Flags: 0000
Score: 0/0
Average Cycle speed: 0.000500 seconds
Last Cycle speed: 0.000000 seconds
Incarnation: 4fe1a06c4fe1a06c
Status block for node 2
Last updated by node 2
Last updated on Wed Jun 20 07:09:38 2012
State: Master
Flags: 0000
Score: 0/0
Average Cycle speed: 0.001000 seconds
Last Cycle speed: 0.000000 seconds
Incarnation: 4fe1a06c4fe1a06c
In the other node I don't see any errors in /var/log/messages. One strange thing is that if I start cman on both nodes at the same time, everything works fine and both nodes quorate (until I reboot one node and the problem appears). I've checked that multicast is working properly. With iperf I can send a receive multicast paquets. Moreover I've seen with tcpdump the paquets that openais send when cman is trying to start. I've readed about a bug in RH 5.3 with the same behaviour, but it is solved in RH 5.4.
I don't have Selinux enabled, and Iptables are also disabled. Here is the cluster.conf simplified (with less services and resources). I want to point out one thing. I have allow_kill="0" in order to avoid fencing errors when quorum tries to fence a failed node. As <fence/> is empty, before this stanza I got a lot of messages in /var/log/messages with failed fencing.
<?xml version="1.0"?>
<cluster alias="test_cluster" config_version="15" name="test_cluster">
<fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="-1"/>
<clusternodes>
<clusternode name="node1-hb" nodeid="1" votes="1">
<fence/>
</clusternode>
<clusternode name="node2-hb" nodeid="2" votes="1">
<fence/>
</clusternode>
</clusternodes>
<cman two_node="0" expected_votes="3"/>
<fencedevices/>
<rm log_facility="local4" log_level="7">
<failoverdomains>
<failoverdomain name="etest_cluster_fo" nofailback="1" ordered="1" restricted="1">
<failoverdomainnode name="node1-hb" priority="1"/>
<failoverdomainnode name="node2-hb" priority="2"/>
</failoverdomain>
</failoverdomains>
<resources/>
<service autostart="1" domain="test_cluster_fo" exclusive="0" name="postgres" recovery="relocate">
<ip address="172.24.119.44" monitor_link="1"/>
<lvm name="vg_postgres" vg_name="vg_postgres" lv_name="postgres"/>
<fs device="/dev/vg_postgres/postgres" force_fsck="1" force_unmount="1" fstype="ext3" mountpoint="/var/lib/pgsql" name="postgres" self_fence="0"/>
<script file="/etc/init.d/postgresql" name="postgres">
</script>
</service>
</rm>
<totem consensus="4000" join="60" token="20000" token_retransmits_before_loss_const="20"/>
<quorumd allow_kill="0" interval="1" label="cluster_qdisk" tko="10" votes="1">
<heuristic program="/usr/share/cluster/check_eth_link.sh eth0" score="1" interval="2" tko="3"/>
</quorumd>
</cluster>
The /etc/hosts:
172.24.119.10 node1
172.24.119.34 node2
15.15.2.10 node1-hb node1-hb.localdomain
15.15.2.11 node2-hb node2-hb.localdomain
And the versions:
Red Hat Enterprise Linux Server release 5.7 (Tikanga)
cman-2.0.115-85.el5
rgmanager-2.0.52-21.el5
openais-0.80.6-30.el5
I don't know what else I should try, so if you can give me some ideas, I will be very pleased.
Regards, Javi.
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
--
esta es mi vida e me la vivo hasta que dios quiera
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
--
Linux-cluster mailing list
Linux-cluster@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/linux-cluster
--
esta es mi vida e me la vivo hasta que dios quiera
-- Linux-cluster mailing list Linux-cluster@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/linux-cluster
